Question about 1994 Suzuki RF 900 R

2 Answers

How do I check to see if fuel pump is working ? Im not getting fuel to carb

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Check your fuel pump on the RF by taking off the tank, disconnecting the fuel pump inlets from the tank reserve tap, disconnecting the inlet pipe to your carbs. Direct the carb inlet pipe into an empty coke bottle and turn on your ignition, you might need to thumb the starter. Fuel should come out. When the small amount of fuel in the fuel pump inlets has been pumped through you'll hear the now empty pump clicking loudly. If the above is true it's working.

Posted on Aug 26, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

What Fuel Pump? Really?haha

Posted on May 08, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: i have a 2000 suzuki marauder vz800. the front

This is a common problem with vz800 models, I had the very same problem front ran lean and rear ran rich. I would advice you to do the following strong. change the frot jet to 130 rear to 135 and both needles should be 3rd from the top. it's not your fuel pump it rarely goes bad.If there is back firing then turn the carb. screw out by 31/2 turns. hope this helps. PS: it is not your petcock, nor your fuel pump. One advice have you gas tank cleaned and line it with POR only it is a good product.

Posted on Aug 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im having running problem i've clean the carbs, check compression, checked spark, checked vacuum hose, and air/fuel srew and it still will not start any suggestion


Undo your carb bowl bleed screws to make sure you are getting fuel, then retighten. If you have fuel from the bowl, that just tells you that you have fuel in the bowls. If no fuel check two things, that your fuel cock is working. If it is a simple gravity device it is possible that your petcock is clogged. If vacuum operated check your vacuum lines for splits and cracks. If it is an electric pump, check for pump operation when first turning on the key. You should hear it priming, then stop. If it doesn\'t do this, check your fuel pump fuse, and replace with a known good one of the same rating. Failing this, it will most likely be a dud fuel pump.

May 29, 2014 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

My truck is sputtering


Your timing could be off.

Aug 31, 2012 | Cars & Trucks

1 Answer

I have a 1983 Ford F-100. v8 5.0 liter. Ive replaced all spark plugs n wires, changed the fuel filter and fuel pump. My carburator has been rebuilt. My problem im having is my truck will not turn on unless...


This sounds like the carb is not set correctly and you are not getting the proper amount of fuel to get the vehicle to start. I would say that the carb needs adjusting further to get it all to work correctly.

May 30, 2011 | Ford F-100 Cars & Trucks

2 Answers

Have a 08 sportsman 500 HO. Can get gas to fuel pump but not to carb. Cleaned carb wtih carb cleaner, put back together and it fired for a second.( leftover carb cleaner I'm sure) Tried to start...


I was just working on an 08. They have a vacuum operated fuel pump. All of the dealers I spoke with said that a fuel pump going bad is uncommon. I would check to see if the vacuum line is craked. When you take the inlet gas line from the carb and turn it over, you should get a pulsating flow of fuel. Again, check vacuum hose first then assume the fuel pump.

Jan 27, 2011 | Polaris ATV

2 Answers

I can't get the bike to start , and nd the carb.


have u tryed out the batery? try a new one if u don't know how old it is

Jun 04, 2010 | 1991 Yamaha FZR 600

2 Answers

49cc Pocket Bike Carburetor Won't Draw Fuel


first off, are you getting fuel to bulb? if not are you sure the lines aren't on carb backwards. if you are getting fuel to bulb and won't run then here's what i'de check. how's the compression, may not be making enough vacuum to draw fuel, have you removed the mixture screws and blown out passages, there is a little sreen under diaghram in some of those little carbs that gets clogged, carb base gasket?

May 08, 2010 | RC Xrc Gas Rc Car Scooter

1 Answer

Can you access the fuel pump without removing tank? Im not getting fuel to the carb. I checked the lines to the fuel filter to carb and from fuel filter to the tank and seems clear. The only thing I can...


If you have a carburetor, you have a mechanical fuel pump on the engine. If you have a throttle body injection your pump is in the tank and the tank needs to be removed to get at it. Before dropping tank make sure the pump is getting power and a good ground.

Oct 01, 2009 | 1988 Chevrolet Suburban

2 Answers

Not getting any fuel to thottle body


1st i would like to ask, is your car a carburetor type engine or an electronic fuel injected. if you have a carburetor and assuming your fuel pump is working properly, you may have a clog carburetor. just clean it and better replace your carburetor gasket and repair kit. this job is not a DIY, let an expert do it for you. if you have an electronic fuel injection, its more complicated situation coz EFI system are controlled by an ECM electronic control module. have your vehicle service by an autorize auto repair shop tha uses a scan tool or diagnostic tool to find fix the problem.

Jun 14, 2009 | 1995 Pontiac Grand Am

Not finding what you are looking for?
1994 Suzuki RF 900 R Logo

Related Topics:

892 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...