Question about 2003 kawasaki KLR 650

1 Answer

IGNTION SAFETY LIGHT KEEPS SHORTING OUT

IGNTION NUETRAL SAFETY LIGHT KEEPS SHORTING OUT FOR A SHORT WHILE AND THEN COMES BACK ON IT DOES NOT EFFECT ANYTHING WHEN I RIDE MY BIKE IT ONLY DOES IT WHEN I STOP SOMEWHERE AND THAN TURN THE BIKE OFF AND THAN I COME BACK AND TRY TO START THE BIKE ,EVEN IF I HOLD IN THE CLUTCH IT WILL NOT START I HAVE TO PUSH START IT TO GET IT GOING AND WHAT IS WEIRD AFTER I PUSH START IT THE LIGHT WILL COME BACK ON.IF ANYBODY HAS ANY I DEA WHAT THE PROBLEM IS PLEASE E-MAIL ME.THANKS

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 338 Answers

Your problem is ether the switch itself or the single wire connector is loose in the switch located left side of the engine under the chain cover.

Posted on Jun 02, 2010

  • bazzz7071
    bazzz7071 Jun 02, 2010

    the switch is an easy deal to replace remove the chain cover and you will see it it is a simple screw out screw in.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My neutral light on my 1986 Kawasaki z250C stays on all the time. What can the problem be and how do I fix it?


Probably the nuetral safety switch or the wiring harness has a short. Replace switch and check the harness for damage.

Aug 23, 2016 | kawasaki Motorcycles

1 Answer

St191 30 amp am2 circuit keeps blowing


I suspect you have a short somewhere between the ignition switch and the instrument panel fuse block. Here is what you can do. Unplug the igntion switch connector. Remove the ST fuse and the IGN fuse. Connect a test light to the POSITIVE side of the battery, Probe pin 3, black with white wire and pin 4, red wire at the ignition switch connector. If the test light illuminates that wire is shorted to ground somewhere between the switch and the fuse block.

Nov 06, 2015 | 2000 Toyota Corona

1 Answer

Nuetral light died


More than likely there is a short in the wires around the neck by the ignition. Check the connector and wires around the ignition for shorts, frays, or for being open/cut.

Nov 19, 2013 | 2007 Bajaj Pulsar 180 DTSi

1 Answer

My Stability System light came on and my truck wont start, How can I fix it?


Igntion 1 is For the ECM and the injectors, when the fuse open there will be no power to injectors, or the ECM,and of course the Stability light will come on,it means no power to that system,you have a short either with thhe injector or wiring,

Dec 03, 2012 | 2005 GMC Yukon XL

1 Answer

Liftmaster Chamberlain Garage Door Opener Transmitter 300MC: Light keeps on flashing on the motor...


how many flashes
1-safety sensor wire broken
2-safety senor wire shorted or reversed
3-door control or wire short
4-safety sensors mis aligned
5-motor overheated or bad RPM sensor
6-circut failure, bad logic board

May 17, 2010 | liftmaster Chamberlain Garage Door Opener...

3 Answers

My 1997 dodge caravan won't start. has no power to starter wire or to engine. battery ok stater ok switch ok fuses and relays ok


there is an interrupt switch, called neutral safety switch. When it fails or goes out of adjustment, no start, and essentially no protest or indication. Try foot on brake, shift to neutral, turn key to start and slowly move shifter out of nuetral in each direction. If starter actuates, look into switch adjustment.

Sep 06, 2009 | 1998 Dodge Caravan

1 Answer

Won't start after pulling safety tether Polaris Predator 90 2006


as long as the tether is back in correctly it should start. try checking the battery. if the battery is fine then look at the battry and make sure your tether wires arent shorted anywhere

Apr 02, 2009 | Polaris ATV

1 Answer

Have No ignition light when in Nuetral.plus wont start


russel just because you have new batt does not it is not faulty or not fully charged have it tested should read 12.7 volts if fully charged. it should not be a fuse or green light would not be on when the bic is running . check batt cables at battery and also at stater solenoid. hope this will help

Mar 24, 2009 | 2003 Yamaha YZ 250

Not finding what you are looking for?
2003 kawasaki KLR 650 Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...