Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

Cut in final drive belt on 2007 flhtcu how do you remove it & replace

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

This is a major job. This is the bad thing about a belt type final drive. You must remove the entire primay, outer primary cover, clutch and primary chain, starter, and inner primary. You must also remove the rear wheel and the swing arm to replace the belt. That's why the job is so expensive plus the belt itself ain't cheap. If I can help you further, let me know.

Good Luck
Steve

Posted on May 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the speed sensor on a 2007 Harley Electraglide Ultra Classic???


Dan , VSS is under the starter in the back of transmission. may have to remove starter to get easy access. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to replace VSS vehichle speed sensor on 2007 FLHTCU Ultra classic...
2009 Harley FSXTC Speed sensor removal and replacement part
vss location Harley Davidson Forums
Harley Speed Sensor Fix My Hog

Jul 19, 2016 | Harley Davidson 2007 HarleyDavidson FLHTCU...

1 Answer

Replace serpentine belt


Hello Cheri,


Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions Section at AutoZone.com
  2. Rotate the drive belt tensioner counterclockwise to release the spring tension.
  3. Remove the drive belt.
  4. To install, reverse the removal procedure. Make sure the belt is properly seated.

2WD 3.9L SFI OHV 6cyl

26195763-lqzhj1ypufbknumyp3wv1g3w-2-0.jpg

May 15, 2016 | 2007 Chevrolet Uplander

1 Answer

Need diagram to replace tension spring for drive belt


Go to the manufacturersame website, enter in the the model number and look under diagrams for the pic of your tractor. My troy Bilt has 2 belts, one for the cutting deck and the other is the drive belt. I would replace both as the cutting deck needs to be removed and it's fairly simple and will save you time. It sounds let the drive belt is the reason for the tractor not moving. Hope this helps.

My tractor is a 2007 troy Bilt super bronco with a new fresh installed motor.
11_3_2015_1_18_00_pm.jpg11_3_2015_1_18_01_pm.jpg11_3_2015_1_18_02_pm.jpg

Nov 03, 2015 | Garden

2 Answers

2007 chevy tahoe cut off while driving


First guess would be faulty fuel pump. Maybe clogged fuel filter.

Sep 30, 2014 | 2007 Chevrolet Tahoe

1 Answer

How to replace a serpentine belt in 1996 bravado


Pull the tension off the tension pulley & remove belt
or just cut it off

Use a very long 1/2" drive ratchet in hole on tensioner

Make a drawing before removal

Nov 29, 2012 | 1996 Oldsmobile LSS

1 Answer

Harley drive belt wont stay tight after adjustment


Hi Djpiccir, sounds like your axle nut is bottoming on the axle shoulder due to wrong washers or placement of washers. For more information on your problem please visit the website below and good luck. http://www.stcharlesharleydavidson.com/OEMpartfinder.htm#/Harley-Davidson%C2%AE/FLHTCU_FC_ELECTRA_GLIDE_ULTRA_CLASSIC_(EFI)_(2007)/REAR_WHEEL/99456-07B%5CFC/99456-07B%5CREAR%7C~WHEEL%5CFC

Apr 21, 2012 | 2007 Harley Davidson FLHTCU Ultra Classic...

2 Answers

I own a 2007 Harly Davidson Street Glide with the motor running n I am in 1st or 2nd gear I let off the gass I get a noise n when I engage the clutch the noise goes away


I'm not sure what you mean by "engage the clutch". If you mean when you pull the clutch lever, the noise goes away, I'd check the tension on my final drive belt. If the belt is loose, when the engine tries to slow the motorcycle down, the final drive belt tries to rise up off of the front belt pulley making it rub the underside of the starter to inner primary housing. When you pull the clutch lever in, you disengage the engine from the transmission and the engine breaking force is removed from the front pulley and the belt goes back down on the pulley.

Good Luck
Steve

Feb 21, 2011 | 2008 Harley Davidson FLHX Street Glide

1 Answer

Steps needed to change transaxle belt


lift the front of the tractor up at least 3 feet and lower the mow deck to give you clearance. push the clutch pedal and lock it down to release belt tension. remove the mower belt from the engine pulley only. remove the trans belt from the idlers about midway back then from the trans pulley & finally from the engine pulley. put the new belt around the engine shaft above the mower drive pulley but not on the drive pulley then around the trans pulley. now you can put it on the drive pulley and finally on the idlers. make sure you have it under all the various keepers or the belt will shred in like 10 minutes. release the clutch pedal & check the belt again to ensure it is in the correct place. replace the mower drive belt & ensure that didn't come off other pulleys in the process. lower the front of the tractor and test

Oct 14, 2010 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

Install belt on toro mower model 70041


For removing/replacing the deck belt, the general method is:
  1. turn off engine, remove key and set parking brake
  2. disengage blade by putting blade engage lever into off (disengaged) position
  3. lower the cutting deck to the lowest position (closest to the ground)
  4. relieve the belt tension (depending on the model, use a 3/8 inch ratchet set to tighten in the square hole of the idler bracket)
  5. remove and replace the belt
NOTE: it's not necessary to completely remove the cutting deck.

Useful diagrams for removing the cutting deck, http://216.213.143.2/ProAuthor/ManProc.cfm?ManualID=425&ProcID=14794

For deck belt diagrams, http://216.213.143.2/ProAuthor/ManProc.cfm?ManualID=425&ProcID=14796

If the transmission drive belt needs to be replaced, several components must be removed and special tools (i.e. air/impact wrench) used in order to change the tractor's transmission drive belt. See an Authorized Toro Service Dealer to have your drive belt replaced.

Sep 09, 2009 | Toro Lawn Mower With Toro Power Tools

2 Answers

Final Belt Drive on HARLEY DAVIDSON


Belts = quite, durable, less cost to replace.
Chain = noisy, last longer, messy oil spots on floor, good ones cost $400.00 or more, have to keep adjusted, hard to break. Im a chain man myself.

Jul 03, 2009 | 1993 Harley Davidson FLSTF Fat boy

Not finding what you are looking for?
2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...