Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic

2 Answers

Locking & unlocking new bike

My boyfriend just purchased a 2010 HD bike. This one has a lock which is very different from his previous 2 bikes. He is stranded in a parking lot right now & can't get his bike unlocked. Can you help? Any suggestions?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 145 Answers

Maybe this video will help :)

Posted on May 29, 2010

  • Wolf
    Wolf May 29, 2010

    keep in mind you may have to wiggle the forks back and forth alittle while unlocking. if theres any pressure on the lock pin, it will not disengage


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

There is trick. Alot of people have this problem. Moving the steering all the way to the left usually can help but sometimes you have to just keep trying.

Posted on May 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do you need to lock down your bike rack?

Lock it down! No matter if your new bike rack is a hitch mount or roof mount, always get a lock for your rack. The boldest bicycle bandits and parking lot purloiners are not easily discouraged, and simply locking your gear to an unlocked rack is an invitation to take everything-rack and all.

Apr 24, 2013 | Cycling

1 Answer

I have lost the key of ducati hypermoterd 2010 , can

In order to get a new key that is coded to the ignition disable of the bike you would need to purchase a new Dash, ecu, ignition, fuel cap, and seat lock.

Sep 10, 2012 | 2010 Ducati Hypermotard 796

1 Answer

How do i use the schwinn airdriver 1100 pump

This pump is a bit strange to use. The valve in the filler head is odd in that it controls the flow of air in both direction...which is not a great design in my opinion...but it does allow for use in different filling applications. The trick is getting the pump into its different filling "modes"

For a Schrader bike valve:
1. Make sure the pump is in "tire mode" by blowing into the valve with your mouth. If you then pump the handle you should feel air filling your mouth.
2. Put the "locking lever" in the unlocked position, the unlocked position is when the silver metal lever is parallel to the air hose, or said another way it makes an "L" with the air outlet that goes on the tire air filling stem. To verify this is correct, look in the air outlet and move the lever from locked to un-locked, you will see slight change in the diameter of the outlet.
3. Push the air filler hole over the schrader valve really hard and make sure it is seated all the way down. Close the "locking lever" (silver metal lever should now be perpendicular to the air house and be in line with the air outlet... i.e. point straight out away from the tire filler stem.
4. Pump.

For a Presta bike valve:
1. Make sure the pump is in "tire mode" again.
2. Take off plastic caps off presta valves on bike tire.
3. Unscrew the little nut on the presta stem to allow the tire valve to open when pressure is applied (you can test this by pushing the stem in a little and air should escape, the nut holds the valve closed, so it needs to be loosened).
4. Take the adapter from the locking lever (silver metal lever) on the pump and screw it on the presta valve. The adapter is the brass looking thing. Screw the rubber gasketed side down on the presta valve.
5. Press the air pump tire filler outlet onto the adapter.
6. Close the locking lever to seal the filler head on the adapter.
7. Pump.
8. Unlock the locking lever and pull it off quickly.
9. Unscrew the presta adapter and screw down the presta valve nut but just finger tight.
10. Screw on the plastic cover cap for the presta valve.

To Fill a Ball:
1. Twist the ball pin filler out by rotating the gray plastic tab around until the ball pin filler is pointing straight out (in-line with the air hose).
2. Make sure the pump is in "Ball mode" by again blowing into the filler. Sometimes shaking the filler valve really hard is necessary.
3. Put the filler pin into a ball.
4. Pump.

Hope this helps.

Apr 27, 2011 | Schwinn Cycling

1 Answer

I purchased a new YahamaYZF-R15 on 18Th March 2010, did all the servicing at your approved dealer, at the prescribed intervals. On Oct 11th 2010, the m/c refused to start , took it back to your service...

Any device can fail prematurely, Yamaha should back you up if they ever want to sell you another bike. I would contact the factory district managers and go up from there, motorcyle mags too, some TV stations News depts have a troubleshooter/ombudsman type deal, newspaper may also, good luck. read the warranty in fine print.

Nov 01, 2010 | Yamaha YZF-R15 Motorcycles

1 Answer

My first time on a road king. do i need the key to turn on the ignition? Is the key just for the steering?

The key is used for 'Locking" and "Unlocking" the ignition lock. As long as the lock is unlocked, you don't need the key to ride the bike. But, neither does anyone else. When you walk away from your bike, anyone can jump on it, turn the switch on and ride off on it. That's why us old timers used to have the manually operated petcocks on our bikes. We'd turn the gas off. Most crooks wouldn't think to check to see if the gas was turn on. If they tried to steal your bike, they'd get just about out in the road and the bike would shut down due to no gas in the carb.

Good Luck

Oct 21, 2010 | 2000 Harley Davidson FLHRCI Road King...

1 Answer

Sterring lock problem 2005 FLHT Harley Davidson

This is an active recall. Call a dealer, as long as your bike resides in the grouping of bikes, you will get a new ignition switch installed free of charge at no cost to you.

Jun 13, 2009 | 1991 BMW K 100 LT

1 Answer

I recently purchased my first bike on friday,the 1800. I would like to replace the pegs from the previous owner extended version back the to stock version. Is that something a do it yourself can tackle?

Yes, it is easy to do. The pegs will either be screwed in or held with a small pin. Remove the locking key near one end of that pin and pull it out, the peg should come right out.

Apr 05, 2009 | Honda VTX 1800 C Motorcycles

Not finding what you are looking for?
2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers


Level 3 Expert

4340 Answers


Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides