Question about 2005 Honda CBR 1000 RR Fireblade

1 Answer

While riding bike looses power and the hesd trouble light comes on what is the cause

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Hello there:
you may want to try turning the pit **** on reserve and see if it clears up then you may have a bad pit **** or a plug in the fuel filter and if problem not solved you may want to go have the valve clearance checked adjusting pads maybe flattened out and not letting the valve move properly...hope this helps please leave a review thanks...sincerely D.Jones

Posted on Jun 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Gxsr 1000 cutting back on power

check your chain is too loose and may need to be replace

Apr 19, 2014 | 2001 Suzuki GSX-R 1000

1 Answer

Flhx harley davidson

I would assume you treat it like a car & check for codes
& diagnose the same,using the proper trouble charts.

Jul 11, 2013 | Motorcycles

1 Answer

My bike looses power in high gears

I don,t think the chain could cause this , try lubing the chain with oil and taking it for a ride see if that makes a difference , when was your fuel filter last changed or your air filter cleaned or changed.

Apr 12, 2013 | 1995 Suzuki GSX 600 F (Katana)

2 Answers

Why does bike stall while riding in hot weather or in cooler weather after riding for an hour or so?

Hi, Christina and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a "LOAD" test if necessary.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Fuel tank empty.
10. Fuel tank contaminated with ethanol sludge.
11. Water or dirt in the fuel system, or clogged filter.
12. Restricted, blocked or kinked fuel line.
13. Faulty fuel pump.
14. Faulty pressure regulator.
15. Faulty or clogged fuel injectors.
For more information about your issue and valuable "FREE" downloads that you need please click on the blue links below. Good luck and have a wonderful day.
04 GSXR 1000 Engine electrical problem randomly dies while riding
Suzuki 2001 GSX R1000 Service Manual
OEM parts for Suzuki
Suzuki GSX R1000 Owner Manual

Mar 16, 2017 | 2003 Suzuki GSX-R 1000

1 Answer

The screws on my shimano cleats keep coming loose, causing major problems during rides. How do I fix this.

Go to your local auto parts store and buy a tube of locktite (for threads). Apply it on the threads of the screws and then tighten them down again (follow the instructions on the tube). There are set up time instructions on the tube - if you follow them correctly - you won't have any more trouble with them coming loose.

Jul 13, 2011 | Shimano SPD Mountain/Spinning Bike Cleat...

1 Answer

My HESD warning light came on on my 2007 honda cbr600rr, what does that mean?

HESD stands for Honda Electronic Steering Damper. The indicator light is telling you there may be a problem with the system. The procedure for testing the system is as follows (perform without the engine running):

Raise and support the front of the bike. Move the steering back and forth several times and make a mental note of the feel, this is at minimum damping.
1. Lower the side stand
2. Shift transmission into a gear other than neutral.
3. Open the throttle fully.
4. Turn the ignition switch on while maintaining steps 1-3.
The HESD icon on the LCD display should start blinking ( If not, start over ).
For the next 10 seconds, the ECM will set the HESD to maximum damping ( full-stiff ). Compare this to minimum damping. If there is no change, replace the HESD unit.

NOTE: This test will not work if the Malfunction Indicator Lamp has indicated a problem exists in the PGM-DSFI ( MIL is flashing ).

Nov 06, 2009 | 2008 Honda CBR 600 RR

1 Answer

Engine Light Going On/Off

yes it could cause this
fully charge battery and try again

Apr 04, 2009 | 2002 Harley Davidson FXD Dyna Super Glide

1 Answer

Emission control system light on dash

go to any Kragen or Autozone and ask for a free trouble code test of your electronic engine controls, there are over 100 different faults that cause this light to come on, some are as simple as a loose gas cap.

Feb 21, 2009 | 2007 Audi A6 Avant Wagon

Not finding what you are looking for?
2005 Honda CBR 1000 RR Fireblade Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4818 Answers


Level 3 Expert

78919 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides