Question about 2003 Harley Davidson FLSTC Heritage Classic

1 Answer

Blows the fues for the head lights

When we trun the head lights on it blows the fues

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 623 Answers

There must be a short to ground in the wiring to the lights somewhere. When you say turn on the headlight, aren't the lights on anyway as soon as you turn the switch to start the bike? They should be, that's standard.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 GMC Yukon blows the TBC 2A fues when headlight switch is turned on


Yukon what ? XL , Denali , 2 or 4 wheel drive ?

My GM service info shows it as a 10amp not 2amp
TBC Fuse #60 10A is fuse #60 same yours ?

May 10, 2015 | GMC Cars & Trucks

1 Answer

My dash lights work but no other light inside my car works


the fues blow because there is to much hook up to it buy a 20a to replace a 10a and see if that works

Mar 08, 2013 | Cars & Trucks

1 Answer

I'm fues to my fan keeps going out on my 2006 P.T


More than likely you have an internal fault either in the fan itself or the thermostat that activates it.

For a fuse to blow it has to have a lot higher than normal current draw through it, which is normally refered to as a short. If the fuse blows almost immediately then I would suggest you unplug the fan, and see if the fuse blows with just the thermostat in the circuit. If it blows - replace the thermostat control. If it doesn't blow, plug in the fan and watch it. If it trys to start and then blows the fuse, replace the fan motor.

Jun 30, 2011 | 2006 Chrysler PT Cruiser

2 Answers

1998 Mustang: how to fix horn on 1998 ford mustang...


Verify that your getting 12 volts at the connector of your old horn. if present replaced the horn. if no voltage, verify fuse protector.

May 17, 2010 | 1998 Ford Mustang

1 Answer

Fs 45 stihl


you could try cleaning the back of the head out as it may be jamming onto the shaft.

Jul 18, 2009 | Garden

1 Answer

Why do my fues keep blowing on my daewoo


First I suggest confirm what fuse blowing there and waht circuit and edevices are controled, check some wire broken or bad ground in the line and switch (if have one there).

Keep us updated.

Mar 27, 2009 | 2001 Daewoo Leganza

1 Answer

94 4.3 wont start


CHECK THE FUSIBLE LINK THAT COMES OFF THE STARTER POST.THEY LOOK JUST LIKE A WIRE, BUT THEY GET STRECHY WHEN THERE'RE BLOWN.IF THIS IS THE CASE YOU WILL NEED TO FIND THE CIRCUT THAT CAUSED IT TO BLOW,AND REPLACE THE LINK.

Aug 24, 2008 | 2004 GMC Safari

Not finding what you are looking for?
2003 Harley Davidson FLSTC Heritage Classic Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...