Question about 2003 Yamaha V Star 1100 Classic
Hi, Boggsette for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha Vstar 1100 Clutch adjustment lower end
OEM parts for Yamaha
Posted on May 26, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On the right side of the bike (right side when ou are sitting on it) just above the rear brake lever behind a small circular plate. remove the plate and the oil filter is inside (you will easily see it). Warning---on these bikes you have to drop the front exhaust header and right floor board in order to change the oil filter unless you install a after market oil filter relocation kit. If you plan on changing your own oil it is highly recommended to install this relocation kit.
Posted on May 15, 2009
You can adjust it by slackening the cable...unless it has hydraulic operation....Otherwise get it replaced before you do more damage..ie clutch dust and debris in the oil, so dont forget the oil and filter change too.
Posted on Jul 22, 2009
r u getin fuel-is the tank valve workin-maybe the float is stuck on carb-test to see if getin spark-ignition system could hav bad wire ie plug or coil connect
Posted on Aug 20, 2009
It is on the back side of the flywheel for the magneto/generator. You will need to remove the left engine side cover then pull the flywheel. It does take a special puller to get the fly wheel off. Once you get the flywheel off, there are 8 allen bolts that hold it to the back side of the flywheel.
Posted on Oct 03, 2009
Yamaha has a curved washer style clutch spring that it uses for this model. These have been prone to slipping from day 1. Normally when you get on the throttle hot and heavy. A new spring will help the situation for a while but you may have to replace the clutch pack to get more pressure through out the clutch pack if the bike has high miles on it. Maybe the dealer would know if the VMAX spring is heavier and would work as a replacement.
Posted on Apr 25, 2010
Tips for a great answer:
May 15, 2014 | 2006 Yamaha V Star Classic
May 09, 2014 | 2003 Yamaha V Star Classic
Feb 21, 2013 | 2004 Yamaha V Star Classic
Feb 02, 2013 | 2003 Yamaha XVS 650 Dragstar Classic
Jan 27, 2013 | 2003 Yamaha V Star 1100 Classic
Jun 27, 2012 | 2006 Yamaha V Star 1100 Custom
Jun 01, 2012 | 2003 Yamaha V Star 1100 Classic
Feb 07, 2012 | 2003 Yamaha V Star 1100 Classic
May 29, 2011 | 2003 Yamaha V Star 1100 Classic
Feb 27, 2009 | 2004 Yamaha V Star Classic
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: