Question about 2005 Benelli Velvet 125

1 Answer

Opening the seat

The seat is supposed to be opened by pushing the ignition key inwards at some point on the ignition. At which exact point would that be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Benelli Master
  • 41,895 Answers

Hi, Christine930 for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
How to Open Your Seat on Scooter or 3 Wheel Trike MegaMotorMadness com
unlock any scooty storage box without key
How to Open Your Scooter Seat MegaMotorMadness com
benelli velvet service manual pdf 1 Search Document com
http://www.benelli-scooters.de/pdf/BA_Benelli_Velvet125.pdf

Posted on Dec 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TOOPEN SEAT ON URBANO SCOOTERETTI ELECTRIC


To open the seat, insert the key into the ignition. Without pushing down on the key simply rotate the key counterclockwise and the seat latch will release.

Sep 28, 2014 | Health & Beauty

1 Answer

Seat lock wont open


Without pushing the ignition key in when turning it left from off position, lift the back of the seat while turning the key left. I have found the seat release spring under the seat gets weak, so you have to lift it manually. If you push the key in while turning it, it may bypass the seat release and lock the steering. Hope that helps.

May 05, 2014 | 2007 Derbi Atlantis Bullet 2t

1 Answer

Suzuki savage key wont turn past park


turn your handlebars slightly to take pressure off the steering lock and push the key inward as you turn it...

Jan 19, 2013 | 1995 Suzuki LS 650 Savage

1 Answer

Unlock seat yamahy vity 2009


This is the answer as per the owners manual. Place the scooter on the centre stand.Insert the key into the main switch, and then turn it anticlockwise to the first OPEN position. If the main switch is in the LOCK position, turn the key anticlockwise to the second OPEN position. Do not push inward when turning the key from OFF to OPEN or from LOCK to OPEN. Lift the seat up from the back end. As this system is electronic, obviously you have to have the battery connected and charged up, otherwise you cannot open it without specialised knowledge. Hope this helps.

Dec 07, 2011 | 2009 Yamaha Vity

1 Answer

Iv been given a bugaboo cameleon from interstate and it won't open ? and the seat is also attached now ..and I can't get it off .'it was made in 2005. Thank you .


Frame won't open with seat attached and the seat should not fit on a closed frame? The seat is the locking component for the frame. Someone has used brute force to get it like that and it'll take brute force to undo the damage. Get a can of silicon spray and lubricate the seat locks and turn stroller upside down to get some to run down inside the seat legs. Press both square seat release buttons inward (one side has a small safety lock you heed to side across before you push inward) and heave up! You cant do any more damage than what may have been done. Click here to see the correct way to set up your stroller.www.fixya.com/support/r9134331-assemble_frog_or_cameleon

Jul 26, 2011 | Bugaboo 'Cameleon' Stroller

1 Answer

Busted ignition


a push button start should turn off the same way.

Jul 30, 2010 | 1987 Volvo 740

1 Answer

For a yamaha neo's how would you open the seat


Seat--- To open the seat:--- 1. Place the scooter on the centerstand.-- 2. Insert the key into the main--- switch, and then turn it counterclockwise to “OPEN”.--- NOTE:
Do not push inward when turning the
key.
3. Fold the seat up.


-----------------------------------------------------------------
To close the seat
1. Fold the seat down, and then
push it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left
unattended.
NOTE:
Make sure that the seat is properly
secured before riding.-----------------

This will help. Thanks please keep updated.please please do rate the solution positively .thank you for using fixya


Mar 20, 2010 | 1972 Yamaha XS2

1 Answer

How to remove ignition barrel from 1997 toyota celica


Remove the plastic covers around the ignition switch, insert the key in the ignition and turn the key to ignition on position (just before start position) now locate the pin on the side of the ignition switch which is flush with the aluminium housing holding the barrel,the pin is about 3 mm in diameter.Gently press the pin inwards (which is spring loaded) with a sharp pointed object e.g small screwdriver and at the same time while holding the pin, pull on the ignition key as if you want to remove the key, and the barrel will slide out completely.

Regards
Phillip

Sep 17, 2009 | 1998 Toyota Celica

1 Answer

The remomte control is not working after the high temperatures of yesterday With the key we can open de the doors but despite of the new batery in the remote it is nog functioning


Ok here are the programming instructions for the remote, follow them exactly, no missed steps, if this doesn't correct the issue the remote is defective most likely.

  1. Remove key from ignition.
  2. Close all doors.
  3. Open driver side door and leave open.
  4. Perform the following steps within 24 seconds.
    a. Insert key in ignition.
    b. Turn key to ON and OFF.
    c. Repeat step b two more times.
    d. Remove key.
    e. Push driver door frame button three times (black rubber button located on driver door frame that tell the vehicle whether or not door is closed.)

5. Buzz sound, chime or doors will lock and unlock should be heard at this point signaling that the vehicle is now in
programming mode. If not, wait 40 seconds and return to step 4.


6. All transmitters need to be programmed at this time, including the old ones. Push any button on the transmitter
two times. A buzz sound, chime or doors locking and unlocking should be heard at this point signaling that the
vehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times
using the only transmitter. If there are two transmitters, repeat this step two more times using the second
transmitter.

7. Push driver door frame button one time. Two buzz sounds, chimes or doors locking and unlocking 2 times should
be heard at this point signaling successful programming.

Aug 07, 2009 | 2003 Mazda MPV

Not finding what you are looking for?
2005 Benelli Velvet 125 Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Benelli Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Frank Richardson

Level 1 Expert

21 Answers

Jim

Level 3 Expert

832 Answers

Are you a Benelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...