Question about 2007 Triumph Daytona 675
There's a drain on the lower left. Just in front of the shifter.
According to the manual, the cooling system capacity is 2.5 liters (0.66 gal).
The manual instructions say to (1) remove the Drain Plug from the crankcase, (2) slacken the bleed screw on the water pump to help drainage, (3) remove the bottom hose from the water pump and allow the remaining coolant to drain, (4) close the bleed screw, and (5) fit the coolant drain plug to 13 Nm.
To refill (1) fit the bottom hose to the water pump and tighten the hose clip, (2) slowly add coolant through the top radiator filler until the system is full, (3) open the bleed screw on the water pump and allow any air to escape then close it, (4) start the engine and allow to idle for a short time, (5) stop the engine and top up the coolant, (6) fit the coolant pressure cap, and (7) check the expansion tank and top up if required.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.
Posted on Jun 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 21, 2017 | Triumph Daytona 675 Motorcycles
Feb 14, 2017 | 2002 Triumph Daytona 955i
Dec 10, 2014 | 2009 Triumph Daytona 675
Jun 20, 2017 | Triumph Daytona 675 Motorcycles
Aug 04, 2011 | 2007 Triumph Daytona 675
Apr 05, 2017 | 2007 Triumph Daytona 675
Jan 06, 2010 | 2007 Triumph Daytona 675
Nov 07, 2009 | 2007 Triumph Daytona 675
Nov 22, 2008 | 2007 Triumph Daytona 675
Nov 10, 2008 | 2007 Triumph Daytona 675
928 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: