Question about 1996 kawasaki VN 1500 Vulcan Classic

Open Question

How do i change belt for 2007 kawasaki ultra 250 supercharger

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 71 Answers

SOURCE: I changed the oil and filter in my 2007 kawasaki

you probably have a leak! It is possible, (depending on what type of oil you put in)
that the oil dissolved the gasket, or removed sludge from an existing hole, causing it to open. but if you dont have any oil spots..well....thats a whole nother story.
terribly sorry!!
i hope this helps in some way!

Posted on Jun 09, 2009

ollie reece
  • 1167 Answers

SOURCE: how do you winterize a 2007 kawasaki ultra 250x

what do you mean by this buddy????

Posted on Oct 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my '07 Kawasaki Bayou 250 sputter badly at near and full throttle?


clean carburettor there is a clot in it or on fuel line and petrol reserve on off valve.change fuel filter and try it.

Apr 21, 2015 | kawasaki 2007 Bayou 250

1 Answer

Tickind noise on 2007 range rover supercharged


where to begin , can you narrow down the area it seems to be coming from , first try spraying WD 40 on the drive belts one at a time if it stops change the belt, could be the tappets lots of options really , have to narrow down the area

May 19, 2014 | 2007 Land Rover Range Rover Supercharged

1 Answer

Jet ski troubleshooting


kawasaki ultra 260's are only cooled by lake or sea water so if the water supply gets blocked then it will overheat ! did it definatly overheat or just loose power because the superchargers do sieze up due to damp air or the pully bearing , also the dipsticks on them sometimes shear off and lock the cogs ! does the engine still run up on a hose pipe ? also has the ski been left a long time not used without fogging the valves in the head ? this is my job so get back to me ( 30 yrs ) ..

Dec 28, 2013 | kawasaki 2010 Jet Ski Ultra 260X

1 Answer

Bike trying to start on starter but won't run faster then starter will go every now and then it'll backfire


I have had several different types of vehicles with what your describing and on most changing the coil did the trick

Sep 20, 2012 | 2007 kawasaki KLX 250

1 Answer

How to change oil in supercharger on 94 buick park ave ultra


It is not necessary to change the oil in the supercharger. The only maintenance required is to CHECK the oil level every 30.000 miles. GM says that it is normal for some of the oil to get lost during normal use by seepage therough the front seal area. It requires 5W-30 synthetic oil.

I guess if you really want to CHANGE the oil, it would require removal of the supercharger and remove the oil fill plug and turn the supercharger upside-down to make the oil drain out.


12_23_2011_7_58_08_am.gif

Dec 23, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

Kawasaki klx 250. hard to get into nuetral and gears seem cluncky. Any idea of problem?


try first by changing the oil if this does not work adjust the clutch .
if you have no luck with that you may have to get your clutch plates looked at .

Jul 16, 2010 | 2007 kawasaki KLX 250

1 Answer

How do I change the main serpentine belt on a supercharged 99 park avenue ultra?


On your idler pulley there is a 15mil bolt... put a wrench on this bolt (long wrench) and turn it like you are turning it tighter. The idler pulley will move forward releasing tension on your belt. Make sure you pull the belt off the alternator pulley when the idler pulley is compressed. You may want to pay attention to how the belt is on there, maybe 2 people would be a good idea too if you aren't familiar with your car.

Feb 22, 2010 | 1999 Buick Park Avenue

1 Answer

1999 buick park avenue ultra motor mount and supercharger belt replacement


  1. Remove the engine mount to engine mount bracket nuts. Important: Ensure that the wood block extends past the width of the oil pan in order to avoid damage.
  2. Use a jack with a block of wood on the jack under the oil pan in order to support the engine.
  3. Remove the engine mount bracket front upper and lower nuts.
  4. Remove the engine mount bracket front upper and lower studs and spacer.
  5. Lower the engine as necessary and rotate the tensioner to remove the drive belt.Remove the supercharger belt.
  6. Reverse For INSTALATION

Dec 09, 2009 | 1999 Buick Park Avenue

1 Answer

I changed the oil and filter in my 2007 kawasaki


you probably have a leak! It is possible, (depending on what type of oil you put in)
that the oil dissolved the gasket, or removed sludge from an existing hole, causing it to open. but if you dont have any oil spots..well....thats a whole nother story.
terribly sorry!!
i hope this helps in some way!

Jun 09, 2009 | 2007 kawasaki 250 TR

Not finding what you are looking for?
1996 kawasaki VN 1500 Vulcan Classic Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...