Question about 2003 Harley Davidson FLHT Electra Glide Standard
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Three quarts. Check the oil level with the bike on the side stand. The dipstick has two marks on it. The top mark is "Full Hot" and the lower mark is "Full Cold". Maintain the oil level between the two lines. Do not overfill.
Posted on Jul 05, 2010
SOURCE: I was looking for the
The engine oil capacity is three quarts with the filter change. The primary is 36-44 ounces. Stand the bike straight up as you can safely, remove the derby cover, and fill the primary case until the oil level is just to the bottom of the outer clutch shell. Do not overfill. The transmission holds 20-24 ounces. Check it using the dipstick with the bike standing straight up. As for the fork capacity, I do not know that information. There are two different quantities. One is a "wet" quantity to be put into the fork tubes when oil is simply drained from them and a "dry" quantity when you have disassembled the fork tubes for some reason. Your dealer will provide you with this information if you call them. I'm sorry that I don't have that information.
Posted on Jul 26, 2011
If you can turn the plug out, you can go to a large size plug. If you can't get the plug to come out, take the outer primary cover off allowing the oil to drain out as you remove the outer cover. Sure it's messy but you've got no choice. Now with the cover off, push down on the plug while trying to turn it out. It'll probably come out doing this. Then measure it and get the next size bigger. Tap the hole to the bigger size and install new plug. Good Luck!
Posted on Nov 19, 2009
Testimonial: "wish you had a p/n for the bigger size plug, that would be awesome."
SOURCE: 2003 flht, 95" upgrade, s&s
Timken Bearings are good but, I have experienced problems with the compensator itself so I would inspect that before a rebuild. Pay particular attention to the splines and check for wear before tightening. Hope this helps and saves some time and money
Posted on Mar 16, 2011
Tips for a great answer:
Mar 20, 2013 | 2001 Harley Davidson FLHTCUI Electra Glide...
Jul 20, 2012 | 2000 Harley Davidson FLHR-FLHRI Road king
Jun 23, 2012 | 2001 Harley Davidson FLHT Electra Glide...
Jun 02, 2012 | Harley Davidson Motorcycles
Apr 19, 2012 | 2003 Harley Davidson FLHT Electra Glide...
Jan 25, 2012 | 2001 Harley Davidson FLHT Electra Glide...
Jun 29, 2011 | 2000 Harley Davidson FLHT Electra Glide...
Jul 03, 2009 | 2002 Harley Davidson FLHT Electra Glide...
Sep 23, 2017 | Motorcycles
586 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: