Question about Hartford VR 200X Motorcycles

1 Answer

Ok need help with a 150cc gy6 engine on a very strange issue please try to answer all questions and thanks in advance 1. ok when i drained the oil and went to add new oil on the center stand it would only take 10%of the oil?? then the next 10% would go in very very very slow and then it just backed up and sat in the resevior it would not go down???? 2. i put the scooter on its side kickstand and low and behold the oil went down it burped a little on its way in but it went in is this normal??? 3.i ran the engine for 10 min at idle the turned it off and immediatley went to remove the dipstick and there was a prssure sound like speewww and then oil spewed out of the resivor slowly with light bubbles in it? is that normal?? thanks so much for helping me i really apprecitae it

Posted by on

  • spahotel2518 May 08, 2010

    hi thanks for the answer is it normal for it to not accept oil on center stand but to acdept on kick stand? and also the oil spewing out like i said is weird but when i am checking oil level sir it says its not even full yet this motor is brand new first oil change any more insight please? is it safe to drive?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 440 Answers

Hi
Great I've got you again
I just posted this comment
I asked as you said it 'backed up and sat in the reservoir'. do you mean the crankcase filler hole?
These engine are notorious for having to have the oil poured in very slowly as it has to go through a very small hole & they can easily overflow, it is normal for the level to go down when placed on side-stand

The oil coming out of the filler hole under pressure (with bubbles) is due to the crankcase pressurising, this is usually caused by one of two things
1. A kink or other restriction in the breather pipe; this can easily be pinched when putting the seat compartment back on or by wrong routing, it goes from the cylinder head to the air-box
2. The piston rings or cylinder bore are extremely worn & therefore let pressurised fuel mixture back into the crankcase

I think no.1 applies

Ride Safe
Bike-Doc

I hope this answer is acceptable

I only meant to ask for clarification but must have posted it as a solution ( which you have rejected )

Posted on May 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gy6 150cc will only spark when you let off the ignition what might be wrong


Hi, Tucker usually it's a faulty ground somewhere in the ignition circuit for this scenario you will need your service manual wiring diagram. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
gy6 150cc wiring diagram Google Search
GY6 150cc Ignition Troubleshooting Guide No Spark BD Technical Center
GY6 Engine Wiring Diagram
http://www.firenzee.com/gy6/150cc%20Gy6%20QMJ157%20Scooter%20Repair%20and%20Service%20Manual.pdf

Jul 04, 2016 | Motorcycles

1 Answer

Scooty kristal oil drain


Hi, David for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Oil Change Guide 50 150cc Chinese GY6
Chinese Scooter Oil Change Scooter Focus All about Scooters
150cc GY6 oil change
Free Bajaj Motorcycle Service Manuals for download

May 26, 2016 | Motorcycles

1 Answer

Engine noise


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.GY6 Scooter Troubleshooting Strange Engine Noise
Motorcycle Ticking Problem Fixed
Scooter engine knock 150cc GY6
DIY Gy6 Scooter 50cc to 100cc Kit
How to Install Big Bore Kit on 50cc Scooter Every Step Included 80cc or...




Jan 15, 2014 | Bajaj Motorcycles

1 Answer

ENGINE LEAKAGE


Hi, Char for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
How to identify and repair leaks on your motorcycle
Scooter Oil Leak 150cc GY6
Diagnose Motorcycle Engine Leak Yamaha DT80 Enduro Part 7 Mysterious Leak
Oil Leak Kawasaki Ninja 250r Kick Stand Front Sprocket
Engine Crankcase Pressure and Engine Oil Leaks




Jan 04, 2014 | Bajaj Motorcycles

1 Answer

What is bajaj discover 100 front fork oil capacity?


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.How to service GY6 150cc scooter forks
Tech Lesson 8 Changing Suspension Oil Part 1
Bajaj Discover 100T 2014 service manual DOWNLOAD FREE FULLMANUALS COM
Discover 125ST 100T SPC
Bajaj Auto Discover 100t Disc User Manual

Feb 21, 2013 | 2011 Bajaj Discover 100

1 Answer

2011 Honda Activa oil drain plug location


Hi, Skamin92 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2011 Honda Activa oil drain plug location Google Search
How to change Engine oil on 2012 Honda Activa 110 CC
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda activa 2009 Owner Manual

Aug 20, 2011 | 2011 Honda Activa

1 Answer

CAN SOMEONE PLEASE ANSWER MY QUESTIONS ok need help with a 150cc gy6 engine on a very strange issue please try to answer all questions and thanks in advance 1. ok when i drained the oil and went to add new...


no its not normal,,, for your questions..they are all linked so i will answer each of them together..

The oil resevior has a blockage,, this is what causes the back pressre sound as well as the spewing.. This will also account for why the oil didnt go in normally.. This is usually caused by 1 or 2 things...

1.) wen you were adding oil something got down there with it and jammed / semi- jammed the inside..

2.) the parts in the engine are shaving ,, this is when the outer coating begins to fall off which is normally caused by 1.) wrong oil type 2.) running the engine will little or no oil, particles in the oil..

Now with that siad,, get your self an engine treatment,, the kind that you pour into the engine, run it and it should dissolve the particles and free the system,, drain it then add new oil...

If that fails then you will need to replace the engine or have it serviced / repaired,, This involves taking it apart,, replaceing components and putting it backtogether... You can also run it as is unit it goes..


May 09, 2010 | Hartford VR 200X Motorcycles

1 Answer

Wich sae number suspension oil, and quantity requires the benelli adiva 150c.c. 2003? It mounts a ceriani 33mm front fork.


Hi, Lyobaapere for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
FRONT FORK SCOOTER 50CC
How to service GY6 150cc scooter forks
Tech Lesson 8 Changing Suspension Oil Part 1
Havocware com How To Accurately fill your motorcycle fork tubes with oil
adiva 125 manual pdf 1 srdt sotite com



May 12, 2009 | 2008 Benelli Velvet 150

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hartford Experts

yadayada
yadayada

Level 3 Expert

78238 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Brad Brown

Level 3 Expert

16973 Answers

Are you a Hartford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...