Question about Hartford VR 200X Motorcycles

2 Answers

Chineese Scooter gy6 question!!! ok i have a chineese scooter just put brand new motor in it chineese gy6 i have put 25 miles on it since instalation my question is it is running great and ive been easy on it but i need to drive it about 65 miles round trip at prefibly 45mph but nervous about hurting it driving it that long and that fast do i need to be concerned? will this have bad effects on motor?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,851 Answers

That will be no problem. Leave yourself enough time to stop and check your oil and the general temperature of the engine. Try to vary the speed too. Sustained speeds of 50 or even 55 should be no problem as long as you keep an eye on the oil level and also the general feel of the temperature.

15 mile limits then stop and check as this will only allow for about 20to 25 minute run times.
Check the oil before you leave and you should be fine.
Best of it and Drive Safe.
Thanks-

Posted on May 12, 2010

  • Gary Rice
    Gary Rice May 12, 2010

    Please RATE me high as this is the second time I have advised you and can't tell if you rejected me on some kind of merit system or accepted my advice.

    Thanks
    Gary


×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

A lot of people believe running the engine hard is better for break in. So I would say you shouldn't have any problem. Actually probably better. Just make sure all fluids are good.
Thanks,
Lee

Posted on May 12, 2010

  • 1 more comment 
  • Lee A.
    Lee A. May 12, 2010

    And by running hard I don't mean beating the heck out of it. Actually a ride like this is almost ideal. And always warm up the engine fully before "riding hard" which means high rpm's.
    Thanks again,
    Lee


  • Lee A.
    Lee A. May 12, 2010

    It looks like you asked for assistance from another expert? I have answered your problem so not sure what it is your looking for. If you could pleas accept/rate my solution appropriately I would appreciate it.
    Thank you,
    Lee


  • Lee A.
    Lee A. May 12, 2010

    Some feedback would be great so I can understand what information your looking for or why you passed on my solution as it is more then enough information for your question.
    Thanks again,
    Lee


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

150cc stator


Chinese Junk I am sorry to say. All made as cheaply as possible.

ROKETA MC-19 STATOR

www.roketapartsdept.com/products/ROKETA_MC_19_STATOR-16828-579.html
  1. Cached
Part# MC-19-150-06-01-09. Roketa MC-19-150 Replacement part. May Fit Other Makes and Models.

MC-19 ENGINE PARTS: Roketa Parts Department

www.roketapartsdept.com/catalog/MC_19_ENGINE_PARTS-579-1.html
  1. Cached
ROKETA MC-19 BREATHER HOSE CONNECT. Product ID ... ROKETA MC-19 ENGINE OUTPUT SHAFT. Product ID ... ROKETA MC-19 STATOR. Product ID ...

Roketa 150: Parts & Accessories ' eBay

www.ebay.com/bhp/roketa-150
  1. Cached
  2. Similar
Find great deals on eBay for Roketa 150 in Scooter Parts. ... MAGNETO STATOR 8 COIL POLE GY6 125cc 150cc SCOOTER ATV GO KART ROKETA TAOTAO ...

Roketa Scooter Parts - All Street Brands - Monster Scooter Parts

www.monsterscooterparts.com/scooterparts/street-brands/roketa
  1. Cached
Roketa MC-16T-150 Scooter Parts. Roketa MC-17-50 (Sicily 50) Scooter Parts. Roketa MC-17-150 (Sicily 150) Scooter Parts. Roketa MC-19-150 Scooter Parts.

Roketa MC-07-150 (Bahama 150) Scooter Parts - Monster Scooter Parts

www.monsterscooterparts.com/scooterparts/street-brands/roketa/roketamc07150
  1. Cached
Items 1 - 6 of 6 - 8 Coil Magneto Stator with 3+2 Wiring Connector for 125cc GY6 152QMI & 150cc GY6 ... 19 99. G07-1459. Medium Weatherproof Cover for Roketa Scooters ... Quality replacement parts for the Roketa MC-07-150 scooter.

