Question about 2005 Harley Davidson FLHRS - FLHRSI Road King Custom

1 Answer

Where do I enter the 5 digit deactivation code to unlock my bike?

I think that my keychain control is having trouble unlocking the anti-theft device on my bike, (Due to battery drainage/battery has since been changed). I got the unlock code from the dealer but I do not know where/how to enter the 5 digit number. Can you help?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 194 Answers

Turn the ignition key on and immediately hold down both turn signal buttons until 5 dashes appear in the odometer window, then release both buttons. Enter the first digit of the 5 digit security code, or PIN code, by pressing the left turn signal button - if the first number is 3, press the left turn button three times. Press the right turn signal button once to go to the next number and continue until the code is entered then press the right turn signal button once more. That's it. Don't mess up more than three times, though - I have heard it can create major issues, so be cautious.

I hope this is what you were looking for.

Posted on May 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought 2002 Saturn L100 owner said radio worked before they took battery out to charge it. Now all the lights work but the sound wont come out. Help


Sounds like you need to input the radio code . i would look in the glove box for the code either on a sticker or a card or ask them if they know about the code .

Instructions
Deactivate Theft-Deterrent Feature
  • 1
    Place the key in the ignition and switch it to the "RUN" setting.

  • 2
    Press the volume control knob in to turn the stereo off, if it is not already off.

  • 3
    Press the number "5" and "6" button on the radio simultaneously for approximately five seconds until four dashes ("- - - -") appear on the display screen. You must then enter the four-digit unlock code that you originally assigned to your vehicle. If you are unsure of the unlock code, contact your local GM retailer.

  • 4
    Press "SEEK/SCAN" upward to set the first number.

  • 5
    Press "SEEK/SCAN" downward to set the second number.

  • 6
    Press "TUNE" upward to set the third number.

  • 7
    Press "TUNE" downward to set the fourth number.

  • 8
    Verify that the code on the display screen matches your stereo unlock code, then press the AM FM button. You will see "REP" will display on the screen. Enter your code a second time for confirmation. "OFF" will appear on the screen, confirming you successfully deactivated the theft-deterrent feature.

Nov 05, 2013 | Scosche Industries 08-up Saturn Astra...

2 Answers

At&t lg prime gs390 free unlock codes


Hi,
Please see below instructions in details on how to unlock code for LG phones, (i have included various model of LG for you to try)


Here are some unlock codes for AT&T LG phone available, menawhile , including the methods of entering the Unlock Code on your LG phones attached to them. Hope this is useful. AT&T cell phone Questions&Answetrs
Model : AT&T LG VU CU915 & CU920
1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM 2. Enter *#865625# then the 16 digit unlock code 3. Device should say: Network Lock Deactivated 4. Phone may automatically reboot and is now unlocked !
Model :AT&T LG C2000
Insert non-Cingular SIM card Power on the handset - phone will display "phone restricted" Select "Cancel" - phone will display "phone restriction code" Enter the SIM Unlock code. Select "OK" - the handset is now successfully unlocked
Model : LG TU720 - LG CU720 and all LG Shine SERIES
1) Power ON your phone with an accepted SIM card 2) Type *#865625#UNLOCK CODE 3) Press OK 4) Device is now unlocked
Model : LG CE110
1) Put a non AT&T or Cingular SIM in the phone; 2) The phone display: Invalid Smart Chip 3) Power on handset 4) Select "Cancel" - phone displays "phone restriction code" 5) Enter the unlock code (8 digit code*) 6) Select "OK'" - the handset is successfully unlocked
Model : LG CU400
1 - Insert non-Cingular SIM card" 2 - Power on the handset - Phone will display "Invalid SmartChip" 3 - Phone will display "Invalid SmartChip" 4 - Enter 159753#*# 5 - Enter the 8 digit SIM Unlock code 6 - Select "OK" 7 - The handset is now successfully unlocked
Model : LG CU500
1 - Insert non-Cingular SIM card" 2 - Power on the handset - Phone will display "Invalid SmartChip" (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN) 3 - In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5 4 - Enter the 8 digit SIM Unlock code 5 - Select "OK" 6 - The handset is now successfully unlocked
How to Unlock LG CU515:
1-Insert non-Cingular SIM card" 2-Power on the handset - Phone will display "Invalid SmartChip". 3-Enter *#865625# then select option 1 and then again select 1 4-Enter the 16 digit SIM Unlock code 5-Device should say: Network Lock Deactivated 6-The handset is unlocked. 7-How to Enter Unlock Codes on CU575 (Trax) How to Enter Unlock Codes on LG F2250:
1-With allowed sim card in the start menu type: 2945#*3311#. 2-Handset shows saved, then return to startup screen 3-Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' 4-Enter your unlock code and OK. How to Enter Unlock Codes on LG U8110:
1-With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*# 2-Select 'Sim Unlock' menu # 3-Enter NCK code then validate 4-Your phone is now unlocked. How to Enter Unlock Codes on LG U8210:
1-With a not allowed sim card enter Pin code then validate, type: 277634#*# 2-Shows test menu 3-Choose sim test menu and type: 2945#*#, choose Sim Unlock menu 4-Handset shows 'Enter NCK' 5-Enter code, then hit OK. How to Enter Unlock Codes on LG U81xx:
1-To bring up the unlock menu on the phone with a SIM card, type 2945#*88110# 2-Enter the code 3-In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#. If your cell phone is not listed, please follow instructions for LG C2000 above

