Question about Motorcycles

1 Answer

On power when pulling away - Motorcycles

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

You probably have a fouled spark plug or bad spark plug caps.Try plugs first. This is the cheapest thing to try to fix the problem. spark plug caps should be 5000 ohm . If they read higher or lower than that replace them. NGK makes cheap replacements. If they are part of the wire you may have to get from dealer.

Posted on May 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brakes locked like in park and is sending surge back through the truck causing the module for brake system to blow. Can pull with out power but as soon as power is added will lock. Any suggestions?


Sounds to me like your break-away key has pulled out! Make sure your break-away key is FULLY IN PLACE, and that the break-away switch hasn't simply failed.

Apr 29, 2015 | Jayco 2013 Jay Flight Swift 264BH

1 Answer

Escort struggles to pull away and no power when moving


Either your timeing is off or your fuel fiter could bee clogged

Jul 09, 2014 | 1998 Ford Escort

1 Answer

Readout is showing "reduced engine power"


CHECK AIR FILTER ,AND HOUSING FOR LEAKS ,ALSO HAVE SOMEONE HOOK A HANDHELD SCANNER AND READ SERVICE CODES .
COULD BE EGR PROBLEM , AIR LEAK ,VACUMN LEAK ,LEAKY INJECTOR , ETC
CLOGGED AIR FILTER
AIR FILTER NOT SEATED RIGHT IN HOUSING

Feb 02, 2013 | 2004 Chevrolet Silverado 2500HD

1 Answer

Macbook pro mb766ll will not turn on. Light blinks on for 1 sec then goes away . black screen


i would take the battery out and just use AC power and when you push the button pull out the power straight away.

Jun 16, 2011 | Apple MacBook Pro MB766LL/A 17-Inch...

1 Answer

Flat spot on pull away


I would take it in straight away, sound slike there is a problem with your throttle machanism or worse yet in your ecm or efi module

Oct 09, 2009 | 2008 BMW R 1200 GS Adventure

2 Answers

Spark problem


maybe when you are pulling the wire just a little you are making a better connection, make sure your wires are all in good shape, it may be just loose

Nov 20, 2008 | 1989 Suzuki Rg 400

1 Answer

Uno,power


Sounds like you got some bad gas. I would either try an additive to remove water and some octane boost. If that doesn't work you will need to drain the tank. This has been a real problem with the price of gas going up. Some stations in my area have been shut down for putting water in the gas. If it was running fine before you got gas, then more than likely this is your problem.

Rtae this as a Fixya if this solves your problem. Ask more questions if you need to.

Jun 16, 2008 | Fiat Strada Cars & Trucks

1 Answer

Bmw 323i loss off power cutting out


have the catalytic converter checked out...if they clog it will make the car run wrong and cut out and die

Jun 15, 2008 | 1999 BMW 323 Series

1 Answer

Removing cd rom


Preparation Steps before removing CDROM:

1.Power down and remove power to the system.
2.Remove access panel.
3.Remove CPU fans and fan basket.
4.Pull the system tray out until it stops.


To remove the CD-ROM drive:

1.Disconnect the power and signal cables from the CD-ROM drive.
2.Loosen the thumbscrew located in the fan basket area to release the metal locking bracket.
3.Slide the metal locking bracket away from the center of the server.
4.Push the CD-ROM drive out of the front of the chassis from the interior of the system.
5.Pull the CD-ROM out and away from the chassis.

Apr 12, 2008 | HP Compaq ProLiant ML530 Server

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...