Question about 2008 kawasaki Ninja 250R

1 Answer

When i try to start my 03-250 ninja gas pours out of the exhaust

Wont start and gas pours out of exhaust and overflow tube

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 224 Answers

You need a carb clean. your float needle valve assambly is not functioning properly. could be something preventing the float needle from closing all the way.

Posted on May 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After engine is started fuel flows out of carb vent tube


Hi, Lou and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Carburetor is leaking gas out of overflow tube need help
http://www.instructables.com/answers/What-is-wrong-with-my-carburetor
gas pouring out of bowl vent hole and overflow tube on super Harley...
RM125 Carb keeps running fuel out overflow
Concours Owners GroupTM Sport touring at its finest SM

Dec 12, 2016 | Motorcycles

Tip

How to measure rain fall when your rain gauge overflows


Most rain gauges that you will make at home will only measure up to one inch of rain fall. The problem with this is that if you live in a place where you will get more than one inch of rain your measurement if taken incorrectly will be very skewed. If your rain gauge has been constructed correctly you should have a fail safe in place.

When you construct a rain gauge you should have a measuring tube inside of an over flow tube. The meausuring tube will hold about one inch of rain fall, but when more rain falls the inside tube will overflow into the outer tube. To measure the excess rain fall you will follow a few simple steps.

Start by reading the inner tube of the rain gauge and then carefully empty the tube. Make sure that you don't pour out the water that has overflowed into the outer tube.

Once all the water for the measuring tube has been emptied carefully pour the excess rain water into the measuring tube. To get the most accurate reading try your best to not spill any water out, you can pour the water over a bucket to make sure that if you do spill any out you will catch it and be able to measure accurately.

If there is a lot of overflow you might want to measure a little bit of overflow at a time to get an accurate read. As you measure, write down the measurements and when you finish add up the values to get the reading.

The readings are done in inches so you have a reading that is 1.00 and has an overflow that measures up to .50 then the total read out will 1.50 inches.

on Feb 02, 2014 | Garden

2 Answers

Why is gas pouring from the vent line when I go to start it


You don't say what kind of bike or give any other details so I will go with the obvious stuff first, I am guessing you might not ride it often or let it sit up for awhile. Gas pouring from the vent indicates that a float valve is stuck or the needle valve or seat seal has dried up and has fuel being forced around them as the fuel pump pressurizes the carbs. It is dangerous to run the engine with overflow as you could have a fire so your remedy will require you to pull the carbs to fix the problem.

Sep 11, 2014 | Motorcycles

1 Answer

Honda trx 300ex


If gas is leaking from the tube on bottom of carburetor, the needle valve is worn inside the float bowl on the carburetor. You should also check to make sure there isn't gas in the oil and in the air box before starting and running your ATV. Let me know if you need any more help, Daniel.

Oct 19, 2013 | Garden

1 Answer

I bought my bike with all gas and vacuum lines disconnected and am having trouble with the correct order of routing.


U will have one line of the gas tank this fuel line into the top port on the clutch side of the carb the other two a breather throttle top of carb side and a overflow tube. Hope this helpl good luck

Oct 30, 2012 | kawasaki Ex500d7 Ninja 500r Motorcycle...

3 Answers

I have a 2008 Wildfire Scooter 150cc. The carburator has an overflow tube coming out the bottom and gas just pours out of it when I try to start it. I have check all the tubes and the spark plug they seem...


My 150 carb has the same overflow and is stop by a needle vale screw is it there or missing replace the screw and it should run or plug the hose so it can not run out of the carb.

Sep 13, 2010 | Health & Beauty

1 Answer

95 vulcan 1500 pours gas out of the overflow tubes after start up


Fuel bowl needle is bad and not seating properly to seal the bowl when enough fuel has entered, thus it overflows out of the vent tubes.

Apr 04, 2010 | 1996 kawasaki VN 1500 Vulcan Classic

2 Answers

When i turn the fuel on to start the bike gas pours out the clear tube that comes from the carb to under the bike some were is this line dis conected or broke or is it something more


it's probably just your overflow from the float. it doesn't connect to anything, it just let the fuel overflow come out when your float level is high. if you turn on the fuel petcock and it starts pouring out, your float needle is sticking. clean the carb and the float needle valve assembly and see what happens.

Dec 30, 2009 | 2003 Yamaha TT-R 125

1 Answer

Does anyone have a Vaccum hose diagram for a 1995 Kawasaki ZX6R?


One of these pipes is for overflow gas.You just route it downwards.For the other one I need more info.Some bikes have a second overflow tube tha collects the water near the gas cap on the gas tank and goes the same way like the other one.Blow in them from the loose end having them attached to the tank and see what happens.

May 26, 2009 | 1995 kawasaki ZX-6R Ninja

Not finding what you are looking for?
2008 kawasaki Ninja 250R Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...