Question about 2006 Harley Davidson FLHR Road king

1 Answer

How do i get the headlight crome ring off, i removed the screw under the headlight, do i pull it off now since it doesn't want to come lose.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Usually, most headlight rings come off by removing the screw at the bottom to the ring and then pull the bottom of the ring out and swing it upwards to disengage a pair of hooks at the top of the ring. That's the way the older models do anyway.

Posted on Jul 06, 2010

Testimonial: "thanks will try this today..."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing and reinstalling a new headlight assembly in a 95 jeep grand cheerokee


LIGHTING Headlights REMOVAL & INSTALLATION Cherokee, Wagoneer and Comanche Models Fig. 1: Remove the top corner headlight bezel mounting screw 91076p12.jpg
Fig. 2: To access the turn signal bulb or headlight bezel mounting screws, remove the 2 turn signal housing retaining screws 91076p13.jpg
Fig. 3: After removing the turn signal housing from the headlight bezel, remove the 2 bezel mounting screws . . . 91076p27.jpg
Fig. 4: . . . then carefully pull the headlight bezel away from the headlight assembly 91076p11.jpg
Fig. 5: Remove the 4 headlight assembly retaining ring screws . . . 91076p07.jpg
Fig. 6: . . . then pull the retaining ring off of the headlight assembly 91076p06.jpg
Fig. 7: Pull the headlight assembly away from the vehicle just far enough to disengage the electrical connector from behind the headlight 91076p28.jpg
  1. Remove the headlamp bezel and retaining ring attaching screws. Remove the bezel and retaining ring.
  2. Pull the headlight out, disconnect the wire harness and remove the headlight from the vehicle.
  3. Install the headlight in the reverse order of removal.
Grand Cherokee and Grand Wagoneer Models
  1. Open the hood, reach into the engine compartment and locate the lock ring supporting the bulb assembly.
  2. Rotate the lock ring 1?8 turn counterclockwise and pull the bulb straight out from the housing. To install:
  3. Install a new bulb and position the bulb assembly in the lamp housing.
  4. Rotate the lock ring 1?8 turn clockwise to secure.
----
The Grand Cherokee will have an assembly that is fastened with bolts and screws to the body.
Get the new assembly and compare to the old one to see where to unfasten the bolts and other fasteners to aid in removing quickly.

Oct 08, 2010 | 1995 Jeep Grand Cherokee

1 Answer

How do i replsce s headlight on a 1983 Omega?


PLEASE DON'T FORGET TO RATE!

  1. Remove the headlamp trim panel (grille panel) attaching screws.
  2. Remove the four headlamp bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlamp aiming screws, at the top and side of the retaining ring, or the headlamp aim will have to be readjusted.
  3. Pull the bulb and ring forward and separate them. Unplug the electrical connector from the rear of the bulb.
  4. Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and install the ring and bulb. Install the trim panel


addf3bf.jpg To remove the headlights, unfasten the retaining screws, then remove the headlight trim


48161cd.jpg Remove the 4 headlight retaining ring screws (A). Do not confuse these with the aiming screws (B)


801c856.jpg Remove the headlight retaining ring, but make sure the headlight doesn't fall out of the assembly


c776dce.jpg Pull the headlight out of the mounting plate, unplug the electrical connector and remove the headlight

Sep 13, 2010 | Oldsmobile Omega Cars & Trucks

1 Answer

How do you remove the headlight from a 1991 mercury capri


take four screws out of housing (two on each side) slide housing toward front of car. remove two screws from crome ring and remove light. reverse to install

Sep 04, 2010 | 1991 Mercury Capri

1 Answer

Need to remove and repair headlight motor on a 1988 corvette


REMOVAL & INSTALLATION 1984–88 Vehicles
  1. Open the hood, then turn the headlights on.
  2. Detach the headlight motor wire on the outer side of the headlight.
  3. Turn the headlights off (the disconnected light should stay open).
  4. Unfasten the 4 screws at the bezel. There are 2 at the front and 2 at the sides. Fig. 1: With the hood in the raised position, unfasten the Torx® screws from the outer side of the headlight bezel/trim piece 91036p23.jpg
    Fig. 2: You must then remove the screws from the inner side of the bezel/trim piece 91036p24.jpg