If If instruction above does not help you i would strogly suggest to contact your Service Provider to provide some alternatives.


Thank you for using fixya
Please rate me and give testimonials if ever to continue my assistance




lg-phones

Jun 03, 2011 | LG Cell Phones

1 Answer

I want to unlock my LG GR500, can you help?


Welcome to Fixya

Try this torubleshooting procedure

1. After turning on your mobile phone, press: *#865625#
2. Press Yes to continue.
3. Enter the 16 digit Subsidy Unlock Code
4. Enter the 16 digit Subsidy Unlock Code, again. Device should say: "Network Lock Deactivated" Phone may automatically reboot

*The 16 digit code can be obtained by calling the Mobile Operator Customer Care Department and given the representative the IMEI number. In exchange they will give you the Subsidy Unlock Code. Alternatively, you can go online and seek out a Subsidy Unlock site.
To obtain the IMEI number press *#06# on your mobile device.

Thank you for using Fixya! Enter the 16 digit Subsidy Unlock Code, again. Device should say: "Network Lock Deactivated"
Phone may automatically reboot

Dec 18, 2010 | LG Xenon GR500 Cell Phone

2 Answers

I have a99 mercury mountier with anti theft problems some times it won't start with out resting the system through the door lock click 3 times what's up?


are you using a copy of the original key

you need to use the original key for the car

Antitheft and Alarm Systems: Description and Operation
ANTI-THEFT
The passive anti-theft system (PATS) uses radio frequency identification technology
to deter a driveaway theft. Passive means that it does not require any activity from
the user.
The PATS uses a specially encoded ignition key. Each encoded ignition key contains a
permanently installed electronic device called a transponder. Each transponder
contains a unique electronic identification code, with over 72 million billion
combinations.
Each encoded ignition key must be programmed into the vehicle powertrain control
module (PCM) before it can be used to start the engine. There are special diagnostic
procedures that must be carried out if new encoded ignition keys are to be
configured.
The encoded key is larger than a traditional ignition key. The key does not require
batteries and should last the life of the vehicle.
The transceiver module communicates with the encoded ignition key. This module is
located behind the steering column shroud and contains an antenna connected to a
small electronic module. During each vehicle start sequence, the transceiver module
reads the encoded ignition key identification code and sends the data to the PCM.
The control functions are contained in the PCM. This module carries out all of the
PATS functions such as receiving the identification code from the encoded ignition
key and controlling engine enable. The PCM initiates the key interrogation sequence
when the vehicle ignition switch is turned to ON or START.
The PATS function uses the PCM to enable or disable the engine. All elements of PATS
must be functional before the engine is allowed to start. If any of the components
are not working correctly, the vehicle will not start.
PATS uses a visual theft indicator located on top of the instrument panel. This
indicator will prove out for three seconds when the ignition switch is turned to ON
or START under normal operation. If there is a PATS problem, this indicator will
either flash rapidly or glow steadily (for more than three seconds) when the ignition
switch is turned to ON or START. PATS also "flashes" the theft indicator every two
seconds at ignition OFF to act as a visual theft deterrent.
The PATS is not compatible with aftermarket remote start systems, which allow the
vehicle to be started from outside the vehicle. These systems may reduce the vehicle
security level, and also may cause no-start issues. Remote start systems must be
removed before investigation of PATS-related no-start issues.

