Question about 2001 Suzuki GSX 750 F (Katana)

1 Answer

Brand new battery and still cant get it started???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

Read the voltage at the starter terminal that goes back to the battery (connect the other meter lead to unpainted engine metal). It should read 12.6 volts even when you attempt start. If it reads less voltage, or the voltage drops to zero when start is attempted, look carefully at the positive battery connector and wire for white/green corrosion. Check the negative terminal wiring too, but corrosion is not as likely. If the battery itself does not read 12.6 volts, the new battery may require charging at low current for about 6 hours. Hope this helps!

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 97 honda accord lx. I replaced the battery brand new. I believe i have a white valet override button on my dash i hit on accident. Now when i go to turn my key to start the car all lights and...


Your connections are not good at the battery. Are the cable ends that attach to the battery clean? Are they making good contact with the battery. With the cables connected and after you try to start measure voltage by placing the test leads directly on the battery post. You should see 12.4 volts. Now place the leads directly on to the battery cable ends. You should see exactly the same voltage. If not it's the connection that are not good.

Nov 04, 2014 | 1997 Honda Accord

1 Answer

Car wont start and i have a new battery


have the battery load tested as brand new batteries can be faulty. Check that the terminals on the battery are shiny clean and tight. Check battery leads are in good condition and not corroded away and check the earth wire is fixed and in good condition.

Feb 01, 2014 | Cars & Trucks

1 Answer

I cant charge the battery through computer


The C183 isn't a battery charger. If you use rechargeable AA batteries in it, you must charge the batteries outside the camera using a separate battery charger.

Aug 01, 2012 | Kodak C183 Digital Camera

1 Answer

I put a new stairring cloum in my car and now the anti theft security light is on and i cant get the car started after a new stairring cloum...


the key has a small sensor that recognizes the car so the key must match the security system... when changing the steering column with new key you must change security box from passenger side kick panel..

Jul 08, 2012 | 1992 Buick LeSabre

1 Answer

It will not start by the ignition but starts after few kickstart


When you kick start a motorcycle or scooter, the motor turns over much faster than your electric starter can turn it over, even with a new battery.
I saw this before with several brands of scooters and the problem was solved by making sure you have clean battery terminals, and a fully charged good battery.
Some batteries will take a full charge but cant take a load. So your battery may seem good because it has 12+ volts, but when you try to start it it drops below 10-11 volts.
Most local auto parts stores can put a load test on your battery for free. If you purchase a new one, make sure it is the one called for for your scooter.

Nov 29, 2010 | Kymco People S 200 Motorcycles

1 Answer

1994 NISSAN PATHFINDER WONT START I LIKE TO FIND OUT HOW CANT I BY PASS THE MANUFACTURE SECURIETY SYSTEM . BUT I HAVE INSTALLED A AFTER MARKET ALARM AND I HAVE A BRAND NEW STARTER, ALTERNATOR , BATTERY...


First thing you should have done was check and test.NOT REPLACE PARTS.Did you test the battery to determine it needed to go? Had the starter failed to turn the engine over? The Alt supplies current to run the vehicle ,and keep the battery at the proper state of charge. How did you decide on ign wires verus the other ign components? Did it start and run okey ,before you added the after market alarm? If yes, I guess you know where some of the issues are!

Feb 18, 2010 | 1994 Nissan Pathfinder

1 Answer

2001 grand Vitara Security system


so you are saying you would replace the alarm system just because you cant find a battery?? thats foolish search online for the battery...there are many interchange numbers so it doesnt have to be a certain brand.

May 12, 2017 | 2001 Suzuki Grand Vitara

Not finding what you are looking for?
2001 Suzuki GSX 750 F (Katana) Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...