Question about 2004 Honda GL 1800 Gold Wing

1 Answer

The radio only working now & then, the LCD radio display works sometimes when the radio is playing & sometimes not at all. Seems to hold station memory. Any help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Sounds like a loose connection on the ribbon cable or dirty pin connections where the faceplate and main deck connect. A heated or loose solder joint on capacitor or I/C can also do this but I would take faceplate off and clean connections with rubbing alcohol and cotton swab first, then check for any loose solder joints or bent connections

Posted on May 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio has power the display button works but radio will not play


You either have a blown speaker or the amplifier in the radio has gone bad. Sometimes a blown speaker will act as an additional ground thus grounding out the radios internal amp. Check your speaker by hooking them to an external audio source. If you do have a blown speaker once it is removed all working speakers should play. Speakers should be replaced in pairs. If they all work its the radio itself. It will need to be replaced.

Apr 17, 2016 | Car Audio & Video

1 Answer

2009 Camry. Radio display scrambled, but then seems to fix itself. When scrambled sometimes the display disappears altogether. Whe scrambled I can't change channels with preset buttons. Btw, my outside...


just the internal display.
that means radio is bed. if sound holds and stations hold and sound good.
my gosh, both died same day?
check fuses first. as always for ever and ever.

try to say what works good or bad on the radio in all modes.
all modes. Am/fm cd or ? usb port, if optied
is radio stock? oem original, lock box stock.?

Jan 31, 2015 | 2009 Toyota Camry XLE V6

1 Answer

Ic706mk2g front panel blank display, no backlight, set working ok via ham radio deluxe, but cannot access menu.


in order to access the menu you have to push & hold "display" for 2 seconds
& to get to the real menu hold this down while powering on the radio
not sure what one you need

Dec 25, 2013 | Icom Radio Communications

1 Answer

I need the user manual for an alarm clock called clok. I can't set the time or radio stations


These steps will only work while your unit is OFF. The power button is located at the top left face of the unit.

How to set time?

1. With the unit OFF, press and hold down the Clock/Display/Play/Pause button for at least 5 seconds.
2. While still holding the Clock/Display/Play/Pause button, press the Hour, and then the Minute button to adjust the hour and the minute on the time.
3. After selecting the correct hour and minute time, release the Clock/Display/Play/Pause button to set the clock.

How to set the alarm?
1. With the unit OFF, press and hold down the AL1 or AL2 button for at least 5 seconds. (an alarm icon will flash on the lcd display)
2. While still holding down the AL1 or AL2 button, press the Hour and the Minute button o adjust the hour and minute on the alarm time.
3. After selecting the correct time for alarm, release the AL1 or AL2 button to set the Alarm time.
4. Press the AL1 or AL2 button consecutively to switch alarm one and alarm two between sounding to a buzzer, the currently set radio or a docked iPod.

Apr 17, 2011 | Audio Players & Recorders

1 Answer

My monitor has started going black at times. If I hold down the power button, I can turn off the computer and when I reboot the monitor seems fine and I can view everything and work. Sometimes the screen...


Please try to attach an external monitor & see if you can get any display on it. If you can get display on an external monitor, then the root cause of the problems you have might be either a failing LCD backlight or a failing inverter board.

Please refer to the following article for more details on how to diagnose & troubleshoot LCD backlight & inverter board issues:

http://www.fixya.com/support/r6430776-troubleshooting_laptop_power_failures

Dec 08, 2010 | Toshiba Satellite A100-S8111TD Notebook

2 Answers

Bose radio display doesn't show at all


I just posted a similar problem and did 2 more minutes of research on this site to figure it out. Hold down the 'cd mode' and press the on/off button. This turns the display on or off.

Jan 21, 2009 | Bose Wave Radio

1 Answer

Radio LCD readout


the LCD is back-lighted by a tiny bulb inside the radio chassis, pull the radio out, remove the sheet metal top cover, you will see a small twist in/out bulb socket at the rear of the radio display screen, remove it, take the bulb to a good full service parts store like NAPA or the dealer, the bulb is about $2.

Jan 07, 2009 | 1997 Jeep Grand Cherokee

2 Answers

2004 RX8 electric system


The radio screws holding the radio are not tight enough. to eliminate this problem remove the radio and adjust the pressure screw in the rear of the radio so it comes out farther>. if the radio is not far enough in the compartment to push in that button the radio controls will not work

Jun 12, 2008 | 2004 Mazda RX-8

2 Answers

Music playing


If your phone does not have a dedicated Music button it is usually the HOLD button. Try the hold button first (with the phone hung up) if that does not work look for a button labeled music or possibly a soft key (key's labeled by an LCD display)

Aug 27, 2007 | Panasonic KX-T7730 Corded Phone

1 Answer

No output when I play a CD


what kind of vehicle do you have? i am going to guess your vehicle has a stock amp that it uses to power your speakers? you will have to hook up the remote wire for the amp to the wire that powers the amp in your vehicle (the stock amp) right now it seems like you have the "power antenna" wire hooked up to the stock amp in your vehicle.

Aug 24, 2007 | Eclipse CD7000 CD Player

Not finding what you are looking for?
2004 Honda GL 1800 Gold Wing Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Mike

Level 3 Expert

4339 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...