Question about 2000 Yamaha DT 125 R

1 Answer

Hi i jus reconnected the batry on my dt125r the lights came on and the power valve motor kicked in but the earth wasnt connected proply and ther was a clikin noise and now have no lights non on clocks apartfrom nuetrel light and power valve not making any noise when you turn the key

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

Check all your fuses. Im not sure where they are located but, behind the plastic side plates, or under the seat. Your problem is most likely a blown fuse.

Posted on May 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1993 3.2l Isuzu trooper...my power windows dont work... how do I fix it


Hi it could be a number of things. Firse check fuzes. Then The most likely is the wires comming from the car into the doors. As a result of years of bending from opening and closing the door the eventually break. The quickest way is to check at the switch in drivers door for power. If thers none there check the wires. If thers power there go direct to the window motor and power it up and earth the other terminal if the motor is ok the window should operate. Good Luck.

May 08, 2015 | Isuzu Cars & Trucks

1 Answer

Why is ther no power at obd connection


Degrading of the wiring going to the OBD Connector ! Check the OBD by removing and cleaning contacts and also the earthing behind the passenger side footwell kick panel

Jun 05, 2014 | 2000 Land Rover Range Rover

1 Answer

Machine won't power on


check motor and pump for shorts to earth, replace motor controller. check for earth faults before reconnecting power.

Jul 18, 2013 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Hello, I have a Yamaha Dt125R, my bike is really sluggish and it splutters when I pull off, and 4th,5th and 6th gear have no power what so ever, if I manage to get into 4th gear, I have to shift down to...


Hi, Ryantanner20 and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
DT125 whys my bike so slow
HELP Yamaha DT125R seems to be tad slow
Yamaha DT125RE 2005 Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-dt

Jan 19, 2012 | 2005 Yamaha DT 125 RE

2 Answers

My jeep clicks when i turn the key on and will not start till it quits


If the battery is OK ,then it sounds like a faulty / intermittent Earth connection. Check all the battery power and earth leads where they connect to the Battery, Engine, Starter Motor and Body. If possible disconnect, clean thoroughly by removing any corrosion or paint that could cause a poor connection, and reconnect making sure all are tight.

Sep 29, 2010 | 1995 Jeep Wrangler

1 Answer

JUST PAID OVER $600 A MONTH AGO - NEW STARTER, BATTERY, IGNITION SWITCH, AND TUNE-UP - LEFT HOME, STOPPED AT MOM'S, GOT BACK IN 1998 JEEP WRANGLER - NOTHING! NO ATTEMPT AT STARTER, NO CLICKS, NO NOISE -...


Sounds like a faulty / intermittent Earth connection. Check all the battery and earth leads where they connect to the Battery, Engine, Starter Motor and Body. If possible disconnect, clean thoroughly by removing any corrosion or paint that could cause a poor connection, and reconnect making sure all are tight.

Sep 28, 2010 | 1998 Jeep Wrangler

1 Answer

My quad wont fire


The valve may be off a bit get the valve specs and check it usually the intake valve that causes that you will have compression but it it will stay open just enough that it won't start

Apr 17, 2010 | RTO 200cc Full Size Four Wheeler ATV

1 Answer

93 honda prelude dohc vtec engine will not can be push started


Sounds like you accidently pulled the thin wire from you starter motor. Look at the connections at the end of the solenoid, mounted on starter motor.The thick red wire is Battery + next to that connection is a smaller male push- on terminal, locate loose wire (thin) in the same area and reconnect to male push-on terminal on solenoid or check if earth cable between body/battery to engine wasnt removed in the process.Also some vehicles you have to engage the clutch before starting, check for a switch located on clutch pedal where master cylinder connects to clutch pedal (Is clutch switch mounted and wiring connected?)

Jan 03, 2009 | 1993 Honda Prelude

Not finding what you are looking for?
2000 Yamaha DT 125 R Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...