Question about 1999 kawasaki ZZR 600

2 Answers

When riding an annoying rattle is coming from

When riding an annoying rattle is coming from front pads on my recently purchased kawasaki zzr600-e 1999, any ideas how to shut it up? brakes seem to work well

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 338 Answers

Hello on each break caliper there is a spring that suppose is there to keep your pads from do that also when new pads are replaced brake quiet is put on the back of the brake pads to keep brake noise to a minimum.
The brake springs may be week due to heat from the brakes so there is less tension causing the pads to rattle.

Posted on May 31, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Go to your local autoparts store. There is a blue aeresol you can spray on the back of the pads. This should DEFINITELY help, if not solve the problem altogether.

Posted on May 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How should the pipes from the carbs be connected to the fuel tank? Also which pipe connects the the smaller outlet on the airbox? 1991 zzr600 d2 . Thanks


Hi, Guy for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
1991 kawasaki ZZR 600 fuel line diagram Google Search
Hep with Ninja fuel line routing
Kawasaki ZZR600 1990 2005 Service Repair Manual Download Download Manuals... $10 cheap
Kawasaki VN 750 Service Manual Free
OEM Parts for Kawasaki
2004 Kawasaki ZZR600 Owner Manual

Jun 03, 2017 | 1991 kawasaki ZZR 600

1 Answer

Fuse box kawasaki junction zzr600


bad earth connection on engine to frame

Nov 11, 2013 | 2008 Zongshen Storm V250

1 Answer

I have a 2000 chevy malibu. I recently replaced the front brake pads. After this when driving down the road when i hit bumps something in the frontend rattles, i can hear and feel it.. when i hit or ride...


A loose pad could do it.
Check the pad anti-rattle clips again. The pads should be snug in the calipers. Its possible the new pads are not the exact same shape as the old ones.

Jan 14, 2013 | Cars & Trucks

1 Answer

Zzr600 91 front brakes. When front lever is touched the slightest bit, i will be riding and the font brakes lock up


Hi, this means that the pistons of your front brake are not recovering properly.
If you feel confortabe with that job, you must remove brake caliper , then remove cilinders and all the protection rubber and sealing rings. Give the cilinders a good cleaning (check for scrathes or rust) replace sealers and reasemble all. Change the brake fluid and purge the circuit properly
good luck

Sep 14, 2011 | 1991 kawasaki ZZR 600

2 Answers

I replaced the front brake pads on my 1999 fatboy i tightened both caliper bolts but when i ride i can hear a slight rattling sound coming from the caliper. please help. ...


Did the original pads have anti rattle springs attached to them? If they did, you should have transferred them onto the new pads. The rattling isn't dangerous by any means, but it can be annoying.

Jun 28, 2011 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

How to take pin holding rear brake pads on kx 250 2001


There should be a allen key plug to take out of the caliper then once this is out there will be another allen key head behind the plug to undo (this is the pin) just undo, take out and the pads should be able to be removed.
Pay close attention to the direction pads come out and any spacers between the pads and brake piston as you want them all back in exactly the same with the new pads they stop the pads from rattling around when riding
good luck regards Jamie

May 27, 2011 | 2003 kawasaki KX 250

1 Answer

Kawasaki ZZR 600 clutch noise


Hi, Tompolv6 I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Chains---RATTLE
5. Clutches---CHATTER
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fronk Forks---Plunk
9. Gears---WHINE
10. Head Gasket---HISS
11. Hydraulic Lifters---TAP
12. Pistons---SLAP
13. Rear Shocks---SQUEAK
14. Shifting Trans---CLUNK
15. Solid Lifters---TICK
16. Starters---CLICK
17. Connecting Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
03 zzr600 Loud clunking noise at idle
zzr600 clutch noise
Kawasaki ZZR 600 Complete Service Repair Manual Download Manuals Technical $10
OEM Parts for Kawasaki
2006 Kawasaki ZZR600 Owner Manual

May 25, 2017 | kawasaki ZZR 600 Motorcycles

1 Answer

After riding my motorcycle for a bit i turn it of


check charge rate and also check if brake light staying on

Jul 20, 2010 | 1992 kawasaki ZZR 600

1 Answer

Can i get an eletrical wiring diagram for a KAWASAKI ZZR600


Hi and welcome to FixYa,

On your need for the wiring diagram of a Kawasaki ZZR600, please click here.

Good luck and thank you for asking FixYa.

Dec 05, 2009 | 1994 kawasaki ZZR 600

Not finding what you are looking for?
1999 kawasaki ZZR 600 Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...