Question about 2003 Harley Davidson FLSTFI Fat Boy

1 Answer

2004 fatboy rear drive belt pulley torque chart i bought new chrome bolts and just want to know what to torque them to ?

Posted by on

  • Anonymous Mar 21, 2014

    Need to know the torque on the 5 bolts that hold the belt pulley {rear wheel}to the cast rim.T50 torx type bolts

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

55-65 Foot pounds, 74.6-88.1 Nm
Any info you need on this bike such as torque values,specs or anything in general let me know,i can help...

Posted on May 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Years fit


Doesn't the Fatboy from wheel have only ONE disc?

So once you bolt the rear disc on, where are you going to bolt the belt drive pulley on the other side?

May 13, 2014 | 1993 Harley Davidson FLSTF Fat boy

2 Answers

Trying to replace water pump can get to last bolt at power steering pump pulley interference 2004 pontiac gran prix gt 3.8


Check this procedure for Pontiac 3.8L Engine - Water Pump
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine coolant.
  3. Remove or disconnect the following:
    Negative battery cable. Drive belt Water pump pulley Power steering pump and move it aside Water pump

    zjlimited_668.gif

    Fig. Exploded view of the water pump assembly mounting-3.8L engine

To install:
  1. Install or connect the following:
    Water pump using a new gasket and torque the long bolts to 25 ft. lbs. (34 Nm) and the short bolts to 16 ft. lbs. (22 Nm) Water pump pulley and torque the bolts to 115 inch lbs. (13 Nm) Power steering pump and torque the bolts to 25 ft. lbs. (34 Nm) Drive belt Negative battery cable
  2. Fill the cooling system.
  3. Start the vehicle and check for leaks, repair if necessary.
Hope helps.

Sep 02, 2011 | 2004 Pontiac Grand Prix

1 Answer

How to change drive belt 2001 harley davidson fatboy


To change the final drive belt on your Fatboy, first disconnect the battery. You have to drain the primary and remove the cover. Take the engine sprocket nut loose and remove the plate in the center of the clutch assembly. Remove the mainshaft nut that holds the clutch assembly on. This nut has LEFT HANDED THREADS. Then, remove the starter jackshaft. Go the right side of the bike and remove the exhaust system so that you can remove the starter. Then take the inner primary cover off. You may have to remove the front belt drive pulley. Since you're in this far, you may as well remove the pulley if you have the proper tools and replace all the transmission seals behind it. Then, remove the rear wheel and the swingarm. Do not bend the new final drive belt into a radius any tighter than about four inches or you may damage the cords inside the belt. You will need a torque wrench that is capable of applying at least 150 foot pounds of torque to the engine sprocket nut and torqe 60-80 pounds in the LEFT HANDED DIRECTION for the clutch assembly. The front belt drive pulley torques to 150-165 foot pounds as is also LEFT HANDED THREADS and you'll need a "belt pulley locking device" to hold it while you take the large nut off and put it back on. If you plan on doing this job, I would advise the purchase of a service manual as sometimes a picture is worth a thousand words.

Good Luck
Steve

Jul 24, 2011 | 2001 Harley Davidson FLSTF - FLSTFI Fat...

2 Answers

How can I replace the water pump on a 2004 Grand Prix GTP superchargered?


WELL YOU NEED TO DRAIN COOLANT SYSTEM.PLACE A LARGE DRAIN PAN UNDER THE RADIATOR TO CATCH COOLANT WHILE DRAINING RADIATOR.ONCE ALL COOLANT DRAINED OUT.REMOVE DRIVE BELT.REMOVE WATER PUMP PULLEY.REMOVE POWER STEERING PUMP AND MOVE IT ASIDE.THEN REMOVE WATER PUMP.MAKE WATER PUMP MOUNTING SURFACE CLEAN THEN INSTALL NEW WATER PUMP AND GASKET IN PLACE.IF WATER PUMP GASKET IS PAPER TYPE PUT GASKET SEALANT ON BOTH SIDES OF THE GASKET.IF YOU HAVE RUBBER GASKET DONT USE NO GASKET SEALANT.INSTALL NEW WATER PUMP TORQUE LONG BOLTS TO 25 FT LBS AND TORQUE SHORT BOLTS TO 16 FT LBS.TORQUE WATER PUMP PULLEY TO 115 INCH POUNDS.TORQUE POWER STEERING PUMP BOLTS TO 25 FT LBS.THEN INSTALL DRIVE BELT.FILL THE COOLANT SYSTEM.START THE VECHICLE AND CHECK FOR LEAKS.

Mar 25, 2011 | Pontiac Grand Prix Cars & Trucks

4 Answers

How to remove alternator on a 2005 range rover


Hi
Click here

the link above should tell you all you need to know if you get stuck or have any problems give me a shout back ok

Oct 26, 2010 | Land Rover Range Rover Cars & Trucks

1 Answer

2004 pontiac grand prix, gtp , water pump replacement.. Do you have to remove the fuse box to get access to remove the pump


no, here is procedure according to autozone.com


3.8L Engine

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine coolant.
  3. Remove or disconnect the following:

    Negative battery cable. Drive belt Water pump pulley Power steering pump and move it aside Water pump

    0996b43f80208f64.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Exploded view of the water pump assembly mounting-3.8L engine


To install:
  1. Install or connect the following:

    Water pump using a new gasket and torque the long bolts to 25 ft. lbs. (34 Nm) and the short bolts to 16 ft. lbs. (22 Nm) Water pump pulley and torque the bolts to 115 inch lbs. (13 Nm) Power steering pump and torque the bolts to 25 ft. lbs. (34 Nm) Drive belt Negative battery cable
  2. Fill the cooling system.
  3. Start the vehicle and check for leaks, repair if necessary.