  5. Remove the bezel. Fig. 3: Remove the first of the top bezel/retaining ring screws . . . 91036p25.jpg
    Fig. 4: . . . then remove the remaining Torx® screw 91036p26.jpg
    Fig. 5: Lift the bezel/trim piece away from the headlight assembly 91036p27.jpg

  6. Remove the retaining spring by carefully using a hooked end tool, such as a cotter pin removal tool to move it to the side.
  7. Remove the headlight from the aiming pins by rotating the headlight toward the center of the car.
  8. Unfasten the 4 retaining ring screws, then remove the ring. Fig. 6: With the hood closed, you can see the 4 headlight retaining ring screws (1) and 2 aiming screws (2) 91036p28.jpg
    Fig. 7: Remove ONLY the 4 retaining ring screws, do NOT touch the aiming screws 91036p29.jpg

  9. Remove the headlight pump from the mounting bracket, unplugging the socket as you pull it away. Fig. 8: Remove the headlight away from the mounting bracket, unplugging the socket as you pull it away 91036p30.jpg
    To install:
  10. Install the headlight bulb, making sure it is plugged in properly.
  11. Position the retaining ring and secure with the 4 screws.
  12. Position the headlight into the aiming pins. Move the retaining spring back into place.
  13. Install the bezel and secure with the retainers.
  14. Turn the headlights on, then connect the headlight motor wire.
  15. Turn the headlights off. Both should lower.
  16. Close the hood. Check the aim of the headlights, and adjust if necessary.
1989–96 Vehicles
  1. Open the hood.
  2. Open the headlight door halfway. This can be done either by turning the headlight switch on, then back to the parking lamp on position, or by the manual headlamp control knob (which is located on the inboard side of the headlight door). NOTE: Before removing the screws from the side of the headlight bezel, place your hand under the bezel to support and prevent damage to it.
  3. Remove the screws from the front of the headlight bezel. NOTE: Before removing the screws from the side of the headlight bezel, place your hand under the bezel to support and prevent damage to it.
  4. Remove the Phillips head screws from each side of the headlight bezel.
  5. Remove the bezel by pulling it straight out from the engine side of the hood. Fig. 9: View of the headlight bezel mounting 91036g28.gif

  6. Unfasten the screws from the headlight retaining ring.
  7. Remove the headlamp from the assembly, unplugging the electrical connector as you are pulling it away. Fig. 10: Exploded view of the headlight assembly 91036g29.gif
    Fig. 11: Location of the headlight mounting and aiming screws 91036g30.gif
    To install:
  8. Attach the headlight electrical connector.
  9. Position the retaining ring and install the screws securing the ring to the headlight.
  10. Position the bezel in place on the headlight assembly.
  11. Install the screws on each side of the bezel and tighten to 51 inch lbs. (5.8 Nm).
  12. Install the screws on the front of the bezel and tighten to 17 inch lbs. (1.9 Nm).
  13. Cycle the headlamps, then close the hood. Check the headlight aim, and adjust if necessary.
prev.gif next.gif

Jul 07, 2010 | 1988 Chevrolet Corvette

1 Answer

How to replace the headlight on a 1987 chevy el camino


Check this GM Chevy Mid-Size Cars 1964-1988 procedure from Repair Guide...


Headlights - REMOVAL & INSTALLATION
If some or all of the headlight bulbs being replaced still operate, refer to the headlight aiming procedure later in this section to ease checking or adjustment of the headlights after installation.
  1. Disconnect the negative battery cable.
  2. Loosen and remove the retaining screws, then remove the headlight bezel from the front of the vehicle.
  3. On most models, the headlight bulb retaining ring is only held on by retaining screws. If so, remove the bulb retaining ring screws. These are the screws which hold the thin metal ring which holds the bulb against the adjusting plate. Do not touch the two headlight aiming screws, at the center of the top and side of the retaining ring (these screws will have different heads), or the headlight aim will have to be re-adjusted.

