Question about 2001 kawasaki KLX 300

1 Answer

Have 2001 Kawasaki Bayou 220. Low voltage at battery terminals.

Have 2001 Kawasaki Bayou 220. Low voltage to battery (around 2 volts) when running. Battery has completely discharged from lack of enough voltage, so I pull start. Lights work dimly when running, and get slightly brighter when I apply the hand brake. What is causing my low voltage situation?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 198 Answers

Have the voltage regulator checked for the proper output

Posted on May 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Decompressor problem 1993 Kawasaki klf400 engine won't turn over.when engine gets to compression stroke the one way starter bearing squeals.


Hi, Frank and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.kawasakimotorcycle.org/forum/kawasaki-atv-mule/118754-klf400-b1-wont-start-please-help.html
Kawasaki Bayou not starting
Kawasaki Bayou 400 service manual repair 1993 1999 KLF400 Download Manuals...
OEM Parts for Kawasaki
Owner Manuals Service Manuals Kawasaki Vehicles

Jan 15, 2017 | kawasaki Motorcycles

1 Answer

1988 klf300 bayou no spark, installed a new cdi voltage regulator,stator,and coil ran for four days and now no spark. what do you think is wrong.


Hi, Jeff sounds like you have a faulty wire connection somewhere otherwise the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting, leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Another no spark bayou any help left out there
Kawasaki Bayou 300 spark problems
https://www.tradebit.com/usr/valuablemanuals/pub/9003/1986-2006KawasakiKlf300Bayoufree.pdf
OEM Parts for Kawasaki
1988 Kawasaki Bayou 185 Owner Manual

Jan 14, 2017 | Motorcycles

1 Answer

86 kawasaki 300 bayou, turn the key on, hit start button and there is nothing. i did find a wire terminal on the regulator / rectifier Fixed it and still nothing. what component should i look at..?


Hi, Lee and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and downloads that you will need please visit the websites below. Good luck and have nice a day.
kawasaki bayou wont start
ATV Connection
DOWNLOAD 1986 Kawasaki 300 Bayou
http://www.bikebandit.com/aftermarket-parts
Owner Center

Jan 27, 2016 | kawasaki Motorcycles

1 Answer

What list of things that control my neutral light from coming on for my kawasaki bayou 220


Bayou 220 250 KLF220 KLF250 Kawasaki Service Manual ...

www.cyclepedia.com/...manuals/kawasaki...manuals/kawasaki-klf250-ba...
The Kawasaki KLF220/250 Bayou requires the valve clearance, engine oil and oil filter be inspected every 600 miles. Keep your Bayou free of problems and in ..

Aug 05, 2015 | kawasaki Motorcycles

1 Answer

What amperage should my


It all depends, most bikes have a low amp rate for charging around the 1 to 1.5 A mark. What you need to check is the voltage across the battery with the engine running. The normal voltage across a battery is 12.5 to 13 volts. With the engine running you should see about 14.4 volts. Bike batteries like a low rate charge.

Sep 03, 2014 | 2009 kawasaki Vulcan 900 Classic LT

1 Answer

How do you set the timing on a 2001 Kawasaki Bayou 220?


how to get hub off 220 bayou to put a new timing chain, do I have to have a special tool

Apr 07, 2010 | kawasaki Full Suspension Mountain Bike Men

1 Answer

No key for our kawasaki bayou 220


On the Bayou 220 you have 2 wires from the Ignition Switch. If I was you I would wire them 2 to a toogle switch or push bottom start.

Nov 07, 2009 | 2001 kawasaki ZX-6R Ninja

Not finding what you are looking for?
2001 kawasaki KLX 300 Logo

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77201 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...