Question about 2002 MZ Skorpion 660 Tour

1 Answer



Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

No it is not common, you are using the front brake to much or the caliper is stuck. Get the front wheel off the ground and turn the wheel see if the wheel turns freely if it does then your not using the brakes properly. However if it does turn free ride it warm up the brakes and check the front wheel again. If it sticks when it is up in the air then you know your problem is the caliper sticking or if it is cableoperated you could have a frayed cable. also check that the rear brakes are adjusted so it grabs before the front brakes. ope this helps and get back to me if you need more help Thanks for using fixya.

Posted on Jul 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Kle 500 clutch drag when cold

Are you using the correct oil? Check owners manual or dealer.

Apr 02, 2014 | 2005 kawasaki KLE 500

3 Answers

When the speed over 50 miles, use of brake will make the car vibration.

Probably warped front brake rotors. This is common on all vehicles.

Jul 19, 2011 | 2007 Lexus ES 350

1 Answer

Are speedmaster front brake discs prone to warping? If so why? just been for mot and front discs are warpped this will be the second set the bike has only done 27000 no crashes well looked after riden all...

I have found that on a tyre change that the discs get damaged (warped) by the person that removes the tyre. They lay the wheel on it side which is a direct contact with the discs to the surface, aply pressure to work on wheel and this way they bend or warp the disk.

Jun 16, 2010 | 2005 Triumph Speedmaster

1 Answer

I have a 2007 triumph bonneville with 4700 miles. My front brake shudders rhythmically when I brake hard. It does stop me but it feels like the abs on a car. What can I do please?

My front brakes would pulsate. I replaced the front disc because it had warped but after 10000kms I had to do it again. After a lot of research I finially got the right answer from a brake disc technician. The hub was warped and needed to be machined, otherwise the disc would end up doing the same. He also replaced the front disc with a floating disc. So far (5000kms) the problem hasn't returned!

Pheff, Australia

Jun 09, 2010 | 2008 Triumph Triumph Bonneville

1 Answer

What are the most common problems with this bike?

You found a 2005 with 2500 miles?? Buy it! There should be no, none, zero problems with that bike. It should be perfect. These bikes are built. I have 3 of them. And with 17,000 miles on my 02 S4, it is still in perfect shape, a couple dings here and there, nothing ,major, sat all winter in a cold garage, charged up the battery and it fired right up and took off down the road. No problem. I take that back, the only thing you might find wrong with it is the battery. They have a short life span. Other than that you can't beat it. You will be hooked on a quality bike. One of mine was crushed by a truck while parked, the guy didn't see it, and he didn't hear it being ground into the pavement cause he just kept on backing up. Left my bike in a puddle of gas. the insurance co, totaled it because of the front end and gas tank damage, they gave me $200 more than I paid for it 4 years earlier. And the insurance guy said if it was a Honda or a Harley, I would have gotten half that. They hold their value. One more thing, they have to be maintained, the valve adj is expensive but worth it. It can be done by anybody who is good with a wrench, but you have to do the math. That is one thing that scares people off. My last valve adj was $600. Hope this helps.

Apr 26, 2010 | 2005 Ducati Monster 620 Dark 2 disc

1 Answer

Hello, I have a 2005 lancer 1600 estate from new. At 27k miles a fault developed that when braking at 40 mph the steering wheel would vibrate. This was fixed by the supplier skimming the front discs. At...

maybe the rotors are bigenuff and heat up too quick and warp but thats what they put on the car so youre out of luck,,,,you could put aftermarket rotors on it that are slotted and or crossdrilled which would greatly reduce the heat and your warping isue,,,,or maybe youre just too hard on the brakes,,try avoid sudden stops and braking at the last minute

Oct 12, 2009 | 2005 Mitsubishi Lancer

1 Answer

94 bmw 525 brakes starting to pulsate when i apply. not everytime but getting to be more frequent! Mike K Bristol

Sounds like you have warped brake discs, pedal starts to rise & lower underfoot as brake applied, buy new discs. Usually the front. Discs wear thin/distort with age due to heat generated when braking.
Have fun changing them.

Oct 02, 2009 | 1994 BMW 5 Series

1 Answer

Sony DAV-SC8. I'm suddenly getting distortion

It sounds like the speakers themselves are the problem rather than the amp.
Although, it would be rare to have overdriven/blown the surrounds.
My suggestion would be to isolate which speakers or channels (on Amp) are at fault.
Swap left and right to see if the problem transfers across.

Sep 13, 2009 | Sony DAV-SC8 System

1 Answer

Front end problems

You seem to have more than one problem, first of all the balding tire you have a negative camber problem that can be adjusted by getting a wheel alignment done. The shaking problem while applying brake could mean that you have bad/warped front rotors. It can also mean bad Tie rods. Lastly it can mean that the front tires needs to be high speed balanced. Good Luck

Dec 09, 2008 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
2002 MZ Skorpion 660 Tour Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top MZ Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Jay Finke
Jay Finke

Level 3 Expert

1358 Answers


Level 2 Expert

545 Answers

Are you a MZ Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides