Question about 2002 Harley Davidson FLSTC - FLSTCI Heritage Classic

1 Answer

No Power to 2002 Heritage Passing Lights. All fuses in fuse box are good

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 126 Answers

Check to make sure power is coming into fuse box and then at turn switch. Keep progressing toward lights checking wires for breaks or grounds. Pay particular attention to connections at fuse box and both sides of switch. When you reach a spot with no power trace back.

Posted on May 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I cut rear tail lights wire on 1997 Harley Davidson heritage classic grounded out wires now can't find fuses under seat now rear light or brake lights don't work. Could fuses be under dash can't find...

Hi Randy, the fuses are located right behind the battery underneath a black plastic box like cover that slides right off when you pull up on it. Good luck

Mar 05, 2015 | Harley Davidson Motorcycles

1 Answer

I have a 2002 HD fatboy that is not getting power to the ignition, no lights. Battery is good all wiring good, fuses are good but no power in fuse box to ignition or light fuses.

Have a look at the main fuse, it has to be the problem. You could take out the fuse & connect the terminals together using a piece of wire, that'll tell you if the fuse is the problem.

Jan 25, 2015 | Motorcycles

1 Answer

Brake lights not working club

Need to check the Intergrated Power Module (fuse box) and/or the FCM (body control module attached to the fuse box) They have a terrible design and are not weather-proofed from the underneath where the harnesses plug in and water corrodes the circuit board on the fuse box...

Dec 29, 2013 | Thule 2002 Dodge Dakota - Quad Cab,...

1 Answer

Where is fuse box located on 1994 heritage

Hi Anonymous, remove seat and directly behind the battery is a black plastic box. The cover slides up and off revealing the starter relay and the system/fuel pump relay for you injected folks and the various assorted circuit fuses. Good luck

Oct 09, 2013 | 2002 Harley Davidson FLSTC - FLSTCI...

1 Answer

2002 ford taurus, no power to ignition or accessories

you say power is present at fuse box....the dashboard one or engine compartment? Does sound like a fuse. Knife blade fuses are best checked with a meter or test lamp as they can appear good on inspection

May 29, 2012 | 2002 Ford Taurus

1 Answer

Where is the fuse box on 02 flstc tha only lights that are working is brake lights and turn signals

Have you looked under the seat? That's about the only place on a Softail to put a fuse box. I'm not familiar with this late model.

Good Luck

Apr 27, 2011 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

I have 2005 softail as listed,was bought used,someone replaced front forks due to being in accident.the only thing not working is front running and turn signal lights. Passing lights work,headlight works....

No, the TSM does not have this function in it. It controls nothing but the turn signals. Whoever wired the passing lights in used the wire for the high beam light as a power wire for the passing lights. This was probably done so that they would not overload the charging system. If you have the high beam light and the passing lights on, it's a tremendous draw on the charging system and it may have caused a fuse to blow. So, they probably wired the passing lights to operate without the high beam light. I think the wire is white for the high beam.

Good Luck

Apr 11, 2011 | Harley Davidson FLSTC - FLSTCI Heritage...

1 Answer

Lost all electrical power. Battery is good. Is there a main fuse or breaker. The only lights that come on are the dash lights and the small light on the front fender.

If the main fuse blows, nothing works. Not even the dash lights. Look under the seat for the fuse box. Once you find which fuse is blown, then you can trace out that circuit.

Ride safe

Jan 01, 2011 | 2002 Harley Davidson FLSTS Heritage...

1 Answer

Ford 2001 excort zx2

Just check the fuse box for busted fuses. They are properly labelled as headlights, park lights, etc..
Also check the wirings for short circuited lines. Further-
more check the bulbs, if these are still ok.

Nov 21, 2009 | 2002 Ford ZX2

Not finding what you are looking for?
2002 Harley Davidson FLSTC - FLSTCI Heritage  Classic Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers


Level 3 Expert

4340 Answers


Level 3 Expert

76630 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides