Question about Hartford VR 200X Motorcycles
No its not normal,,, for your questions..they are all linked so i will answer each of them together..
The oil resevior has a blockage,, this is what causes the back pressre sound as well as the spewing.. This will also account for why the oil didnt go in normally.. This is usually caused by 1 or 2 things...
1.) wen you were adding oil something got down there with it and jammed / semi- jammed the inside..
2.) the parts in the engine are shaving ,, this is when the outer coating begins to fall off which is normally caused by 1.) wrong oil type 2.) running the engine will little or no oil, particles in the oil..
Now with that siad,, get your self an engine treatment,, the kind that you pour into the engine, run it and it should dissolve the particles and free the system,, drain it then add new oil...
If that fails then you will need to replace the engine or have it serviced / repaired,, This involves taking it apart,, replaceing components and putting it backtogether... You can also run it as is unit it goes..
Posted on May 09, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ok need help with a
Great I've got you again
I just posted this comment
I asked as you said it 'backed up and sat in the reservoir'. do you mean the crankcase filler hole?
These engine are notorious for having to have the oil poured in very slowly as it has to go through a very small hole & they can easily overflow, it is normal for the level to go down when placed on side-stand
The oil coming out of the filler hole under pressure (with bubbles) is due to the crankcase pressurising, this is usually caused by one of two things
1. A kink or other restriction in the breather pipe; this can easily be pinched when putting the seat compartment back on or by wrong routing, it goes from the cylinder head to the air-box
2. The piston rings or cylinder bore are extremely worn & therefore let pressurised fuel mixture back into the crankcase
I think no.1 applies
I hope this answer is acceptable
I only meant to ask for clarification but must have posted it as a solution ( which you have rejected )
Posted on May 09, 2010
Tips for a great answer:
Jul 04, 2016 | Motorcycles
Dec 26, 2015 | Motorcycles
Apr 13, 2014 | 2007 Bajaj CT 100
Mar 22, 2014 | Bajaj Motorcycles
Feb 25, 2014 | Bajaj CT 100 Motorcycles
Jan 15, 2014 | Bajaj Motorcycles
Jan 11, 2014 | 2004 Bajaj Caliber 115
Jan 04, 2014 | Bajaj Motorcycles
Jun 30, 2013 | Benelli Motorcycles
May 08, 2010 | Hartford VR 200X Motorcycles
187 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: