Question about 2002 Gas Gas EC 400 FSE

Open Question

Were can i get parts like panels an engine 4 my gas gas 400 fse?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi i have a 2002 gas gas fse 450 replaced starter motor bushes and sprag clutch and battery. and it wont start when i kick the bike over the engine feels tigh is it because the engine has not been started...

it could be your starter cluch draging take it off again and check it out or you will burn out the starter trying to start the engine if all is well there put a fuw drops of engine oil into the pot down the spark plug hole and try kicking the bike over without a plug in it till it frees off

Jan 23, 2010 | 2005 Gas Gas SM 450 FSE

2 Answers

Spark plug type recomendations.

factory possibly upgraded to irradium there the bestest

Oct 18, 2009 | 2003 Gas Gas EC 400 FSE

1 Answer

I cant seem to get a spark all wires are correct and is earthed there is power comming from the battery as all lights work ht lead and spark plug are fine as i have tested these on another motorcycle just...

This could be caused by a defective kill switch. With the lights on operate the kill switch. Do the lights dim slightly? If they don't the kil switch is probably at fault. If not, I don't know what it could be!

Apr 13, 2009 | 2002 Gas Gas EC 400 FSE

1 Answer

Electrical problem

Check that the positive and negative terminals have not been mixed up

Jan 31, 2009 | 2003 Gas Gas EC 400 FSE Supermotard

1 Answer

Gas gas 450 fse 2005 lcd spedo turning off when cold outside

I have encountered this on more than one occasion. My experience has been a solder joint on the internal circuit board that is non conducive to cold weather. It has something to do with shrinkage on the board. Although I have only been able to track the exact problem one time, (a small crack in the panel board), all other times I have had to replace the actual unit.

Dec 15, 2008 | 2006 Gas Gas EC 450 FSE

1 Answer

Oil Filter

or if it's an exclusive part used only on this motor?Honda XR400 Oil filter is the same.,

Nov 10, 2008 | 2005 Gas Gas SM 450 FSE

1 Answer

Screen cleaning

of course). There is nothing mentioned of this in the service manual. The workshop manual says 'clean' when you are reassembling the engine after a complete teardown. I don't do that very often . There's no risk things fall apart when loosing the cover?Yes just undo the plug on the side near gear selector. Be careful with screen as it is plastic and has o-rings to seal it. Clean with degreaser works best I feel. Reassemble putting screen fully in first then carefully screwing plug back in.,

Nov 10, 2008 | 2002 Gas Gas EC 400 FSE Supermotard

2 Answers

Running prob

The only issues I have had with my '02 Fse400 running wise have been with the charging circuit and only because of loose/broken wires. They run terribly if they don't have proper (14.4v) voltage. At the end of the day they are just another motorcycle if your dealer can't fix it find a better mechanic.,,,

Nov 10, 2008 | 2002 Gas Gas EC 400 FSE

Not finding what you are looking for?
2002 Gas Gas EC 400 FSE Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4825 Answers

Gene Tuck

Level 2 Expert

248 Answers

Kim Halliwell

Level 2 Expert

35 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides