Question about 1988 kawasaki GPz 1000 RX

Open Question

Hi pls I need the kick starter chain for my GPZ1000. It keeps cutting.

Posted by Anonymous on

  • Scott Kelley Jul 06, 2010

    what do you mean "cutting"?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I push the button and start cutting, why does the chain kick off?


Review the new chain installation procedure to be sure it was looped over the drive gear correctly. Also, the bar may have readjusted itself after you applied tension and tightened the hardware.

Apr 05, 2016 | McCulloch 14" Electric Chain Saw Mcc1514

1 Answer

I have a 2004 yamaha xvs 250 dragstar, chain came off and after refitting neutral light doesn't work and bike cuts out when kick stand is put down and seems to only start with kickstand up with clutch held...


your bike is made to turn off when ur kick stand is put down IF YOUR IN GEAR but as far as neutral light ur chain when it came lose could of cut a wire for that u should find out if you are get juice to neutral light and just keep working that wire till u find the problem

Feb 11, 2014 | 2004 Yamaha XVS 250 Dragstar

1 Answer

1975 toyota celica ta22 gt won't start


check your fuses and kick starter also check if there is a spark from the plug wire if there is no spark check your coil and the distributor i think the problem will be solve

Jan 20, 2013 | Toyota Celica Cars & Trucks

1 Answer

I have a 2007 yz250f and the kick starter locked up if i remove the spark plug boot i can kick the starter over then put boot back on plug then i can kick it over and it will start then die about 20...


Hi, Motoracer05 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
kickstarter Jammed 05 yz250 Yamaha 2 Stroke
Won start Kick start won even go down it like it stuck Banshee Repairs and...
YAMAHA YZ250 LC Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Aug 24, 2011 | 2007 Yamaha yZ 250

2 Answers

What are the steps to getting the chain saw started and idling? What are next steps to cut tree limbs and oil the chain? This chain saw was given to me without a manual.


If you are a complete novice you should seek some training before attempting to use the machine, as you do not say what model this is we will go through basic starting procedures, fill the fuel tank with fresh fuel mixed with two stroke oil at 25-1, fill the chain oil tank with a non fling chain oil, switch the ignition switch to on, pull the choke fully out, push in the deco valve if fitted, place the machine on the ground, with the tip of the bar away from any obstructions, put your right foot through the back handle to hold the saw down, place your straightened left arm and hand onto the top handle again to hold the machine, now with your right hand crank the engine until it fires once, at this point push the choke fully back in, crank the engine once again until it fires up, flick the trigger to dissengage the part throttle , the machine should now idle.
Be carefull.

Jun 05, 2011 | Poulan Garden

1 Answer

Fuel and two stroke mix pls oil type for chain pls


For almost all modern two-stroke engines, a 50-to-1 mixture is recommended. That requires about 2 1/2 oz. oil for every gallon of gasoline.
  • Use only two-cycle oil for your mixture. This oil is made especially for these engines and can be purchased at gas stations, hardware stores or any other place where you buy regular motor oil.

Mar 20, 2011 | Oregon Cutting Systems Chain Saw Cutting...

1 Answer

Hi, my 16" Ryobi seems to have suddenly gone


When you are cutting you want to keep the chain out of the dirt...dirt will dull a chain so fast it will make your head spin. sound like you need to have the chain sharpened..there are mini grinders available for about 20 bucks that will allow you to sharpen your own chain...if you don't want to go that route then you can take the chain to your local hardware store or possibly a tree cutting service to get it sharpened

Dec 16, 2010 | Ryobi 18-inch Electric Chainsaw Chain Saws

1 Answer

Petrol leaking when turned up side down,Ryobi Chainsaw


Upside down is not a usual sawing position--only upright, or turned to the left or right side is recommended. If you need to undercut something, keep the saw upright and cut with top side of the chain/bar.This can lead to kick-back if the tip comes free of the log/branch, so you need to control the saw carefully. That's also why there is a chain brake on all newer saws. The leaking may be occurring where the fuel lines pass through the wall of the fuel tank. Hope this helps!

May 04, 2010 | Ryobi 18-inch Electric Chainsaw Chain Saws

3 Answers

20" poulan chain saw cuts at angle


Hi
You must have hit a nail or stone with the one side of the chain. When the chain gets duller on one side than the other is what makes a saw cut at a angle. Get the chain sharpened and it should cut straight again.
Sam

Jan 08, 2010 | Poulan Wild Thing 2375 18" Gas Chain Saw...

Not finding what you are looking for?
1988 kawasaki GPz 1000 RX Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...