Question about 2004 KTM EXC 450 Racing

1 Answer

Oil change procedure - 2004 KTM EXC 450 Racing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 524 Answers

Hi
1. stop the engine
2.open the engine oil filling cover
3.nw opne the drain of the oil tank. make sure all the oil has been drained off
4.nw flush the system wid new oil so thet the remaining old oil gets carried away with it.
5. now close the drain and fill gear case with the new oil through the top filing hole.
6.close the cap and DONOT start the engine with out closing the filling cover

Posted on Jul 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i reset my oil light? my husband changed


TURN THE IGNITION KEY TO RUN WITH THE ENGINE OFF.FULLY PRESS AND RELEASE THE ACCELERATOR PEDAL THREE TIMES WITH IN FIVE SECONDS.YOU HAVE TO DO THIS MORE THAN ONE TIME.ITS NOT GOING TO RESET FIRST TRY BUT DO THIS PROCEDURE.UNTIL THE CHANGE ENGINE OIL LIGHT WILL FLASH WHILE THE SYSTEM IS RESETTING.TURN THE KEY TO OFF.WAIT A FEW SECONDS.START CAR UP TO SEE IF CHANGE OIL LIGHT COME BACK ON.IF YES YOU HAVE TO TRY THE RESET PROCEDURE AGAIN.

Sep 26, 2009 | 2006 Chevrolet Equinox

2 Answers

Change oil light stays on


Using the black push button/rod, you know the one where you can switch to see trip A trip B etc?
keep pushing it til you get to the check engine part then it will cycle through several things. when you find the right place it will read "if new oil hold reset" at this point just hold reset. That is the black push button/rod.

If this don't work, try it again, sometimes it may miss...

Sep 08, 2009 | 2008 Ford Expedition

1 Answer

Reset oil change reminder procedure


Press the "step" button until the oil change interval comes up then press and hold "reset"

Apr 21, 2009 | 2003 Chrysler Town & Country

2 Answers

2006 ford exsplorer oil light did not go off after a oil change.


In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Mar 03, 2009 | 2006 Ford Explorer

1 Answer

Oil filter change where is it and how to replace


It doesn't have a proper oil filter, for this reason you have to change the oil regularly (every 1000 to 2000 miles).

For information on how to change the oil try this link:

http://hondacg125.awardspace.com/

The honda xr125 and honda cg125 have the same engine. I have changed the oil several times on my xr125 and I can confirm that you follow the same procedure for both bikes. There is also an oil change demo on youtube for the cg125:

http://www.youtube.com/watch?v=Cas49yea4n4

Dec 09, 2008 | 2003 Honda XR 125 L

1 Answer

Change oil light reset?


Hi Shady, here is the procedure for resetting the light.
Resetting Procedure
Follow this procedure to reset the GM Oil Life System™
  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.
  3. If the CHANGE OIL SOON light flashes, the system is resetting.
  4. Turn the key to OFF after the light has finished flashing, then start the vehicle.
  5. If the CHANGE OIL SOON light comes back on, the engine oil life system did not reset. Repeat the procedure.
With Trip Computer
  1. Press the MODE button until the light appears next to OIL LIFE.
  2. Press and hold the RESET button for three seconds. The oil life percentage should change to 100 percent.

Nov 02, 2008 | 2002 Pontiac Grand Prix

1 Answer

1999 Pontiac Grand Prix lights are staying on


what is the procedure you are using can you explain it to me?
Resetting Procedure

To reset the CHANGE OIL SOON indicator if equipped with the Driver Information Center (DIC).

  1. Turn the ignition to ON without starting the engine.
  2. Fully press and release the accelerator pedal three times within five seconds.
    • If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF then start the vehicle.
    • If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure.
To reset the OIL LIFE indicator if equipped with a Trip Computer.

  1. Press the trip MODE button until the light appears next to OIL LIFE.
  2. Press and hold the trip RESET button until the oil life percentage changes to 100%.
Hope this helps Ill look into the ABS lights but I do believe that you will need a scan tool to retreive a code to be able to diagnose the reason for the lights



Sep 18, 2008 | 1999 Pontiac Grand Prix

Not finding what you are looking for?
2004 KTM EXC 450 Racing Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...