Question about 2002 Ducati 998 R

1 Answer

Gilera purejet starts revs doesnt really drive

Hi my gilera runner purejet 2005 starts and revs up fine on the stand but as soon as i try and ride it she pops and splutters and doesnt have much go it her has anyone had the same problem or know what could be up? i have a spare engine with a leaking waterpump i can take bits from! Thanks

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

هلا بكم

Posted on Aug 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air mixture/idle speed screw settings on a gilera runner purejet 17.5mm delorto carburetor 70cc kit


Turn the screw all the way in snug clockwise then 3/4 turn counterclockwise. Then stop. You should be ready to start the motor.

Jan 01, 2015 | 2005 Gilera Runner VX 125

1 Answer

My gilera runner revs so far (about 30mph) boggs and revs bogs and revs etc. help


Do you have a sports exhaust fitted? If so,try it with the standard exhaust,see if its any better

Jul 17, 2011 | 2005 Gilera Runner VX 125

1 Answer

2005 Gilera Runner 50 PureJet won't start


Hi, Gtakriz and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Gilera Runner 50 Purejet Wont start and often stalls
Scooter Troubleshooting Scooter won start All about Scooters
http://www.cr-service.se/Piaggio%2050%20cc/Service%20manual/PIAGGIO_MSS_RUNNER%20PJ.pdf
Gilera RUNNER PUREJET 50 2005 Parts
Gilera Runner Wikipedia

Jun 30, 2017 | 2005 Gilera Runner SP 50

2 Answers

Everyday when i leave my gilera runner vx i have to let it warm up as if i try drive straight away it bogs and cuts out what is the problem?


The choke maybe cutiing out too soon or it is the air temperature that is cool.
Let it warm up for a few minutes before riding off.

Jan 25, 2011 | 2005 Gilera Runner VX 125

2 Answers

Gilera purejet starts revs doesnt really drive


Your carb jets may need a good clean ,also check your air filter it may need changing along with new spark plugs .

Mar 22, 2010 | 2002 Ducati 998 R

1 Answer

Gilera runner 125 cuts out as soon as i use the throttel


clean the carb out...make sure you clean the jets!!!

Mar 22, 2010 | 2005 Gilera Runner VX 125

3 Answers

I have a gilera runner 50 sp and it wont start


Has it been laid up for months? Did you leave any gas in it untreated? You may need to boil out the gas tank . Try a carb cleaner first that you add to the gas.Check the plugs.Are they black/oily (too rich / worn ring), Tan ( correct ).they tell a lot about the condition of the engine. Good Luck

Sep 15, 2009 | 2005 Gilera Runner VX 125

1 Answer

Gilera noly starts when revved


hi mate on the carb there will be a screw get a cross head screw driver and turn this screw in a 1/4 of turns this is the idle screw which should bring the revs up a tad remember its the screw that is sticking out good luck

Jul 23, 2009 | 2005 Gilera Runner VX 125

Not finding what you are looking for?
2002 Ducati 998 R Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

bobkoure

Level 1 Expert

36 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...