Question about Borile B 500 CR Motorcycles

1 Answer

CAN SOMEONE PLEASE ANSWER MY QUESTIONS ok need help with a 150cc gy6 engine on a very strange issue please try to answer all questions and thanks in advance 1. ok when i drained the oil and went to add new oil on the center stand it would only take 10%of the oil?? then the next 10% would go in very very very slow and then it just backed up and sat in the resevior it would not go down???? 2. i put the scooter on its side kickstand and low and behold the oil went down it burped a little on its way in but it went in is this normal??? 3.i ran the engine for 10 min at idle the turned it off and immediatley went to remove the dipstick and there was a prssure sound like speewww and then oil spewed out of the resivor slowly with light bubbles in it? is that normal?? thanks so much for helping me i really apprecitae it

Posted by on

  • 1 more comment 
  • spahotel2518 May 09, 2010

    thanks man i appreciate is it safe to ride? and its brand new so i doubt **** is worn yeah theres a hose that goes from the cylnder head to the motor by the syntrifcul clutch agagin i apprecitae i just want to make sure its safe to ride it and its not hurting anything??? if you can answer that im done thanks

  • spahotel2518 May 09, 2010

    and i think you answered it the hose goes from the front cover to the engine in the sintficual clutch not the airbox

  • spahotel2518 May 09, 2010

    thanks to all that helped me with this problem it is fixed i drained the oil and blew it out with a air compressor and put it back and it took the oil beaautifully and no spewing out anyomre thenaks for all your help

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 440 Answers

Hi
Great I've got you again
I just posted this comment
I asked as you said it 'backed up and sat in the reservoir'. do you mean the crankcase filler hole?
These engine are notorious for having to have the oil poured in very slowly as it has to go through a very small hole & they can easily overflow, it is normal for the level to go down when placed on side-stand

The oil coming out of the filler hole under pressure (with bubbles) is due to the crankcase pressurising, this is usually caused by one of two things
1. A kink or other restriction in the breather pipe; this can easily be pinched when putting the seat compartment back on or by wrong routing, it goes from the cylinder head to the air-box
2. The piston rings or cylinder bore are extremely worn & therefore let pressurised fuel mixture back into the crankcase

I think no.1 applies

Ride Safe
Bike-Doc

I hope this answer is acceptable

Posted on May 09, 2010

  • steve May 09, 2010

    Hi
    There is another hose that goes from a breather attached to a bracket coming off the inlet rubber from the carb, it is sometimes kinked causing the same problem (bend the bracket or space with washers, or reinforce the tube with tape
    Do not ride the bike if there is pressure in the crankcase

    Ride Safe
    Bike-Doc


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Baja 5 wire stater/rectifier 150cc.Need wiring diagram w)colors!


Hi, Robin for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Wiring Diagram for Baja 150cc ATVs
How to wire GY6 scooter regulator rectifier and how it all worksPart http://www.jr-richscooterdoc.com/Help_electrical_explained.pdf

Dec 26, 2015 | Motorcycles

1 Answer

Kawasaki bajaj ct100


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.Kick Start Gear Aligment 150cc GY6
Kickstarter problems 150cc GY6 scooter
DOWNLOAD BAJAJ CT 100 SERVICE MANUAL
http://www.marutibajaj.com/pdf/ct100.pdf
Bajaj Auto Ct 100 2015 User Manual

Apr 13, 2014 | 2007 Bajaj CT 100

1 Answer

Clutch one way


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.Chinese Scooters CVT Transmission clutch belt and pulley inspection
Scooter CVT Transmission Full Service Inspection
GY6 150CC CV Belt Removal Clutch Replacement Springs
STEP BY STEP GY6 Variator Roller Replacement Tips
VARIATOR BASICS 101 DIO




Mar 22, 2014 | Bajaj Motorcycles

1 Answer

More noise in the engine


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.Tips On Troubleshooting GY6 Engine Noises
GY6 Scooter Troubleshooting Strange Engine Noise
DOWNLOAD BAJAJ CT 100 SERVICE MANUAL
http://www.marutibajaj.com/pdf/ct100.pdf
Bajaj Auto Ct 100 2015 User Manual

Feb 25, 2014 | Bajaj CT 100 Motorcycles

1 Answer

Engine noise


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.GY6 Scooter Troubleshooting Strange Engine Noise
Motorcycle Ticking Problem Fixed
Scooter engine knock 150cc GY6
DIY Gy6 Scooter 50cc to 100cc Kit
How to Install Big Bore Kit on 50cc Scooter Every Step Included 80cc or...




Jan 15, 2014 | Bajaj Motorcycles

1 Answer

How to do bour


Hi, Shsnmuk for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
How to install big bore kit on chinese scooter qmb139 gy6 Kymco Agility...
How to Install Big Bore Kit on 50cc Scooter Every Step Included 80cc or...
KYMCO 50CC SCOOTER 4 STROKE POWER UP KIT
INSTALLATION

GY6 150cc Top End Disassembly
http://second5boyish.sincerostranstornos.com/service-manual-2003-caliber-115_maaucew.pdf



Jan 11, 2014 | 2004 Bajaj Caliber 115

1 Answer

ENGINE LEAKAGE


Hi, Char for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
How to identify and repair leaks on your motorcycle
Scooter Oil Leak 150cc GY6
Diagnose Motorcycle Engine Leak Yamaha DT80 Enduro Part 7 Mysterious Leak
Oil Leak Kawasaki Ninja 250r Kick Stand Front Sprocket
Engine Crankcase Pressure and Engine Oil Leaks




Jan 04, 2014 | Bajaj Motorcycles

1 Answer

Scooter carb adjustment


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Scooter Moped Carburetor Adjustment
How to tune carburetor in GY6 chinese scooter 150 or 50 cc
Scooter Carburetor Idle Adjust
GY6 Enricher Automatic Choke Operation Testing
150cc GY6 Carburetor




Jun 30, 2013 | Benelli Motorcycles

1 Answer

CAN SOMEONE PLEASE ANSWER MY QUESTIONS ok need help with a 150cc gy6 engine on a very strange issue please try to answer all questions and thanks in advance 1. ok when i drained the oil and went to add new...


no its not normal,,, for your questions..they are all linked so i will answer each of them together..

The oil resevior has a blockage,, this is what causes the back pressre sound as well as the spewing.. This will also account for why the oil didnt go in normally.. This is usually caused by 1 or 2 things...

1.) wen you were adding oil something got down there with it and jammed / semi- jammed the inside..

2.) the parts in the engine are shaving ,, this is when the outer coating begins to fall off which is normally caused by 1.) wrong oil type 2.) running the engine will little or no oil, particles in the oil..

Now with that siad,, get your self an engine treatment,, the kind that you pour into the engine, run it and it should dissolve the particles and free the system,, drain it then add new oil...

If that fails then you will need to replace the engine or have it serviced / repaired,, This involves taking it apart,, replaceing components and putting it backtogether... You can also run it as is unit it goes..


May 09, 2010 | Hartford VR 200X Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Borile Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Borile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...