Question about kawasaki ZX-6R Ninja Motorcycles

2 Answers

Torque settings for front axle on a kawasaki zx6r 2008

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

No its
94 ft/lbs rear axle nut

94 ft/lbs front axle nut

14.5 ft/lbs front axle clamp
bolts , the pinch bolt's that hold thefront axle, there's 4 of them 2 on each side.
I have also seen 92ft/lbs for the axles.

Posted on May 04, 2013

  • Bruce Nguyen May 04, 2013

    you can use what he said but actually the correct specs are
    94 ft/lbs rear axle nut

    94 ft/lbs front axle nut

    14.5 ft/lbs front axle clamp
    bolts , the pinch bolt's that hold thefront axle, there's 4 of them 2 on each side.


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 49 Answers

75 or 80 ft.lbs. i think

Posted on Jul 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Torque specs for 2008 ford ranger 4x2 front axle

Torque Specifications

Description Nm lb-ft Axle-to-frame bolt 66 49 Axle damper-to-frame bolt 34 25 Brake caliper guide pin bolt 33 24 Differential bearing cap bolt 61 45 Differential housing cover bolt 29 21 Ring gear bolt 122 90 Tie-rod nut 91 67 U-joint spider retainer bolt 19 14 Upper ball joint pinch bolt 48 35

Sep 18, 2014 | 2008 Ford Ranger 2WD

1 Answer

Will 08 zx6r triple tree fit 09

hello, the 2008 triple tree will not fit the 2009, the 2008 fork fits only the 05' 06' 07' , if you will need a help with your 2008 zx6r you can get the service manual from the below link:
good luck

Aug 03, 2013 | 2007 kawasaki ZX-6R

1 Answer

What are the torque specs for head cover bolts on a 2008 ninja zx6r?

If you mean head bolts you need to ask a dealer, if you mean valve cover bolts you can look up torque spec's by bolt size just google it look for a flow chart of spec's.

May 06, 2012 | 2006 kawasaki Vulcan 800 Drifter

1 Answer

Changing front tire out, what is the torques on the front axle nut? 2009 KLR 650

Find a manual here:

G Good Luck and ride safe

Feb 22, 2011 | 2008 kawasaki KLR 650

1 Answer

Hi, can you tel me what size hex socket i need to remove the front wheel on my kawasaki zx6r g1

Something tells me you are trying to remove the axle by turning it out?? There is no pressure on the forks. The axle is locked on by 2 set screws or bolts on the bottom of the forks. If there is a nut on the axle, it is easily spun off with an adj wrench, pull out the bottom bolts, axle comes out. That is how most bikes are set up, Unless the kawasaki came up with something different. check it out.

Jun 16, 2010 | 1998 kawasaki ZX-6R Ninja

1 Answer

2002 ZX-9R: what are the torque settings for front and back wh...

Both front & rear axle nuts should be torqued to 125Nm (newton/metres) & the front wheel clamp bolt should be 20Nm

Ride safe
Please mark this as very helpful (if it has been!!)

May 06, 2010 | 2002 kawasaki ZX-9R

1 Answer

Front wheel torque specifications

According to the Service Manual, the Front Axle Bolt should be torqued to 16 for the pinch bolts
58 for the front axle

and in case you need it...

33 for front caliper bolts
14 for front rotor bolT

Mar 04, 2010 | 1995 kawasaki VN 800 A Vulcan

1 Answer

Help channging the front wheel on a kawasaki ninga zx6r 2004 model ? please .

By "changing the front wheel" do you mean how do you remove the wheel from the bike? If so, Start by securing the motorcycle in a upright position and place a jack under the engine with a wood protector between the jack and engine. Raise the motorcycle until the front tire is just touching the ground. Remove both brake calipers then loosen and remove the axle nut. Now remove the axle clamp and slide the axle out of the wheel. Note how the speedometer gear is mounted before pulling the axle. Now raise the motorcycle until the tire assembly will clear the fender. Reassembly is exact reverse of removal with the exception of when you install the axle you will tighten the axle nut before you tighten the axle clamp.

Nov 19, 2009 | 2004 kawasaki ZX-6R

1 Answer

Droped bike handelbars r straight and front wheel is slightly turned 2 da left

You need to loosen and re-torque the fork triple clamp bolts, along with the front wheel axle, and pinch bolts. Do this with the front wheel off of the ground. Your forks may have twisted, and all needs to be loosened, straightened, and re-torqued. can destroy forks if you don't properly torque tripple clamp bolts!!!!

Sep 21, 2009 | 2008 kawasaki Ninja 250R

1 Answer

I replaced my front axle bearings and need the torque specs for front axle bolts

call your local dealer and ask for service department. they can get that torque spec for you

Dec 09, 2008 | 2000 kawasaki VN 1500 Vulcan Classic...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

76846 Answers


Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides