Question about 2001 Triumph Triumph Bonneville

1 Answer

What are the top end torque settings for a 1975 750 triumph bonne

What are the top end torque settings for a 1975 750 triumph motorcycle

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

The Base nuts are in the 26-28 ft/lb range and the head bolts are 18-20 ft/lbs. I see the T150 goes from 20-22 lbs. There is a sequence too. I usually snug everything up and work from the center bolt to the four bolts closest to the center bolt and then the 4 outside bolts. Triumphs are pretty forgiving, just don't over torque.. and remember to check the torque or re-torque once you have started the bike. Say, ride it a block or two and then re-torque. I like to put a load on the engine before re-torquing.

I have just snugged everything down by feel in the past with good results but then again you have to know what 22 ft/lbs "feels" like.. good luck..


Posted on Jun 02, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine mounting bolt torque setting

Hi, Darren for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Triumph, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
675 Torque Specs and General Specs
Motor mount bolts
Triumph DAYTONA 675 Service Manual
Triumph Daytona 675 Owner Handbook Manual
OEM parts for Triumph

Jul 01, 2016 | 2010 Triumph Street Triple

1 Answer

Where can I find cam specs for Triumph triple, 1998-2004 for example. I want to tune it down a tad. mvh SA

Hi,when I used to drive bikes I found the easyest way to sort out the torque was to change the sprockets this can make a big difference in exselleration and top end,and this is a lot less cost,seek some help on this before you start changing cams.
Hope this was some help.

Dec 23, 2014 | Triumph Motorcycles

1 Answer

Caliper torque settings

See if this reference PDF helps.


Hope this Helps!!!!


Aug 23, 2014 | Triumph Bonneville Motorcycles

1 Answer

How do i remove the ignition from my 93 triumph trident sprint 900 i cant remove it from the top clamp

ignition barrells are generaly bolt rivetted to the underside of the top yolk (the head of the bolt snapps off when torqued). To remove the barrell the heads of the two rivets need to be drilled out.

Feb 13, 2010 | 1993 Triumph Trident 900

1 Answer

Do you know the torque settings for the triumph tiger 955 motor bike front wheel discs

For something like this try calling a dealer and just asking what the torque value is. Not all the time but normally a dealership will help. Be sure to have a conversation with them though. Simply calling and only asking what you need comes off as short, having worked at a dealership before I've seen it many times. Take the time to explain what you have gotten into on your bike but be brief.

Oct 10, 2009 | 2004 Triumph Tiger

1 Answer

What is the torque setting for rear wheel nut on a

146Nm on the 46mm Nut 
146Nm ~ = 108 ft-lb

Aug 11, 2009 | 2005 Triumph Speed triple

1 Answer

I need sprocket torque settings for cbf 600?

do all nuts up while holding the rear brake on, and use a grade of loctite that can be undone without to much fuss like 'super nut lock' , no need for torque settings things are done up firmly with a locking compound! cheers.

Jul 29, 2009 | 2007 Triumph Tiger

1 Answer

Torque setting

The sprocket nut torque setting is 132Nm. If you are after the plastic cover torque settings, i dont think they have one. Hope this helps.

Mar 28, 2009 | 2007 Triumph Tiger

1 Answer

955i engine torque settings?

tightening torques-cyl head-stage 1 -14 ft. lbs.,stage 2-19 ft. lbs.,stage 3-90 degree final turn. cam cover-4 ft. lbs., camshaft sprocket-11ft. lbs.,clutch hub-stage 1-38 ft. lbs.,stage 2-76 ft. lbs.

Feb 11, 2009 | 2000 Triumph Daytona 955i

Not finding what you are looking for?
2001 Triumph Triumph Bonneville Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides