Where is the throttle stop screw to adjust idle on an 1985 FJ1100? I have a pdf manual, but picture is not very clear as to where it is located.
SOURCE: Yamaha TTR 250, Idling Problem
you might have an air leak somewhere. chack to make sure you did not loose any o-rings from the diaphragm cap or the pilot screw. also check that there are no cracks on the intake boot. VERY LIGHT sprays of the either or carb cleaner can lead you to the source.
SOURCE: idle problem.
The timing is factory set and doesnt change, does it have the idle screw? I assume the one you adjusted is the air mixture screw at 1.5, you shouldnt adjust with the cable as it might cause the engine to rev on full lock, it needs a small amount of freeplay
174 views
Usually answered in minutes!
×