Question about 2008 Suzuki GSX 1300 R Hayabusa
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Also- IF you have recently unbolted the inertial sensor under your seat, and it's not sitting upright any longer, it will not let the fuel pump pump the fuel... Don't ask me how I know..
It's a little black box under the seat with "UP" and an arrow on it..
Posted on Jun 03, 2010
SOURCE: I have a 2000 hayabusa
Crank is the same as Turn-over.
Are you saying the start motor will run when you press the switch but the motor will not turn over? That is a starter problem ... If the starter motor is turning the motor over but the engine is not firing - have you checked the kill switch?
Otherwise, I believe you have a ignition time and/or carb/choke problem. When was your last professional tune up? If you cant remember, it is time for a professional tune up. Tell the mechanic it will not start using the starter but it will when you push it. BTW, this bike is too big for you to be pushing to get it started. Besides, the girls will not want to ride with you if you have to push it to get it started. Be cool - get it tuned up. Spring is just around the corner where I live. Spend the summer riding - not pushing.
Thanks for your question today.
Posted on Mar 13, 2011
there is a plug under your seat with 2 wires that you need to short out. The fI code is a dealer code like a check engine light on your car. You need the actual problem code. turn the bike on and keep it running short out the two wires in a white harness under your seat and then the f1 will change to a C## code.
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)
Also a good place to look to make sure you have the correct wires is :
it is a great site to belong to for future issues or just for fun
Posted on Sep 17, 2009
hey mate, i had the same trouble with my bike came up red light with FI it ended up being the charging circuit and i had to replace the regulator/rectifier to fix it...
Im guessing the FI stands for fuel injection and there is not enough charge for it to run the fuel injection system...
could be the same problem with your bike, easiest way to check is to run a multi meter that is set to volts dc over the + & - on the battery and see what its got then start the bike and it should go fluctuate between 13.0v and 13.5v...
If it just stays on 12v and drops slowly it is not charging the battery!
Posted on Sep 22, 2009
Testimonial: "Thanks Brad, you rock! I will check that out and see if that is my problem!"
Tips for a great answer:
Jul 01, 2015 | 2011 Suzuki Hayabusa 1340
Apr 06, 2014 | 2004 Honda CBR 125 R
FI stands for Fuel Injection. The fuel system sensors have detected a problem. It could be anything > a dirty air filter restricting airflow, a plugged injector, an error in fuel mapping, any number of things. Serious problems can trigger the computer to prevent the engine from starting until the problem is fixed. You will need to take the bike to a dealer to have them plug in a code reader. The code reader will tell you exactly what problem has been detected. There is also a chance a sensor has gone bad and is giving a false signal. Keep that in mind. Now determine if you want to do the fix or have the dealer do it. Please rate my answer.
Jul 27, 2011 | 2002 Suzuki GSX-R 600
Apr 04, 2011 | 2002 Suzuki GSX 1300 R Hayabusa
Aug 22, 2010 | 2006 Suzuki GSX 1300 R Hayabusa
Aug 01, 2010 | 2001 Suzuki GSX 1300 R Hayabusa
Feb 10, 2010 | 2005 Suzuki GSX 1300 R Hayabusa
Nov 22, 2009 | 2002 Suzuki GSX 1300 R Hayabusa
Aug 23, 2009 | 2005 kawasaki Z 1000
Oct 27, 2012 | 2008 Suzuki GSX 1300 R Hayabusa
454 people viewed this question
Usually answered in minutes!