Question about Hartford VR 200X Motorcycles

2 Answers

Ok i need help i just put a brand new gy6 motor in my chineese scooter i need help knowning how i should break it in some say ride it hard fron the start ride it like you will all the time some say nurse it for 1000 miles can anyone tell me what to really do??? and what kind of oil should i use? thanks a million

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,200 Answers

Hi,

Congratualtions on your purchase!

Firstly the recommended oil for this engine is 10/40 weight.

I can give the following advice as your engine is new:

Change Oil Every 200 Miles till 600 miles are up. DO NOT full throttle the engine until at least 1000 miles are up.

After 600 miles are up you can change the oil every 500 Miles. Frequent oil changes are an absolute MUST with this engine.

This is the recommended break in procedure for this engine.

Hope this helps. Thanks for using FixYa.

Posted on May 08, 2010

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,851 Answers

Keep the bike well within EASY specifications. NO HARD RIDING. The best you can do is also keep it reasonable driving. This machine was put together with humans too so you want to test the bike out for 800 miles or so. Less is ok if you must go a little faster but you will find it well to your advantage to after 100 miles or so - test the limits gingerly. When a race engine is built there is always a break in period so respect that and have fun without hurting your very expensive investment. Best of it Garyok i need help i - 71671ea.jpg

Posted on May 08, 2010

  • Gary Rice
    Gary Rice May 08, 2010

    I see you rejected my advice to go with a brake in period of at least 100 milers and up 1000 without going the top speed. Is there something else you want to know but that I some how missed?
    Thanks - Gary



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SUPERBYKE POWERBAND R50 Where can I locate the battery on this bike ?


Hi, Corbet your scooter falls in the CCGS class of scooters because there are at least 100 different brand names of the Classic Chinese Generic Scooter which all have the same body style and mostly run the 50cc-250cc Honda GY6 engines which mean's you can literally go to any shop that works on scooters for parts and repairs. This brings me to the main part of this answer, only the top 10 scooter manufacturers have service-parts-owners manuals that are easily available, CCGS scooters have no manuals available except for the occasional user guide so if I give you a link to a manual of a different brand name, despair not, for it will contain 99% of what you need or are looking for, regarding repairs or maintenance. For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
battery removal
Kymco People 200 Scooter Battery Replacement How To
http://scooterunderground.ca/knowledge/manuals/documents/Metro_50_service_manual.pdf
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
Scooter Engines GY6 2 4 stroke 50cc 150cc PartsForScooters com
http://www.scooterloungeonline.com/files/1669893/uploaded/BuddyOwnersManual.pdf

Mar 02, 2017 | Motorcycles

1 Answer

150cc stator


Chinese Junk I am sorry to say. All made as cheaply as possible.

ROKETA MC-19 STATOR

www.roketapartsdept.com/products/ROKETA_MC_19_STATOR-16828-579.html
  1. Cached
Part# MC-19-150-06-01-09. Roketa MC-19-150 Replacement part. May Fit Other Makes and Models.

MC-19 ENGINE PARTS: Roketa Parts Department

www.roketapartsdept.com/catalog/MC_19_ENGINE_PARTS-579-1.html
  1. Cached
ROKETA MC-19 BREATHER HOSE CONNECT. Product ID ... ROKETA MC-19 ENGINE OUTPUT SHAFT. Product ID ... ROKETA MC-19 STATOR. Product ID ...

Roketa 150: Parts & Accessories ' eBay

www.ebay.com/bhp/roketa-150
  1. Cached
  2. Similar
Find great deals on eBay for Roketa 150 in Scooter Parts. ... MAGNETO STATOR 8 COIL POLE GY6 125cc 150cc SCOOTER ATV GO KART ROKETA TAOTAO ...

Roketa Scooter Parts - All Street Brands - Monster Scooter Parts

www.monsterscooterparts.com/scooterparts/street-brands/roketa
  1. Cached
Roketa MC-16T-150 Scooter Parts. Roketa MC-17-50 (Sicily 50) Scooter Parts. Roketa MC-17-150 (Sicily 150) Scooter Parts. Roketa MC-19-150 Scooter Parts.

Roketa MC-07-150 (Bahama 150) Scooter Parts - Monster Scooter Parts

www.monsterscooterparts.com/scooterparts/street-brands/roketa/roketamc07150
  1. Cached
Items 1 - 6 of 6 - 8 Coil Magneto Stator with 3+2 Wiring Connector for 125cc GY6 152QMI & 150cc GY6 ... 19 99. G07-1459. Medium Weatherproof Cover for Roketa Scooters ... Quality replacement parts for the Roketa MC-07-150 scooter.

