Question about 2005 Honda CRF 250 R

1 Answer

WatNut must take out to change gear box oil

Wat nut must I take out wen change gear box oil

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 3,433 Answers

What you are looking for is a plug that has a hex(for allen wrench) in the middle. It should be on the bottom of the transmission, assuming this is a manual transmission.To refill a manual trans, after putting the drain plug back in, Remove the plug on the side of the trans. Same thing on the tool or the plug has a square head. You can use a crescent wrench on the square. Fill the trans thrrough the side hole with the proper oil. Proper level is aproximately 1/8" from bottom of threads of hole Put you pinky in in the hole straight and push downward until the tip of your finger touches oil. Keep your finger straight. Theskin/meat on your finger will give about 1/8" as you press down. That done, chk both plugs and you're done.
If this is an automatic trans, the pan needs to be taken down to change oil. Good Luck.

Posted on May 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gear box filler plug


glue or weld the head of a bolt to it.then use two nuts on the bolt tighten both of them now a ring spanner on the first nut as is held by the second nut.

Dec 16, 2013 | 2005 Nissan Sentra

1 Answer

I keeP on changing the fuse on my ford focus it keeps on burning and even if i put a 15 still it trips and the car wont start but the fuse which suppose to be there is 15 but still it keeps tripping i dont...


You should go to
www.reliable-store.com they have got books on every vehicle and also how to service/repair it,

service/repair/owner's/maintenance manual with
parts info, fuse box, gear box, torque specs,coiling, wiring diagrams, electrical diagrams, fuse diagrams, error codes, etc everything
Worth it

Feb 28, 2018 | Cars & Trucks

1 Answer

Whining sound wen you speed up


does the wining get faster when you speed up if so gear box goosed final drive bearings inside bos shot cheaper to change whole box but just incase cheake fluid level in gearbox first just incase its got no oil in it

Sep 20, 2012 | Cars & Trucks

2 Answers

Wat do you do when your chrysler 300 1999 keeps cuttin off compelety


Check your oil stick and make sure oil is up to the line on the stick.

Nov 07, 2017 | 1999 Chrysler 300M

2 Answers

My 2002 jeep grand cherokee limited is reading low oil pressure but wen i accelerate it goes to middle pressure but then down to low wen i stop wat can be the problem?


Oil pump or other issues
Cam bearings,etc
Bad sending unit

I would put a mechanical oil pressure gauge on it,to verify oil pressure.

Certainly stop driving it ,until you find and repair

Nov 09, 2010 | 2002 Jeep Grand Cherokee

1 Answer

Can not find the gear box nut to change gear box oil


Its not a nut,its a recessed bung,released using allen key
Located bottom /side of box,refill bung just above

Feb 10, 2010 | 2000 Daewoo Korando

1 Answer

Auto transmission or diff grabing when taking off


check the level of oil in the gear-box if the level is low this can cause that problem or definitely u have to change the torque converter

Jul 12, 2009 | 1983 Ford Fairmont

1 Answer

Skoda superb 2004


ecu in gear box is faulty need to replace ecu and change gear box oil

Mar 22, 2009 | 2004 Volkswagen Passat

Not finding what you are looking for?
2005 Honda CRF 250 R Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4818 Answers

yadayada
yadayada

Level 3 Expert

78919 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...