Related Tags:
This problem should be removed because:
Problem with kawasaki 1999 ZX-6R Ninja
bike wont start
the alarm system will not de activate
its a meta m16 mykro from what i can find
Suggested Solution (3)
Set the alarm by holding the key fob button until you see running lights flash twice. Turn off the alarm by pushing the key fob button twice and the lights will flash once.
Hi,
Best way to remove it is to follow the wires from the module it's self and remove from where they are tapped into the loom. The only tricky one will be the starter cut out, this will be two wires that break one single wire in the loom, remove both wires, and re-join the single loom wire.
If nothing works you need to contact the dealer with the model no.
Please get back to us if you have any further query or else accept the solution.
Thanks for contacting fixya.com
by Source: how can i remove alarm,meta
Aparajita Batabyal
Over a year ago
I have just today had the same prob when I briefly disconnected the battery to clean the terminals. When I connected the battery again the flahers went off but not the siren, couldn,t get the flashers to stop unless I disconnected one terminal on the battery but even then I could hear the alarm ticking.Tried he solution already suggested to you but as soon as I touched the turn switch the siren sounded. Silenced this by pressing the fob & that seemed to reset the system. At least it,s silent now & nothings flashing.Trouble is my battery is now pretty flat so difficult to know if the prob is actually cured. Hope this helps. Nothing to lose by giving it a go.If you find out more would you let me know. Thnx. Barry
-
My Honda Hornet's immobiliser is not...
My Honda Hornet's immobiliser is not immobilising with use of keyfob. Both fobs have new batteries and engine starts when I over ride...
-
yam r1 no go,put new batts in remotes,meta
yam r1 no go,put new batts in remotes,meta 357t,will not code in,can not turn imobb off to start bike up.(help)
-
My meta M357 immobiliser will not funtion .
My meta M357 immobiliser will not funtion after battery went dud .I have since fitted a new battery but will not function .
-
how can i remove alarm,meta
how can i remove alarm,meta system,model 357t from my machien.im unable to activate and the only way now is to remove,thankyou
-
fault code 11 coming up
fault code 11 coming up and bike will not start Meta arlarm fitted
Tips for Helping simon_mcdowe With Their Issue
- Give detailed step-by-step instructions
- A picture or video is helpful
- Use plain language not industry jargon
- Check spelling & punctuation
Add Your Solution
-
neutral light on my 1999 zx6r will not turn off in...
My 99 zx6r was working fine,I stopped for gas and when I restarted the green neutral light did not go off in any gear I...
-
My 1999 ninja zx6r dies at 5000 rpm. Cleaned
My 1999 ninja zx6r dies at 5000 rpm. Cleaned carbs, changed and check spark of spark plugs, fuel pump and hose. Nothing...
-
I have a 1999 kawasaki zx6 and i need to get new
I have a 1999 kawasaki zx6 and i need to get new carbs because the throtle sticks . I need to know what carbs will bolt...
-
how to install shift pedal on 99 zx6r
external shift mechanism slides in and out
Fix-O-Meter
86
86 people viewed this problem
- 0 people are following this problem. Be the first!
Top kawasaki Experts
Verification:
Please enter the characters below to complete your post
Can't read it? Try a different one
