Question about 2000 kawasaki VN 2000

Open Question

How do I remove the seat on a Kawasiki Vulcan 2000

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: remove the seat

First, remove the pillon seat behind the driver seat. Use a metric socket wrench to remove the mounting bolt at the back center of the pillon. Note the 'retaining strap' over the pillon. You can remove one of the side screws that hold this strap and swing it aside, but this is not absolutely necessary. Once the pillon mounting bolt is out, lift the pillon slightly and pull it to the rear. Be careful not to let metal parts scratch your rear fender. Now look at the hex socket bolts holding the driver seat to the rear fender. These are removed with a metric hex wrench (Allen wrench). Don't mess with these unless you can fit the bolt socket exactly. There should be a hex wrench in your Vulcan toolkit. When these have been removed, the driver seat can be lifted up and back to remove. It's a real mess under there, isn't it? To re-install, reverse the order of the above -- driver's seat goes in first, bolts secured and then the pillon. Don't force anything. If either seat is hanging up above its mounting position, you don't have the seat 'tongue' in its socket.

Posted on Nov 10, 2008

Ad
Jetskidoc
  • 72 Answers

SOURCE: how to remove seat on a 1999 vulcan classic 800cc

0c6b0a0.jpg
Sent you a picture explaining it

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove my mustang seat from my 2000 kawasaki vulcan 1500 classic?


On my Roadstar and my Triumph Thunderbird there is a bolt at the back of the pillion seat you remove, slid the pillion back and out then remove (2) allen head bolts from each side of the riders seat just under the edge of the seat. Slide the seat back and off. If you go to www.bikebandit.com they have a parts breakdown of most bikes and it will show the locations of the bolts and brackets. Good luck!

Dec 05, 2014 | 2000 kawasaki VN 1500 Vulcan Classic

1 Answer

How to remove the seat on a Kawasaki 750 Vulcan ?


I believe there are a couple of bolts inside the "toolbox" in the backrest that need to be removed before the seat will come off.

Apr 09, 2014 | 2004 kawasaki VN 750 Vulcan

1 Answer

How do you remove a Kawasaki 800 vulcan seat?


Remove the small bolt at the back of the passenger seat, and slide the the entire seat assembly back to release it from the hook-like bracket that secures it to the fender.

Aug 28, 2010 | 1996 kawasaki VN 800 Vulcan Classic

1 Answer

Need to remove the seat on my kawasaki voyager 1200 (2000)


http://fiche.worldofpowersports.com/wps/Kawasaki_OEM/KawasakiMC.asp?Type=13&A=313&B=59
this link will show you where the bolts are at so you can remove the seat. you will start at the back of the rear seat. after you remove the bolts from the rail ( # 130) you can side the seat up and back it will "pop" off. then your bolts from the rear of the rider seat left and back. now both seat are off.
Good luck
Mark
C.C. Motorsports

Mar 24, 2010 | 2000 kawasaki VN 1500 Vulcan Classic...

1 Answer

How to remove the seat from a Kawasaki 2005 Vulcan 800 Classic


BOLTS ON BOTH SIDES JUST BELOW SEAT REMOVE THEM THEN LIFT UP AND BACK SHOULD COME RIGHT OFF

Jan 30, 2010 | 2005 kawasaki VN 800 Vulcan Classic

1 Answer

How to remove seat of 2005 Vulcan 800?


one screw on the rear fender middle of the seat. grab seat in the middle and pull back and up.

Jan 01, 2010 | 2005 kawasaki VN 800 Vulcan Classic

2 Answers

Cannot remove the seat


yes the keys are for both , to release seat put pressure on seat then turn key

Oct 10, 2009 | 2000 kawasaki VN 2000

1 Answer

How do you remove plugs from 1500 vulcan


YOU NEED THE SPECIAL FACTORY TOOL SE OR A WOBBLY AND EXTENSION ON A RATCHET REMOVE SEAT COME IN FROM BETWEEN THE FRAME SEAT ARE AND GO FOR IT AND FROM THE FRONT SIDE THE SAME BUT MOST IMPORTANT YOU NEED A FLEXIBLE SPARK PLUG REMOVER

Jun 20, 2009 | 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

Just went to start after winter blowing gas out the air cleaner.


sounds like the needle and seat is not sealing.It is a common problem when bics are stored over winter.Either remove carb and clean nedle and seat or replace to be sure.

Mar 15, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

Not finding what you are looking for?
2000 kawasaki VN 2000 Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...