Question about 2008 Yamaha Royal Star Venture

1 Answer

How do you remove the headlight bulb

Im changing the headlight bulb ,any suggestions how to make it easier
thanks
Randy

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 73 Answers

1. Remove headlight unit
2. Disconnect headlight leads
3. Remove bulb cover
4. Remove headlight bulb holder
5. Remove headlight bulb
6. Install new headlight bulb - DO NOT TOUCH THE GLASS PART OF THE BULB!
7. Install headlight bulb holder
8. Install bulb cover
9. Connect headlight leads
10. Install headlight unit

I'm not aware of any shortcuts, nor do I believe that any steps could be changed or eliminated without re-engineering the headlight unit.

Posted on Jul 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change the front driver side light bulb in a 03 Suzuki Grand Vitara 1.6?


Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb


Jul 03, 2016 | 2003 Suzuki Grand Vitara

1 Answer

How can I remove my 2004 toyota avensis headlight


Warning: If you have Xenon bulbs, take the car to service for this. They are dangerous to change because of the high voltage.

With small hands it is easier. If your hands seem too big for this, ask someone with smaller hands. Also depending on what side you need to change removing the battery may help or beding the wiper fluid refill pipe a bit.

Here are also good tips:
http://www.toyotaownersclub.com/forums/topic/108498-changing-an-avensis-headlamp-bulb/
http://www.toyotaownersclub.com/forums/topic/136290-avensis-headlight-bulb-replacement/

Mar 11, 2014 | Cars & Trucks

1 Answer

How to change headlight bulb r reg fiesta


I find it much easier to remove the headlight to change all the front bulbs on my Fiesta Zetec 1.25 :)

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

Im in the process of changing the high/low beam bulbs on my 07 GMC Sierra SLE(New Body Style) and have run into a bit of a problem...allready have changed the Drivers side but the passenger side i was able...


it possibly would be easier to remove the airbox out the way if you remove the headlight it may possibly put it all out of allignment and then you would have to get it re aligned by the garage, so its proberbly better to remove the airbox, it normally is quite easy to replace bulbs but can be awkward hope this helps

Feb 12, 2010 | 2007 GMC Sierra 1500

1 Answer

How do you change the front headlight on a 2002 Hyundai Elantra? Do you remove the front lens and is there a trick? Or do you have to go through the inside? My is on the same side as the battery which...


On the elantras i have found it is easier to unbolt the headlight (2 bolts) .Once unbolted There will be either a rubber cap that you pull off or a big plastic round cap that has fins on it that you unscrew( backside of the headlight). The plug that goes on the bulb is rectangle shaped, and on the short sides of the rectangle are tabs that you squeeze to pull it off the bulb. Then there is a retaining wire that holds the bulb to the headlight, it has a loop that you push on and slide over a little then swing it out to release the bulb. It can be a nuisance, but once you do it the first time the second time will be a lot easier.

Jan 22, 2010 | 2000 Hyundai Elantra

1 Answer

I can't get to the high beam bulbs on our 2005 Odyssey. How do I remove the headlight for easier access to the bulbs?


The procedure doesn't call for removing the headlight assembly. It is as follows:
The high beam headlight bulb and the low beam headlight bulb are replaced the same way.

Open the hood. To change the high beam headlight bulb on the passenger’s side, remove the power steering fluid reservoir from its holder by pulling it straight up.

Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.

Remove the bulb by turning it one quarter turn counterclockwise.

Insert the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place.

Push the electrical connector back onto the bulb. Make sure it is on all the way.

Turn on the headlights to test the new bulb.

If you replaced the high beam headlight bulb on the passenger’s side, reinstall the power steering fluid reservoir.

Hope this helps, but if you are having some specific problem leave a more detailed comment and I will try to help you.

Dec 26, 2009 | 2005 Honda Odyssey

2 Answers

Headlight bulb replacemnent


you don't you unscrew the lamp holder and pull the bulb out and pry the bulb from the bulb holder asembly.

Jul 22, 2009 | 2003 Kia Sedona

1 Answer

2003 Mercury Sable headlight bulb replacement


This problem is now resolved, thanks to a prior post by sableowner.

http://www.fixya.com/cars/t1479995-2001_merc_sable_headlight_replacement

The 2003 Sable has the same headlight assembly and removal/replacement instructions as the 2001 Sable. Once I had this information in hand, bulb replacement was easy.

Jan 10, 2009 | 2003 Mercury Sable

4 Answers

Hi ford focus 2006 in ireland, want to change headlight bulb, but how do i get to it?


The owners manual does tell you - but it is not obvious.
Unscrew the headlight unit - 1 screw
Push down the 2 retaining clips at the back of the unit to release them (long screwdriver needed
Remove the headlight unit so you can work on it - it will come out - try getting the end in the middle of the car out first rather than the wing side
The rest is easy as you have space to work.

It is easier to put the unit back than take it out apart from the clip on the wing side !

Enjoy

Dec 13, 2008 | 2006 Ford Focus

Not finding what you are looking for?
2008 Yamaha Royal Star Venture Logo

6,357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...