Roketa Scooter Parts - Chinese Parts

www.motopartsmax.com > Roketa Parts
  1. Cached
  2. Similar
Roketa Scooter Parts By Type ... Air Filters & Intake (19) · Intake Pipes & Water Pipes · Air Filters · more · Cables (16) ... Roketa MC-19-150. Parts List · MC-20-150. Missing: stators

And TAO TAO

tao tao powermax Google Search

Dec 29, 2016 | Motorcycles

1 Answer

Starter motor location in 2010 Hero Honda Pleasure 100


Hi, Eskay for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to Replace Starter Motor on 150cc GY6 Scooter
GY6 150CC Starter Removal Repair New Brushes Custom Oil Seal
How to diagnose and recognise starter motor problems
http://www.manualslib.com/manual/819966/Honda-Motorcycle.html#product-Motor Scooter


Aug 04, 2016 | Honda Motorcycles

1 Answer

Have no spark to plug found a 2 wire clip with the same colors at the battery area that is not connected to anything. dont know where to connect trouble finding manuals or video


My scooter has no spark how to fix. gy6 chinese ... - YouTube

? 2:29
https://www.youtube.com/watch?v=UU4S0Ov9q4c
Aug 24, 2012 - Uploaded by Rolling Wrench
Purchase our "NO SPARK KIT" click the link below: ... Myscooter has no spark how to fix. gy6 chinese scooter 139qmb qmb139 50cc 150cc .... i have a 2003 panterra fusion scooter with a 49cc motor,i just purchased a new cdi box,new coil wire and a new stator and ... Put gas in it tried it again nothing.Missing: rto

RTO 150cc scooter no spark Questions & Answers - Fixya

www.fixya.com/tags/150cc_scooter_no_spark/browse/rto
Ask your RTO 150cc scooter no spark questions. Get free help, advice & support from top RTO experts. ... no spark. Ad. Question about Gas Motor Scooter 150cc.

Nov 29, 2015 | RTO 150cc Gas Motor Scooter

1 Answer

When my cpi aragon gp 50cc is started there is a rattling noisecoming fron sum where near my feet


Hi, Tiddy_09 I just loaned my brand new pair of listening ears to your local dealers chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. For more information about your issue and free downloads that you need please visit the websites below. Good luck and have nice a day.
Rattling noise coming from my scooter
GY6 rattling noise
http://www.garage24.se/Catalogs/CPI/Servicemanual/Verkstads%20manual%20CPI%20Skoter.pdf
CPI Scooter Parts Racing Planet USA
https://absolutelyscooters.net/Omanuals/CPI%20ARAGON%20125%20USER'S%20GUIDE.pdf

Jun 24, 2011 | 2009 Cpi Aragon GP 50

1 Answer

What are the signs of a gy6 engine chineese version overheating?


Hi,

This product poses a risk of fire because there is a potential for battery overheating caused by a high resistance connection. Overheating may cause damage to the battery packs and possibly the scooter, which could result in a potential fire hazard.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

May 13, 2010 | Hartford VR 200X Motorcycles

1 Answer

Ok i ut a brand new gy6 motor in my scooter it comes with that break in oil or shipping oil in it it says i need to change the oil at 300 miles ive heard from others dont even run it with that **** oil in...


You do not want to use the oil that is in it when shipped. That oil does not give enough lubercation. If you do use it you will be taking life away from the motor.

Good Luck

May 07, 2010 | Hartford VR 200H Motorcycles

1 Answer

Intermittent not starting Vento motor scooter...


You have what thay call a GY6 Motor it'sa honda knock off clone Chances are you eather need a CDI box Or Coil both prety cheep you have no points or condsider on this bike i have the same motor go to www.scootdawg.com form for for all the info you need including how to test them. one other thing check you valcume hoses and fule filter as well

Dec 29, 2009 | 2006 Vento V Thunder XL

3 Answers

Extreme scooters vintage xm155


If the bike has knobby type (bumpy tread) they do make noise.Just be sure they have the correct air pressure in them.
Try to support the bike so you can manually spin the wheels like if the bike had a center stand.Feel while turning, to see if the wheels feel to tight or loose.And try to feel any play in the wheels. Or hear any stange noise.
While your are at it go ahead a drain the oil and change it with a good quality oil. The bike should have come with a book to tell you what type oil it wants.Dont be afraid to change the oil more than it is suppost to be.They dont hold that much oil and the shifting of the gears will generate alot of break in metal dust that needs to come out of the engine.
To say if you made a mistake in buying the bike remains to be seen because their is no history of the Chinese bikes in this country.
If I could ride the bike I could give you a better opinion.
Another thing you could do is, while riding the bike with it makeing the sound,pull in the clutch and put it in neutral.Is the feeling gone?
This can help to be sure the noise is not engine generated.

Nov 04, 2009 | 2004 Derbi Senda SM 125 4T

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hartford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Brad Brown

Level 3 Expert

16621 Answers

Are you a Hartford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...