Roketa Scooter Parts - Chinese Parts

www.motopartsmax.com > Roketa Parts
  1. Cached
  2. Similar
Roketa Scooter Parts By Type ... Air Filters & Intake (19) · Intake Pipes & Water Pipes · Air Filters · more · Cables (16) ... Roketa MC-19-150. Parts List · MC-20-150. Missing: stators

And TAO TAO

tao tao powermax Google Search

Dec 29, 2016 | Motorcycles

1 Answer

Starter motor location in 2010 Hero Honda Pleasure 100


Hi, Eskay for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to Replace Starter Motor on 150cc GY6 Scooter
GY6 150CC Starter Removal Repair New Brushes Custom Oil Seal
How to diagnose and recognise starter motor problems
http://www.manualslib.com/manual/819966/Honda-Motorcycle.html#product-Motor Scooter


Aug 04, 2016 | Honda Motorcycles

1 Answer

Have no spark to plug found a 2 wire clip with the same colors at the battery area that is not connected to anything. dont know where to connect trouble finding manuals or video


My scooter has no spark how to fix. gy6 chinese ... - YouTube

? 2:29
https://www.youtube.com/watch?v=UU4S0Ov9q4c
Aug 24, 2012 - Uploaded by Rolling Wrench
Purchase our "NO SPARK KIT" click the link below: ... Myscooter has no spark how to fix. gy6 chinese scooter 139qmb qmb139 50cc 150cc .... i have a 2003 panterra fusion scooter with a 49cc motor,i just purchased a new cdi box,new coil wire and a new stator and ... Put gas in it tried it again nothing.Missing: rto

RTO 150cc scooter no spark Questions & Answers - Fixya

www.fixya.com/tags/150cc_scooter_no_spark/browse/rto
Ask your RTO 150cc scooter no spark questions. Get free help, advice & support from top RTO experts. ... no spark. Ad. Question about Gas Motor Scooter 150cc.

Nov 29, 2015 | RTO 150cc Gas Motor Scooter

1 Answer

Engine noise


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.GY6 Scooter Troubleshooting Strange Engine Noise
Motorcycle Ticking Problem Fixed
Scooter engine knock 150cc GY6
DIY Gy6 Scooter 50cc to 100cc Kit
How to Install Big Bore Kit on 50cc Scooter Every Step Included 80cc or...




Jan 15, 2014 | Bajaj Motorcycles

1 Answer

What are the signs of a gy6 engine chineese version overheating?


Hi,

This product poses a risk of fire because there is a potential for battery overheating caused by a high resistance connection. Overheating may cause damage to the battery packs and possibly the scooter, which could result in a potential fire hazard.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

May 13, 2010 | Hartford VR 200X Motorcycles

1 Answer

Ok i ut a brand new gy6 motor in my scooter it comes with that break in oil or shipping oil in it it says i need to change the oil at 300 miles ive heard from others dont even run it with that **** oil in...


You do not want to use the oil that is in it when shipped. That oil does not give enough lubercation. If you do use it you will be taking life away from the motor.

Good Luck

May 07, 2010 | Hartford VR 200H Motorcycles

2 Answers

50cc stop working after three miles, brand new, delivered today


have you checked that the spark plug is tight and that the ht lead is on the spark plug?

May 05, 2010 | RTO Gas Motor Scooter

3 Answers

Extreme scooters vintage xm155


If the bike has knobby type (bumpy tread) they do make noise.Just be sure they have the correct air pressure in them.
Try to support the bike so you can manually spin the wheels like if the bike had a center stand.Feel while turning, to see if the wheels feel to tight or loose.And try to feel any play in the wheels. Or hear any stange noise.
While your are at it go ahead a drain the oil and change it with a good quality oil. The bike should have come with a book to tell you what type oil it wants.Dont be afraid to change the oil more than it is suppost to be.They dont hold that much oil and the shifting of the gears will generate alot of break in metal dust that needs to come out of the engine.
To say if you made a mistake in buying the bike remains to be seen because their is no history of the Chinese bikes in this country.
If I could ride the bike I could give you a better opinion.
Another thing you could do is, while riding the bike with it makeing the sound,pull in the clutch and put it in neutral.Is the feeling gone?
This can help to be sure the noise is not engine generated.

Nov 04, 2009 | 2004 Derbi Senda SM 125 4T

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hartford Experts

yadayada
yadayada

Level 3 Expert

79077 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Brad Brown

Level 3 Expert

17099 Answers

Are you a Hartford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...