I need a vacuum diagram for a Yamaha 2000 r6
SOURCE: I'm installing a new rear tail light with turn
use a light pen that you can get from auto parts store to find the hot wires for l and r sides
SOURCE: Will 2000 Yamaha R1main switch (iginition) fit an R6?
if the wiring diagram where the same it will work.
SOURCE: 2000 yamaha r6 will turn over and will not start
check if there's a current coming out of your 4 spark plug if there's 2 busted it will not start.
SOURCE: 2000 yamaha r6
This sounds like it could be any of 3 things. Ignition system, Air system & fuel system. Most commonly you'll find that the carburettors just need to be cleaned as this problem sounds related.
I would suggest thoroughly cleaning the carburettors as a good starting point. Along the way though I would also check the battery, the fuel tap and filter, the air filter and air ducts. As any of these components are blocked, will cause a similiar symptom. You should find it run better afterwards, if not I can help moving on to check the next possible cause. If you need help of how to get to the carbs and how to clean them, let me know.
SOURCE: Find a rebuild kit for 2000 Yamaha YZF R6
your best bet it to order back threw the dealer, but they should offer some kits for the bike threw after-market company's like partsunlimited, lp "lockhart Phillips", and maybe tucker rocky street, at a better price but you may have to buy some parts extra it may not come in a complete kit like the factory offers.
2,037 views
Usually answered in minutes!
×