Question about 2005 kawasaki EN 500 Vulcan
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: fzr1000 fork oil
hello m8,,i had one of these babys,,grab your self a medium grade oil,, if u have a litre bottle u need to put just over a quarter of that bottle in each fork,, or if u have a 500ml bottle pour half a bottle in each fork,, cheers
Posted on Mar 24, 2009
First, go buy amanual ,clymer or haynes shop manual from a dealer or sent a from J&P CYCLE or from DENNIS KIRK , then when you got to work on it you will have somethnig to go by, and not trying to guest if your doing it right. J&P-1 800-318-6847, DENNIS KIRK-1-800-969-7504, and tell them what you need.
Posted on Mar 26, 2009
SOURCE: front fork oil seal replacement
General intructions for most bikes:
Remove front wheel. Loosen fork tube clamps at top and bottom of triple clamps. Slide fork tubes out and remove. Access to seals is from top of tube. Remove cover and unscrew cap. Shop manual for specific bike is $24-$30. Will show detailed instructions.
Posted on May 14, 2009
Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
Posted on Jul 05, 2009
hi buddy to make it idle on carbs there will be a screw turn it in 1/4 of a turn with the machine sarted and on the over flow is due to the floats either to low or sticking strip the bottom bowl off the carbs by 2-4 srews then inside is the float conected by a pivot pin you slide this out once the pin is out the float will come off with the inlet fuel valve still atached by the wire cage side this valve off and then bend the tab upwards the valve was hanging on this picture will demonstrate bud or if its just sticking unfree it with wd40 and then to the forks follow th instructions on this sit buddy http://www.motorcyclistonline.com/howto/replace_fork_seals/index.html
Posted on Sep 04, 2009
Tips for a great answer:
Mar 21, 2018 | 2003 kawasaki KX 125
Jun 28, 2014 | kawasaki Motorcycles
Jun 22, 2012 | kawasaki ZX-6R Ninja Motorcycles
Apr 28, 2012 | 2005 kawasaki KX 250
Oct 19, 2011 | 2000 kawasaki KMX 125
Sep 20, 2010 | 1998 kawasaki KDX 200
Mar 18, 2010 | kawasaki ZX-6R Ninja Motorcycles
May 14, 2009 | 2001 kawasaki KDX 125
Mar 18, 2009 | 2001 kawasaki EL 250 Eliminator V
Mar 01, 2013 | 2005 kawasaki EN 500 Vulcan
364 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: