Question about 2004 Honda CRF 150 F

1 Answer

It will not ideal but it does start and run. the bike is new to me so i dont know much about it. it looks like its been token care of. the air filter is clean. was hoping it would be as simple as turning the screw on the side of the carb. but that did'nt seem to do anything

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The idle jet is not on the side its under where the bowl is in between the one on the side is your lean screw make sure its 2 to 21/2 turn out from sit try adjusting the idle jet screw under in between bowl not the drain screw thats on the side of the bottom this is hiding between the bowl case i made the same mistake

Posted on May 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buell blast smokeing problem


Hi, Bradshawben1 for more information about your issue and free downloads that you will need please visit the websites below, and for specific information or questions, please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
YZF600R Forums View topic Smoking Carb
http://www.badweatherbikers.com/buell/messages/20164/433166.html?1234357121
http://buellmods.com/content/downloads/manuals/blast/2003_blast_manual.pdf
TWIN Motorcycles Buell parts
Buell Motorcycle Owners Manuals

Apr 12, 2012 | Buell Motorcycles

1 Answer

Buell blast smokeing problem


The carburater needs to be serviced - take the bike in for a tune up that includes cleaning the carb and flushing the fuel from the tank and changing your spark plug.

Apr 12, 2012 | Buell Motorcycles

1 Answer

Ok, i recently purchased a DTR 125 R 2000 model with running problems The bike will start with the choke on, then die with the choke off, the fuel/air mixture screw was mashed up so i purchased another...


Sounds like a vacuum leak is leaning out the mixture....check the intake between carb and engine for leaks...another source may be tjhe crankcase seals are leaking.

Mar 31, 2011 | 2000 Yamaha DT 125 R

1 Answer

BIKE HAS BEEN SITTING AND WON'T START


Ideally, you need to change the gas in the tank.
Either way, add some "Seafoam" to the tank to clean the fuel system.
Remove the air filter, and spray a short shot of Starter Fluid into the intake.
Replace the filter and see if the bike will start.

Oct 18, 2010 | 2005 Suzuki Boulevard M50

2 Answers

Bike sputters with no throtle when trying to start. If any throtle or choke is used bike will not sputter at all. If starting fluid is used bike will start. I've changed plugs ,new gas and cleaned air...


Hi
Check/replace inline fuel filter. Put a fuel injector/carb cleaner fluid in the tank and run it through, this will clean any build up that may be in carbs/injectors.
If problem is still persisting then you'll need to get carbs/injectors removed for cleaning and resetting. Hope this helps, let me know how you get on.

Jason

Apr 03, 2010 | 1995 kawasaki ZX-6R Ninja

2 Answers

I have a yamaha virago xv250 03' model. Its done


first thing to do is to drain oil from your motorcycle use wrench 17(size may vary) to open the bolt under your bike and place a drain bucket under it, then remove spark plug using spark plug remover, as for the filter you can use a cross screw driver to remove the air filter, once you replace the spark plug and the air filter let the oil subside for about 3hrs, then return the bolt and place new oil, i dont know if this help but i hope it will

Sep 18, 2009 | 2004 Yamaha Xv 250 Virago S

2 Answers

Engine is cutting out below 5000rpm and missfiring


hi mate change the airfilter black smoke is a sign of a dirty air filter

Mar 28, 2009 | 2005 Yamaha YZF-R1

2 Answers

Carburetor isues? 2007 kymco people 50 2 stroke


best thing to do is screw air fuel mixture screw in all the way the back out 1.5 turns this is a good starting point then trim it out thanks for using fixya!

Jan 12, 2009 | 2005 Kymco People S 200

2 Answers

Having motorbike trouble


have a VR 2000 Supermot and when I bought it the guy had taken off the air filter and box and put a racing exhaust on it. I dont know what other modifications he could have done. Anyway we put the original exhaust back on and just fitted an airbox with K&N air filter and it starts and ticks over fine and runs fine up to about 3 thousand revs and then it kangaroos (stop and start) and it stalled at one point. I checked and there is fuel in the tank. The fuel feed must be ok coz it ticks over and revs fine when stationary. I have a theory that the guy who modified it has put big jets on the carbs to give better air/fuel mixture. Would this explain whats happening? How can I fix it? Thanks for your time. i've been repairing dirtbikes and fourhwheelers since i was 12 with my dad, it sounds like a problem with the jets in the carburetor possibly one clogged with even the smallest piece of dirt will cause this, also how old is the bike, this sounds alot like a problem i had with an old dirtbike, sitting stationary the bike would run like new, yet get on it and put the engine under a load it would start sputterin and runnin like complete garbage, the bike was an 87 bw200 and after messin with the carb i ended up buyin a new one cause it was internally clogged but if its a newer bike i'd definently check the jets, and if you cant figure it out, then a local bike shop could probably diagnose the problem, if you have friends with bikes get suggestions from them on a good local place,,,

Nov 10, 2008 | 2000 Alfer VR 2000 Supermoto

Not finding what you are looking for?
2004 Honda CRF 150 F Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...