Question about 2005 Harley Davidson FXD - FXDI Dyna Super Glide

1 Answer

What size are the axels? Are they 3/4 or 1"? - 2005 Harley Davidson FXD - FXDI Dyna Super Glide

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Harley changed to 1" axles but exactly when in which model bike, I don't know. The best thing to do is measure the ones you have. Harley has always been notorious for "using up their old stuff" before making a change over. Therefore, you could have a bike built in the first month of the year with 3/4" axles and the rest of the year model bikes have 1" axles. We call these bike "transition year models". Sometimes it the other way around. An earlier year model built in Nov, or Dec. having parts that weren't "introduced" until the next year model bikes. Just take the nut off the axle, loosen the clamp bolts on the fork and bump the axle out enough to measure it. Then tap it back in and retighten everything. That way, you'll know for sure.

Good Luck
Steve

Posted on Jun 02, 2010

Testimonial: "My bike must fall into the "transition" bike. I was going to swap some wheels with a buddy, and the axles apeared to be differant. Eitherway, thanks for your help. Shaun"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DIY cv axle 2008 chevy aveo


Jack the vehicle up at proper jack points and lower onto jack stand or stands.remove drivers side wheel. Use needle node pliers and a screwdriver to remove the cotter pin in the axel nut and determine the size of the axel nut. It will most likely be metric 28mm to 36mm. Use an impact to remove the axel nut. Now you will need to remove one or both of the ball joints. Start with the bottom one first and hold the axel in place and pull out on the hub. After you have the hub off of the axel note the splines and how the line up. Now turn the hub so that it is out of the way. You may be able to just yank the axel out of the transmission. If it didn't come out easily you will need a crow bar to gently pry the axel out of the case. Be careful not to put too much pressure on the transmission case. It's aluminum and it will crack and break if you beat on it. Just pry gently and with the transmission in neutral ( be sure to chalk the rear wheels so the car won't run you over) slowly rotate the axel and pry until it comes out. If that doesn't work you will need to rent a slide hammer. Thread it to the free end of the axel and forcefully slide the weight out to knock the axel about of the trans. Installation is reverse. DO NOT USE A HAMMER to force the axel back in you will mushroom the threads and never get the nut on.

Dec 06, 2013 | Chevrolet Cars & Trucks

1 Answer

Size of nut on 2002 front wheel axel


need to now the vehicle 1st 2002 what?

Jun 09, 2012 | Cars & Trucks

1 Answer

I have 2001 Chev Tracker, Oil started to run out of the Right side break drum. Removed Drum and foud oil all over the breaks. Tried to remove the Axel by removing the four nuts off of the backing plate,...


fror fixing the brakesw take the other rear wheel off and duplicate what u see. to get the axel out u must first remove diff cover in center of rearend then u will see a clip for each side axel remove clip and axel will slide out. good luck fron 1 to 5 being difficult its a 3

Jul 21, 2010 | 2002 Chevrolet Tracker

2 Answers

How do i remove the drive axle on a 2001 gran prix


*1. Remove Wheel, *2. Remove CENTER OUTER AXEL NUT Size is " 36 or 34 mm #3 Tie Rod End Remove #4 LOWER BALL JOINT Nut and Seperate it, Using a BENT TIPED PRY BAR Pop Axel < This Step Sometimes Requires Some Finess and Manipulation but It WILL COME OUT, SOME Have A Carrier type Bearing with them if so Remove it also.

May 12, 2010 | 2001 Pontiac Grand Prix

1 Answer

I need toremove the grooved pin running thru an axel


You need a roll-pin punch. That grooved pin is a roll-pin. It's made of spring-steel and they come in standard sizes. Sears sells them in sets with chisels, or individually.

Mar 31, 2010 | Heavy Machinery

1 Answer

How do i get the ignition switch off my 1997 vw golf i took off the safety boly steering wheel and all plug conectors just left with shaft and spring


This is a how-to from VWVortex.com

You WILL need the following,
10MM wrench
13MM wrench and socket or another wrench.
a eyeglasses phillips head screwdriver. (very small)
a regular size phillips head screwdriver
new ignition switch
vice grips (may not need them)
Instructions.
1. lock the steering wheel, and make note where it was just incase.
2. disconnect the battery with 10mm wrench.
3. remove the plastic around/behind the steering wheel by the two screws underneath using a phillips head screw driver.
4. now go under the dash, and remove the plastic peices covering up the steering wheel axel. and unscrew the bolt using a 13MM wrench&socket. Its a "U" joint.
5. Unplug everything behind the wheel including the ignition and the airbag.
6. using a vice grip, or your fingers if it is loose, to unscrew a gold bolt on the left side of the steering wheel column, its right behind the steering wheel on left underside.
7. Gently pull out the steering wheel, and the whole thing, including the axel, and steering wheel will comeout, be careful the end of it is greasy.
8. now with a small screwdriver (phillips), eyeglasses size is what i used, remove the screw where the ignition switch is, its a pretty long screw so it may take some time and it the switch wont come out until its fully unscrewed.
9. replace everything opposite of how it was took out.
Note- when your putting the steering wheel axel back, be sure to put back the large spring and align the axel correctly.



Oct 23, 2009 | 1997 Volkswagen Golf

1 Answer

What is the bolt size on the bearing assembly of an 06 saturn Ion?


If you are refering to the axel shaft retaining bolt, it runs between 1 3/16ths- 1 5/16ths. Metric is 27mm-29mm. Bring a few sockets to be certain.

Oct 06, 2009 | 2003 Saturn ION

1 Answer

What size is the hex nut on a front axle 2004 honda shadow aero?


Hi, Kevinsprinkl for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Axle bolt sizes
front Axel hex size
Honda shadow vt1100 Owners Workshop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT1100C2 Owner Manual Page 3

Jul 13, 2009 | 2004 Honda VT 1100 C2 Shadow Sabre

Not finding what you are looking for?
2005 Harley Davidson FXD - FXDI Dyna Super Glide Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...