Question about 2001 kawasaki ZX-6R Ninja

1 Answer

Fan not working The fan on my ZX6r is not cutting in how do I bridge the wires to see if its the switch

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 860 Answers

Remove the wiring to the switch and bridge them with a split pin or similar, tur ignition on and see if fan runs, if fan runs sensor is faulty, if fan doesn't run check fuses if fuses ok suspect faulty fan motor

Posted on May 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you check a fan motor






You need to check the volts at the motor while it's running, to make sure some safety is not shutting it off. Then check the amps on the motor while it's running. Also you need to check your capacitor and wiring.

Apr 30, 2014 | Heating & Cooling

1 Answer

Heater fan runs for a few min then shuts down


Check the afc Automatic fan control is shut off too soon .

Apr 29, 2017 | Vulcan Heating & Cooling

2 Answers

Fan switch not working


Check for power at the fan motor.

Aug 29, 2012 | 2006 GMC Envoy

1 Answer

My VW polo radiator does not come on when the engine reaches normal engine temperature i check all the fuse in the holder thy all seem to be ok, There is all so no current going to radiator fan switch...


The thing that you are bridging is called a fan relay.
you need to replace that,in the meantime you can bypass the relay by attaching the wires together.
If you need to see if the fan is working without waiting for the engine to warm up, just flip on your air conditioner which will in turn start the fan cooling system right away.

Sep 21, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

The cooling fans to the radiator are not working.


This is usually the problem with a fan is the thermostatic switch. Bridge out the thermostatic switch on the radiator which operated the fan. If the fan works, replace the switch. If this does not work, check the wire connections and the relay. Also, with the ignition on, one of the wires on the switch should be live, you can check this with a test light brounded to the body work.

Jan 30, 2011 | 1989 Toyota Camry

1 Answer

Cooling fan will not run


CHECK FUSES /FUSIBLE LINKS IF THEY ARE GOOD RUN THE ENGINE UNTILL NORMAL OPERATING TEMPERTURE IS REACHED , THEN ALLOW IT TO IDLE . IF THE FAN DOES NOT CUT IN WITHIN A FEW MINUTES ,OR BEFORE THE TEMPERATURE GAUGE APPROACHES THE 110 MARK OR THE RED END OF THE SCALE ,SWITCH OFF THE IGNITION AND DISCONNECT THE WIRING PLUG FROM THE COOLING FAN SWITCH , BRIDGE THE RELEVANT TWO CONTACTS IN THE WIRING PLUG USING A LENGHT OF SPARE WIRE AND SWITCH ON THE IGNITION . IF THE FAN NOW OPERATES , THE SWITCH IS PROBABLY FAULTY AND SHUD BE RENEWED.

Oct 24, 2009 | 1991 Volkswagen GTI

2 Answers

Seriously overheating zx6r ninja


With the 05 I would check the thermostat. With the 03 that is normal, my 02 cuts on and off around the same range. I put a switch in so I could turn my fan on when ever I wanted. I run mine once I get to 175...

May 28, 2009 | 2003 kawasaki ZX-6R

1 Answer

Cooling fan for acura tl 2000 does not work


If you can locate the temperature switch, looks like a large bolt head with 2 wires on it, bridge the wires on it, and this should make the fan work. If the fan works then this switch is faulty. If the fan doesn't then it could be the fuse, or a broken wire.
The fan switch is either on the radiator or on the thermostat housing.
If you can get to it easy, short across with a screwdriver.

Apr 27, 2009 | 2000 Acura TL

Not finding what you are looking for?
2001 kawasaki ZX-6R Ninja Logo

Related Topics:

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...