Question about 1993 Harley Davidson FXR Super Glide

2 Answers

Disassemble the clutch so I can install new primary chain

How do I remove then reinstall the clutch assemly
I so I can change the primary chain.
1992 FXR evo 5speed
I belive it to be all original parts.
I have the primary cover removed,
compensator assembly. removed.

Thanks,
Dave

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Are you trying to remove the clutch assembly or replace the clutch pack.If removing the hub the centre nut is left hand thread.If your replacing the pack leave that nut alone and remove the five bolts around the clutch spring and the clutch pack can be replaced

Posted on May 22, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 623 Answers

Isn't there a big nut in the middle of the clutch pack? Also I am not sure, it might be a left-handed one, check the threads first.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Drive belt installation 2000 electreaglid classic


Remove the rear wheel and then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly and then remove the primary chaincase housing. Support the bike under the rear fork and engine and then remove the pivot shaft and the spacer THEN slip the belt off the transmission sprocket and then install a new drive belt over the transmission sprocket and proceed to reinstall the pivot shaft and spacer after which you can remove the support holding the engine and rear fork and install the primary chaincase housing, the primary chain assembly and the primary chaincase cover and fill the primary chaincase with lubricant up to the bottom of the clutch diaphragm spring. Install the rear wheel and adjust the belt to the proper deflection dimension and confirm that the rear wheel is properly aligned side to side.

Jul 08, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

How do you change the drive belt on a 2006 hd sporster


Remove the rear wheel and then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly and then remove the primary chaincase housing. Support the bike under the rear fork and engine and then remove the pivot shaft and the spacer THEN slip the belt off the transmission sprocket and then install a new drive belt over the transmission sprocket and proceed to reinstall the pivot shaft and spacer after which you can remove the support holding the engine and rear fork and install the primary chaincase housing, the primary chain assembly and the primary chaincase cover and fill the primary chaincase with lubricant up to the bottom of the clutch diaphragm spring. Install the rear wheel and adjust the belt to the proper deflection dimension and confirm tat the rear wheel is properly aligned side to side.

May 21, 2014 | 2004 Harley Davidson XL 883 Sportster

1 Answer

How to replace drive belt on a 1993 harley davidson heritage softail classic?


To remove a Softail drive belt FIRST remove the rear wheel then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly, then remove the primary chaincase housing, place a support under the rear fork and engine, remove the pivot shaft and spacer, slip the drive belt off from the transmission sprocket.



To replace a Softail drive belt FIRST not that all belts, used or new, must never be formed into a loop smaller than 5.0 in. (130 mm), and must never be bent backwards because this can severely weaken the belt and cause premature failure if it, then install the belt over the transmission sprocket, install the pivot shaft and spacer, remove the support holding the engine and rear fork, install the primary chaincase housing, the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster and the primary chaincase cover, fill primary the primary chaincase with oil, install the rear wheel, align the rear wheel and properly adjust the belt tension to the specified deflection.

Apr 28, 2014 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

How to replace drive belt on 1993 harley davidson?


Is it a softail????



To remove a Softail drive belt FIRST remove the rear wheel then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly, then remove the primary chaincase housing, place a support under the rear fork and engine, remove the pivot shaft and spacer, slip the drive belt off from the transmission sprocket.



To replace a Softail drive belt FIRST not that all belts, used or new, must never be formed into a loop smaller than 5.0 in. (130 mm), and must never be bent backwards because this can severely weaken the belt and cause premature failure if it, then install the belt over the transmission sprocket, install the pivot shaft and spacer, remove the support holding the engine and rear fork, install the primary chaincase housing, the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster and the primary chaincase cover, fill primary the primary chaincase with oil, install the rear wheel, align the rear wheel and properly adjust the belt tension to the specified deflection.

Apr 28, 2014 | 2005 Harley Davidson FLSTC - FLSTCI...

1 Answer

I have a 1999 softtail how do i change the stator


Drain the primary fluid. Remove the outer primary cover. The stator is behind the compensating sprocket in the front of the inner primary. Increase the slack in the clutch cable at the adjuster. Lock the primary drive with the locking tool (may be purchased from Harley or Drag Specialties if you don't have one). Unbolt the primary chain adjuster from the inner primary. Remove the comp nut and nut holding the clutch basket on the trans mainshaft (this nut has right hand threads).Remove the primary drive as an assembly.Remove the rotor. It is held on magnetically. Unplug the voltage regulator from the stator. Remove the 4 bolts holding the stator to the engine case, and throw them away. You will need new stator bolts to install the new stator. Do not reuse the old ones. Remove the stator. Installation is the reverse of removal. Some models also require the removal of the inner primary in order to remove the stator. If this is required, replace all the seals in the inner primary while you have it off. A service manual will be a great help if you do this job yourself. Torque specs are rather high for reinstalling the primary drive, so you may want to consider having a shop do the job. Good luck!

Dec 07, 2012 | 2003 Harley Davidson FXD Dyna Super Glide

1 Answer

How do you change a 2002 Harley Road King stator?