One way to identify the retaining ring screws is that they will be threaded through a lip on the outer edge of the retaining ring before threading through the adjusting plate. One the other hand, the adjustment screws are threaded through the adjustment plate and a spring loaded holder underneath it.

23f036c.jpg

Fig. 1: Exploded view of a common dual headlight mounting assembly-1983 Malibu shown typical
  1. Some later model vehicles will use a spring on the retaining ring. If so equipped, disengage the spring from the retaining ring, using a cotter pin removal tool, then remove the retaining ring screws.
  2. Pull the bulb and ring forward and then separate them. Unplug the electrical connector from the rear of the bulb and remove the bulb from the vehicle.
To install:
  1. Plug the new bulb into the electrical connector.
  2. Position the retaining ring over the bulb, then install the assembly to the adjusting plate. Secure using the retaining screws and, if applicable, the spring.
  3. Install and secure the headlight bezel.
  4. Connect the negative battery cable.
f270907.jpg

Loosen and remove the headlight bezel retaining screws

55278f9.jpg

Make sure all of the screws are removed, then pull the bezel from the front of the vehicle

b98b91d.jpg

Loosen and remove the retaining ring screws

b83d4c4.jpg

Pull the retaining ring and bulb forward to separate them


5713f83.jpg

Unplug the electrical connector from the rear of the headlight


Hope helps (remember rated this).

Jul 01, 2010 | 1987 Chevrolet El Camino

1 Answer

2009 hd flhx headlight lamp removal replacement


1 remove the screw on the bottom of the chrome ring 2 remove the three screws from the retaining ring 3 pull headlight out and unplug.To remove the bulb remove rubber boot and push down on wire loop and push end out from under the retainer lip (you can loosen the screw 1/2 to1 turn if needed) remove bulb and replace. The new one turnso that the wider ear is pointing up (use the emblem on front)

Mar 20, 2010 | 2008 Harley Davidson FLHX Street Glide

1 Answer

Removing shifter knob on 07 chevy equinox


There is a set screw under the crome ring at the bottom of the shifter knob. use a small flat screw driver and pry down on the chrome ring and it should come down and the set screw is under the chrome ring

Dec 30, 2009 | 2007 Chevrolet Equinox LS New Cars

1 Answer

How do I change the Driver's side Front Headlight on the 1998 Plymouth Grand Voyager?


  1. Unscrew the three screws that secure the headlight assembly to your Dodge Caravan. Put the screws in your pocket or another safe place, so you won't lose them before reinstalling the headlight assembly.
  2. Pull the headlight assembly away from the front of the vehicle. Turn the bulb retaining ring counterclockwise to unlock the electrical connector. Remove the electrical connector from the bulb assembly by pulling it straight out.
  3. Replace the old bulb with a new halogen headlight bulb. Connect the electrical connector and turn the bulb retaining ring clockwise to lock the bulb into place.
  4. Reinstall the headlight assembly and secure the screws tightly before closing the hood. Turn on your Dodge Caravan, flip on the headlights and verify they're working properly.

Oct 16, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Fender bender, bought new assembly. How to remove old for replacement? "89 seville driver side headlight.


LIGHTING Headlights REMOVAL & INSTALLATION
  1. Unscrew the Torx retaining screws and remove the headlight bezel.
  2. Remove the headlight bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlight aiming screws, at the top and the side of the retaining ring (these screws will have different heads), or the headlight aim will have to be re-adjusted.
  3. Pull the bulb and ring forward, then separate them. Unplug the electrical connector from the rear of the bulb.
  4. Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and then install the ring and the bulb. Install the headlight beze

Aug 23, 2009 | 1989 Cadillac Seville

Not finding what you are looking for?
2006 Harley Davidson FLHR Road king Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...