Sep 29, 2010 | 2004 Pontiac Grand Prix

1 Answer

Instal water pump


3.5L Engine
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the engine cover.
  5. Remove the accessory drive belt.
  6. Remove the idler pulley.
  7. Remove the crankshaft pulley.
  8. Remove the power steering pump pulley.
  9. Remove the tensioner pulley.
  10. Remove the upper and lower timing belt covers.
  11. Remove the No. 3 engine mount.
  12. Remove the timing belt.
  13. Remove the timing belt tensioner.
  14. Remove the water pump.

  1. Installation is the reverse of the removal procedure, while using the following torque values:

    Water pump bolts: refer to the illustration Crankshaft pulley: 130-138 ft. lbs. (180-190 Nm)

3.8L Engine
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Record the radio anti theft code data.
  3. Drain the cooling system.
  4. Disconnect the negative battery cable.
  5. Remove the accessory drive belt. Remove the water pump pulley.
  6. Remove the water pump retaining bolts. Remove the water pump from the vehicle.

To install:
  1. Installation is the reverse of the removal procedure.
  2. Reprogram the radio anti theft code data.
  3. Be sure to use a new water pump gasket. Torque the retaining bolts to 16 ft. lbs.
  4. Torque the water pump pulley bolts to 6 ft. lbs.
  5. Be sure to refill the cooling system with the proper grade and type coolant. Start the engine and check for leaks.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 05, 2010 | 2004 Kia Sedona

2 Answers

Drive pulley bolt torque


I am assuming you're talking about the rear sprocket mounting bolts on the rear wheel. Laced (spoked) wheel - 45-55 foot pounds. Cast wheel, 55-65 foot pounds.

Jul 27, 2010 | 2006 Harley Davidson XL 1200 C Sportster...

1 Answer

My belt tensioner pulley broke at the bolt that bolts to the bracket. I bought a new one and I was wondering if there was an easier way to replace the tensioner pulley other than removing both the upper...


You should only remove the drive belt shield if you raise the car. Below are step-by-step instructions per the repair manual. Drive Belt Tensioner
Removal & Installation To Remove:
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Remove the drive belt shield at the right wheel well.
  4. Remove the drive belt.
  5. Remove the drive belt tensioner mounting bolt.
  6. Remove the drive belt tensioner.
To Install:
  1. Install the belt tensioner. Torque the mounting bolt to 21 ft. lbs. (28 Nm).
  2. Install the drive belt.
  3. Install the drive belt shield.
  4. Lower the vehicle.
  5. Connect the negative battery cable.



Oct 30, 2009 | 1999 Plymouth Grand Voyager

1 Answer

How to install timing belt on 1998 vw beetle


Instructions
Things You'll Need: · Set of quarter-inch drive sockets Quarter-inch drive ratchet Set of half-inch drive sockets Half-inch drive air gun Set of metric wrenches Special tools for holding camshaft timing #2065-A and injection pump #2064

Step 1

Remove the accessory drive belts and the accessory drive belt tensioner. Remove the upper timing belt cover and the valve cover. Turn the crankshaft clockwise until the No.1 cylinder is atop, dead center, with the flywheel timing marks aligned.

Step 2

Install the special tool setting bar (#2065-A) on the rear of the camshaft. If it does not fit, turn the crankshaft once more and line up the timing marks again in the hole of the transmission housing.

Step 3

Insert locking pin #2064 into the injection pump to hold it in position. Remove the crankshaft pulley bolts, the crankshaft pulley and the lower timing belt cover. Loosen the tensioner pulley nut and allow the tensioner to move away from the belt. Loosely tighten the nut to hold the tensioner out of the way. Remove the top guide pulley and the timing belt.

Step 4

Make sure that the timing mark on the flywheel is lined up and that the camshaft setting bar and injection locking pin are in place. Loosen the camshaft bolt a half turn and tap the sprocket with a soft mallet to loosen it off its taper. The sprocket should move freely. Install the top guide pulley and torque to 18 foot pounds of torque.

Step 5

Install the new timing belt, starting on the right side and working counterclockwise. Keep the tension on the right nontensioned side. Loosen the tensioner pulley nut. Using the two-pin wrench, turn the tensioner pulley clockwise until the notch and raised mark are aligned. Torque the tensioner pulley nut to 15 foot pounds of torque. Make sure the flywheel timing mark is still aligned.

Step 6

Torque the camshaft bolt to 33 foot pounds of torque. Remove the locking pin from the injection pump and remove the camshaft setting bar. Turn the crankshaft two turns and check the alignment on the flywheel. Make sure that the setting bar can be inserted easily and that the injection pump locking pin can be inserted. Install all components in reverse order of removal and torque the crankshaft bolt to 18 foot pounds of torque.

My Recommendation - Pay an authorized VW mechanic $500 to replace the timing belt water pump an tensioner, and sleep better knowing that the job was done right. Just too many places for a novice car mechanic to screw up. jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });

Oct 06, 2009 | 1998 Volkswagen Beetle

Not finding what you are looking for?
2003 Harley Davidson FLSTFI Fat Boy Logo

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...