Question about 2000 BMW R 1100 S

1 Answer

Got an old spyball alarm (green rectangular key fob with a black stripe and two buttons). I believe its the 6527. Battery ran down and forgot itself... Using the recessed button and holding it down for about 30 seconds it remembered itself. However while it is now allowing me to to start the bike I believe I have turned off the alarm system and I suspect the immobiliser and assume there is a process involving button pressing in a set order to reset the alarm. Anyone know the routine? The second key fob does not appear to work at all, can they be repaired? Any help much appreciated! Ben

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to pussh the left button for one second and then again for 15 seconds (according to the manual, for me this is not working), maybe for you it will do the trick

Posted on Jul 17, 2010

  • marecki12
    marecki12 Apr 18, 2014

    you must press left (1) buton on the switched off ignition and hold , then switch on the ignition and keep holding until alarm turned on

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Re-synching key fob to alarm congroller


More than likely you will have to re-sync your keyfob to the car. Your owners manual may have the steps needed to do this. What year/make/model of vehicle is it?

Oct 22, 2013 | Computers & Internet

1 Answer

Re-setting synch between key fob and alarm controller on porsche boxter


change the battery in the keyunit.u need to stick a small flat screwdriver between the two parts to get it open.

Oct 22, 2013 | Computers & Internet

1 Answer

Yet another Ford Focus Key Fob problem...


You need the dealer on this.

Oct 24, 2012 | Cars & Trucks

1 Answer

Left lights on ,and ran down battery. When i try to jump start, alarm goes off,key fob wont work till battery charges tried putting key in ignition and turning key, tried locking and unlocking door. what...


Find the alarm and disconnect it, or locate the fuse to the alarm and remove it. Then you can charge the battery without all the noise. Once the battery is charged, hook the alarm up and disarm it with the remote.

Dec 28, 2010 | Kia Spectra5 Cars & Trucks

2 Answers

2003 Audi A4 Cabriolet alarm problem. The fobs (both) keep losing sync with the car. The fobs have new batteries. The hazard warning lamp switch on the dash is illuminated constantly, and I believe the...


unlock the car with the key and hold the key over for 30 secs,(the windows will go down) then lock the car/hold key over for 30 secs,(the windows will go up). wait 30 secs then press/hold down the unlock button on the key fob,this will resyncronise the alarm/key fobs.

Nov 23, 2010 | 2003 Audi A4 Cabriolet

1 Answer

Changed oil and cleaned battery cables.Started car up. Ran for 2 seconds security alarm went off car shut down.no power to fuel pump.Is there some way to reset the fuel pump


You need to reset the alarm system.That can be done with the remote entry key fob or by locking then unlocking the drivers door with the ignition key with all doors closed.This is for a factory alarm system.Also check the inertia switch,should be in the trunk,on the side with a push button top.Push button.If already down its not tripped.

Apr 17, 2010 | 2000 Mercury Cougar

1 Answer

Spyball alarm green buttons on fob cant get bike to start got alarm working now but no go in starting please help


Sounds like alarm has been set off,all the bells an whistles have stopped now it's in anti theft mode.Try disconnecting neg.wire on battery for a couple minutes and then reconnect.Alarm should go off.Take fob an shut alarm off like normal and that should do it.

Feb 09, 2010 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

Car will not lock or unlock using the green button on key fob


It sounds like the reciever on your car may have gone bad. My only suggestion is to take it to a specialist to check the key fobs reciever.

Jun 16, 2009 | HandHeld Entertainment Mobile Monitor Kit

Not finding what you are looking for?
2000 BMW R 1100 S Logo

726 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...