Question about 2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

Engine idle increases 200/300 r.p.m. after engine is hot.?

Bike runs great all the time but engine idle increases to around 1100 to 1300 rpm at idle after riden and engine is hot. motor is stock other than rineharts true duals and a power commander III with k@n air filter. bike has been dyno tuned last fall. this just started after riding it 5/600 miles this spring. i've ran carb cleaner thru the intake to clean any varnish. what next ? please help! any suggestions welcome. thanks jf

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 623 Answers

Vacuum leak?

Posted on May 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 ford escape over heats while idleing


There are a few things which should be happening to prevent both problems.

There is a fan relay which senses heat and then turns on the electric cooling fan. Around this time, an idle control should cause the RPM to increase to help circulate the water in the engine.

Sounds like the engine is getting too lean to run because these automatic controls are not working. The hot engine is running lean.

Apr 17, 2014 | 2003 Ford Escape

1 Answer

Honda shadow vt1100c 1986 idile to low after running awhile


There's an idle adjustment screw. The bike runs faster when cold because the fuel\air adjustment is richer on a cold engine. When the bike warms up, the fuel becomes more lean in mixture because the heat causes the fuel to expand, i.e., less molecules of fuel to the firing sequence of the piston. When the bike is warmed up, after say ten minutes, the heat causes a leaner mixture, so adjust the idle on a hot engine (about 1000 rpm more or less). The bike will idle faster when cold, then drop rpm's as the engine warms up. Good luck

Sep 17, 2013 | Motorcycles

1 Answer

I have a 95 mustang v6 that I got as a project. It had blown was gasket and ran rough at idle with lack of power. I redid heads and gaskets etc it runs great and has good power but still idles rough at...


Idling is too slow at 500 rpm.......think about at least 650 rpm to charge the battery and keep up inertia for better take-off power.
Find out how to increase rpm,whether it's a screw-stop adjustment or a timing problem. don-ohio (:^)

Jun 12, 2013 | Cars & Trucks

1 Answer

Idle speed around 2000 rpm, 1st ride of the year , had this issue. I followed my Manual info and adjusted Cold and Hot adjustments. When restarted the idle was close to normal, but after a minute or 2...


Adjust the idle speed ONLY when the engine is at full operating temp. It should be idled at about 1000 RPM. It will probably be too low when cold and you may have to use the throttle control to keep the engine running until it gets completely warmed up. On the carburetor equipped engines, you cannot adjust the bike where it will idle cold and not be too high when it gets hot. The only way you can get this is with fuel injected models.

Good Luck
Steve

May 02, 2011 | 2000 Harley Davidson FLHT Electra Glide...

1 Answer

2004 Honda CBR 1000RR Stalls


how old is the battery in the bike? i just worked on a bike recently that wouldn't run right until i installed a new battery. have you ever changed out the plugs? also, make sure your air filter element is clean.

Jun 01, 2010 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

Cutting out at idle


the batery is ok if the engine start avery time. Also the volts are ok.
Have you made any modifications on it? Sport exhaust, sport air filter?
Check also the air filter. Make sure is clean...
Idle speed should be around 1000-1200 rpm. You should have a screw to fix the idle speed. Check it on the carburetors area, or download the manual from internet.

Cheers.

Apr 12, 2010 | 2003 Suzuki SV 650

1 Answer

The engine will not idle when cold


possibly the coolant temperature sensor is faulty

Sep 05, 2009 | 1995 Subaru Legacy

2 Answers

Engine cuts out with clutch engaged.


idle adjust?
there SHOULD be an adjuster under the seat or gastank within easy reach. Clockwise to increase rpm, ccl to decrease rpm. idle around 1400rpm when engine is at normal operating temp. Good luck!

Aug 04, 2009 | 2002 Yamaha YZF-R1

3 Answers

Pulsar RPM or idling problem.


sounds like when you say cold you mean very cold. If your choke has variable control on it try using more choke until the motor gets warm. Often times the cold weather causes a leaner condition because the air ppm is so much greater leaving you with a leaner running condition.

Dec 06, 2008 | 2007 Bajaj Pulsar 150

Not finding what you are looking for?
2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...