Question about 2002 Harley Davidson FLHR - FLHRCI Road king

1 Answer

Tail-lights blink when I put a turn-=signal on trailer is hooked up to a motorcycle

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Sounds like you have a bad ground somewhere. Check the ground between your trailer and your bike.

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trailer light hook-up


If this DeVille is trailer-ready, there is a trailer harness fuse box with 10A fuses for tail lights (PPL wire), left turn/stop/tail lights (YEL wire), and right turn/stop/tail lights (DK GRN wire

Oct 16, 2012 | 2001 Cadillac DeVille

1 Answer

I have a 2006 GMC Envoy and I am having a problem with my passenger turn signal on my boat trailer. The brake lights and parking light work fine. The lights are LED. I have tested the plung on the...


is trailer lite fixture grounded good try and wiggle fixture when u hit signal. next try wiggle pig tail on trailer , still no signal. it must be wire from truck, trace back to connection and check all splices. to see if signal light works on trailer unhook pigtail and get a battery charger or another battery, connect a jumper from positive side to signal spot on trailer hook up. hook up ground as well see if light works if not its in the truck for sure.

Apr 01, 2011 | GMC Envoy Cars & Trucks

1 Answer

05 Chevy Colorado trailer harness right turn not working


you must check the connection where the truck harness meets the added trailer harness on the truck itself not the trailer harness.

Apr 04, 2010 | 2005 Chevrolet Colorado

1 Answer

How to wire for a hitch behind the bike for a trailer with lights


Wiring a motorcycle for a trailer is exactly like wiring a car or truck for a trailer hitch. You have to determine what type of lights you want on your trailer. You brake lights, turn signals, and tail lights. So, you get yourself a test light and connect the alligator clip to a good ground.

Now, on the backside of your rear fender is all the wires going to your brake light / tail light assembly and your turn signal lights. Now, I don't have a schematic for a late model FLH but it used to be the red wire was the brake light, the green wire was the tail light and you had a brown wire for one turn signal and a purple wire for the other side. The turn signal wires were actually gray wires with little brown or purple "bands" around the wire out near the bulb.

Step on the brake and use your tester to probe the wires until on lights up. Release the brake to verify the correct wire for the brake lights. Now turn on the right turn signal and probe the wires until you find one blinking. That's the right turn signal wire. Do the same thing to find the left turn signal wire. Now, you shouldn't have very many wires left. So, turn on the headlight and probe until you find a wire that lights up the tester. Now, at this point you should know which wire is which on your bike.

The trailer should have come with a wiring diagram. If not, you'll have to look at the light sockets on the trailer. You should see at least four colored wires. There should be one color wire on one light that is not on the other side light. These are turn signal wires. One color to the right, one color to the left side. Now the other two colors should go to both lights. One color is the brake light wire and the other is the tail light wire.

Now, that you have all the wires identified, simply buy the little connectors and start connecting the proper wires to each other. You'll be trailiering in no time. Good Luck and ride safe

Jan 28, 2010 | 2006 Harley Davidson FLHR Road king

1 Answer

When I hook up my trailer all the break lights,signal lights stop


sounds like the adpater to the hook-up is bad. or your grounds arent completely grounded. thats where i would start before rewiring the trailer.

Nov 19, 2009 | GMC Sierra 2500HD Cars & Trucks

2 Answers

Pressing brake causing blinker issue


The trailer harness that was installed probably has a short inside the box that distributes power to the trailer pig-tail. Remove the trailer harness. You problem will be cured.

Jan 27, 2009 | 1999 Toyota 4Runner

1 Answer

Left turn signal on trailer


ok tdknutson, I'm not clear on this, does the truck left turn signal stop working when u plug the trailer in, or is it the trailer left turn signal that's not working, or both? When u plugged in the test light did it show u had power to that plug in? Let me know the answer to the above, and in the meantime, check the ground on the turn signal at the trailer. Make sure it's not loose, and tightly connected to the frame (or wire). Also, what type plug in do u have? 4, 6, 7 wire?

Oct 27, 2008 | 2003 GMC Envoy

1 Answer

2001 Sportage Trailer wire connections


brown to the tail lights. yellow to left turn signal. green to right turn signal. this is a basic 3 wire hook-up i use all the time w/4wire connectors for all trailers. white wire is not used. ground is established when you hook to the ball.
to find the correct wire to splice to, use a testor (has a clip to the bare wire, and a sharp point to the truck frame). using a needle, push it through a wire to rear light harness. turn on the turn signal. check if the connection is the blinker, testing until you have the blinker wire. the tail lights can be attached to the license plate wire. brakes and blinkers use same wire, so brake lights will work whenever the turn signal is attached.
to be sure everything is working right, have a second person go inside the truck and work the signals, brakes and lights one at a time while you are at the back of the trailer telling what to do.

Oct 24, 2008 | 2001 Kia Sportage

3 Answers

Trailer wiring for 06 GMC Canyon 4x4


exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....

Aug 13, 2008 | 2006 GMC Canyon

Not finding what you are looking for?
2002 Harley Davidson FLHR - FLHRCI Road king Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...