Disconnect the battery. Drain the primary and remove the outer primay cover. Take the engine sprocket nut off, take the clutch adjuster out of the center of the clutch assembly and remove the mainshaft nut. This nut has LEFT HANDED THREADS. Remove the nut that holds the primary chain adjuster. Take the engine sprocket, clutch assembly, and primary chain off all together. Then, pull the rotor off the engine sprocket. It can be difficult to get off due to the strong magnets in it. Once off, there are four small bolts holding the stator on and two small screws holding the plug into the case. Installation is the reverse of disassembly. Torque the small Torx bolts that hold the stator on to 40 inch pounds. The engine sprocket nut torques to 150-165 foot pounds with one line of Loctite 271 heavy hold thread locker in it. The LEFT HANDED threaded mainshaft nut torques to 60-80 foot pounds with a single line of Loctite in it. You'll need a primary locking bar to keep the engine from turning while applying torque to the engine sprocket nut and the mainshaft nut.

Good Luck
Steve

Aug 15, 2011 | Harley Davidson FLHRC Road King Classic...

1 Answer

Removal and installation of 1988 harley sportster clutch


In order to remove the clutch from your bike, you must have a special tool. You'll need H-D #34761 in order to remove the snap ring holding the clutch together.

Disconnect the battery, drain the primary, and remove the primary cover. Once you have the primary cover off, you can remove the nut from the compensator sprocket at the engine end of the primary chain.

Install the H-D 34761 or equivalent tool and compress the clutch spring. Remove the snap ring and then back off on the tool to release the pressure on the clutch spring. Once the pressure has been removed, remove the adjusting screw assembly, the outer clutch spring seats, the clutch spring, the inner clutch spring seat, and the pressure plate.

Then you can disassemble the rest of the clutch. Remove the remove the four friction plates and three drive plates. Then you can remove the spring plate and the remaining plates after that. Remove the snap ring that holds the clutch assembly onto the transmission clutch gear and remove the inner and outer clutch shells, the primary chain, and the engine sprocket as a group.

For this job, I would recommend that you purchase a service manual. It's has pictures that show you what you're dealing with and in this case, a picture is truly worth a thousand words.

Good Luck
Steve

Nov 05, 2010 | Harley Davidson XL Sportster 883...

1 Answer

Can not get clutch chain off i need to pull out the tranny 3rd gear is slipping its a 77 sportster


I assume you're talking about the primary chain. To get the primary chain off, you must remove the compensator sprocket from the engine shaft and disassemble the clutch, which takes a special tool to compress the clutch spings, and remove the outer clutch basket. The outer clutch basket is held on by a large nut on the inside that has left-handed threads on it. Once you have all that off, you can remove the four "trapdoor" bolts and pry the transmission out.

Good Luck
Steve

Oct 21, 2010 | Harley Davidson XLH 1000 Sportster...

1 Answer

Remove primary cover 1990 sportster


To remove your primary cover, first, disconnect the battery and drain the oil from the primary. Then, remove any footpegs or shifter mechanisms that might be in the way.

Look on the bottom of the primary cover and you'll see a bolt and locknut. This is the primary chain tensioning device. Loosen the locknut and turn the screws out (downward) to loosen the chain.

Then take the derby cover off. Remove the spring and the locknut from the clutch adjusting mechanism. Remove the bolts that hold the outer primary on. Turn the clutch adjuster screw clockwise as you remove the cover.

When you replace the cover, turn the clutch adjuster screw counterclockwise until it stops. Put all the bolts back in the cover and tighten them. Turn the screw counterclockwise again until it stops and then back off 1/4 turn. Install the locknut, the spring, and the derby cover.

Remove the upper inspection cover and reach in with your finger and check the primary chain tension. Using the bolt on the bottom of the primary, turn it upward (inward) and tension the primary chain to between 1/2" and 5/8" up and down play. Reinstall anything else that was taken off and pour in one quart of primary lube. Reconnect battery.

Good Luck
Steve

Oct 03, 2010 | 2005 Harley Davidson XL 883L Sportster

1 Answer

Whats it take to install a clutch hub for a 1988 police bike flhpt


To install a clutch is not what I call an easy job but not an extremely difficult job either. You are going to need some special tools however.

The tools you'll need are an impact wrench, a large socket to fit the compensator nut and one to fit the mainshaft nut, a primary locking bar, torque wrenches that will torque to 150 foot pounds and 70 foot pounds in the left handed direction, and a special tool required to disassemble the clutch assembly.

First, disconnect the battery, then drain the primary and remove the outer primary cover. Use the impact wrench and appropiate socket to remove the compensator sprocket nut from the engine shaft. Remove the snap ring holding the release plate in the center of the clutch assembly and remove the LEFT HANDED THREADED mainshaft nut. Take the nut off the chain tensioner and remove the primary drive (engine sprocket, adjuster, and clutch assembly) as a unit.

Now, using the special tool, compress the clutch spring and remove the lock ring holding the clutch assembly together. Disassemble the clutch and reassemble it with the new clutch hub. Reinstall the primary drive. Apply one line of Loctite 271 inside the mainshaft nut and torque it to 70-80 foot pounds LEFT HANDED. Apply two lines of Loctite 271 (red) to the compensator nut and torque it to 150-165 foot pounds. This is what the locking bar is for, to keep the engine from turning while applying the torque to these two nut. Adjust the primary chain and reinstallt the outer primary. Add about one quart of lubricant to the primary. Reconnect the battery. Adjsut the clutch and cable.

Good Luck
Steve

Sep 17, 2010 | Harley Davidson FLHRI Road King...

Not finding what you are looking for?
1993 Harley Davidson FXR Super Glide Logo

517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...