Question about 2003 Harley Davidson XL 1200 C Sportster Custom

2 Answers

My motorcycle vibrates too much in speed, when I

I have a Sposter XL1200 Custom 2003 an the problem with the motorcycle is that vibrates too much in speed, when I press the clutch the vibration dissapear

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your Sportster 2003, Is not rubber mounted.. It's frame mounted.. Meaning You will feel the higher revs through the bars and pegs, That's why Harley changed there mounting.

Posted on May 25, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

The 45° V-Twin engine is impossible to balance perfectly. For this reason, Harley has started building their Sportsters with rubber mounted engines. If you model is one of the newer rubber mounted versions and it vibrates this bad, the only thing that I can suggest to for you to inspect the engine mounts. Don't forget to take a look at any top engine mounts as well.

Good Luck
Steve

Posted on May 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sometimes my xl1200 will not shift


Hi Michael, for more information on your question please visit the websites below and good luck:
Delboy Garage Harley Sportster Clutch Adjustment

Jul 07, 2012 | 2002 Harley Davidson XL 1200 C Sportster...

1 Answer

Can not pull the choke out on my 2004 harley sportster xl1200 custom


Hi Anonymous, remove the enrichner and diagnois the problem. Good luck.

Apr 16, 2012 | 2000 Harley Davidson XL 1200 C Sportster...

1 Answer

VIBRATION AT 60 TO 65 MPH


Hi Jerry, and the usual suspects are:
1. Wheels and or tires unbalanced, worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain badly worn or links tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect/poorly tuned engine
7. Internal engine problem/ flywheel shift runout should be .003" max.
8. Broken frame
Good luck and have nice day.

Dec 05, 2011 | 2008 Harley Davidson XL1200C Sportster...

1 Answer

2005 xl1200 custom. neutral light is not coming on


Either the light is blown or the neutral switch is bad. The neutral switch is near the front belt pulley beneath the cover. Take the wire off and ground it with the ignition switch on. The light should light up. If not, it's probably the light blown. If it does, the switch is bad.

Good luck
Steve

Sep 21, 2010 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

Turn signal on harley sposter tunr on by thamself


I'd look for a short in the handlebar switch housing or behind the headlight on the side that the signal is coming on. Check the turn signal switch.

Steve

Sep 04, 2010 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

My wife has a 2003 1200 sposter. It is running


I would check both spark plugs then check the timing and if not fixed check the coil to see if it is bad.

Aug 15, 2009 | 2003 Harley Davidson XL 1200 C Sportster...

1 Answer

2008 HD xl1200c sportster fork lock removal.


grind off the rivet.then lock should pull out, then use a slide hammer to pull out the rest of rivet

Apr 01, 2009 | 2006 Harley Davidson XL 1200 C Sportster...

1 Answer

Oil seepage


21 ft lbs then an additional 90 degrees or 1/4 turn.

Mar 14, 2009 | 2000 Harley Davidson XL 1200 C Sportster...

Not finding what you are looking for?
2003 Harley Davidson XL 1200 C Sportster Custom Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...