The PATs key is used on the following Ford family trucks and suvs:

FORD: 1996-2001 MUSTANG, TAURUS
1998-2000 CONTOUR
1998-2001 CROWN VICTORIA
2000-2001 FOCUS
2002 THUNDERBIRD
1997-2001 EXPEDITION
1998-2002 EXPLORER
1999 F-250 LD
1999-2001 F-150, RANGER, WINDSTAR
2000-2001 EXCURSION
2001 ESCAPE
LINCOLN: 1997-1998 MARK VIII
1998-2001 CONTINENTAL, TOWN CAR
2000-2001 LS
1998-2001 NAVIGATOR
2002 BLACKWOOD
MERCURY: 1996-2001 SABLE
1998-2000 MYSTIQUE
1998-2001 GRAND MARQUIS
1999-2001 COUGAR
1998-2002 MOUNTAINEER

Additionally, PATs can be found on the follow Ford family cars and mini-vans:

1998-up Contour
1997-up Crown Victoria
1999-up Escort
2000-up Focus
1996-up Mustang and Taurus
1998-up Windstar
1998-up 2000-up Lincoln LS
1998-up Lincoln Mark VIII, Lincoln Continental and Lincoln Town Car
1997-up Mercury Grand Marquis
1998-up Mercury Mystique
1996-up Mercury Sable

Following are the instructions for programming a blank key (you must have at least one working key for this procedure).

The PAT

1. Make sure you have both keys.
2. Turn on car but don't start. Watch "theft" indicator untils it goes out.
3. Turn off and repeat procedure with second key.
4. After "theft light goes out, insert new key and turn on.
5. Wait until the theft indicator goes off and then turn off switch.
6. Wait thirty seconds. New key is now programmed into security module. Repeat for any other keys.


1. Erase any old codes by entering the factory code.(buttons will light up)
2. Press 1/2 button within 5 seconds.
3. Press 7/8 and 9/0 buttons at the same time within 5 seconds.

To set new code:

1. Enter factory code (numbers will light up)
2. Press 1/2 button within 5 seconds.
3. Enter personal 5 digit code(decide beforehand) within 5 seconds of each previous one.
To unlock all the doors,press the 3/4 button within 5 seconds of the driver door unlocking.
To lock all doors and set alarm system,press 7/8 and 9/0 at the same time.
To disarm or reset a triggered alarm,just enter personal or factory code.

Do not set a code with five of the same consecutive numbers. It's too easy for thieves to figure out.

Deactivating and Activating Autolock

To deactivate the "autolock":
With all doors and tailgate closed but NOT locked,and ignition OFF.
1. Enter 5 digit code
2. While holding 7/8 button in, press and release the 3/4 button.
3. Release 7/8 button
The horn will chirp once if the "autolock" was deactivated
or two times if "autolock" was activated.

To reactivate the system,repeat steps 1 thru 3

Alternate Method To Deactivate And Activate Autolock

Do steps [1] through [5] (below) within 30 seconds or you'll have to do it over. If you have to do it over, wait 30 seconds between attempts.
Close all doors securely.

1.Turn the ignition key to ON.

2.Press the power door UNLOCK control THREE times.

3.Turn the ignition key from ON to OFF.

4.Press the power door UNLOCK control THREE times.

5.Turn the ignition key back to ON .The doors should lock and unlock.

6.Press the power door UNLOCK control. The horn should chirp ONCE to confirm successful switching of the autolock system

Troubleshooting:

The engine does not start and LED remains off.
1. Check PATS system fuses
2. If alarm is fitted check if LED functions for alarm: if not check cigar lighter fuse (also used for LED)
3. If not go to main dealer

Engine does not start: LED flashes rapidly Leave ignition on until the LED starts to flash a 2 digit code: (sequence- pause-sequence)
Check the following codes:
Code flashes:
1:3 Key code not received. Is key screened by other keys or objects? Try different key: if okay then first key is faulty. If not go to main dealer
1:4 Partial code only received. Try again. If not okay use different key. If not go to main dealer
1:5 Key not programmed into PATS. Program key as above using master
1:6 Faulty link between PATS module and EECV Go to dealer .

Dec 05, 2010 | 1997 Mercury Mountaineer

2 Answers

Need to find a way to disarm alarm for Ford Contour Sport, 1996. Also it will not start


Many Ford trucks, vans and suvs use PATs (passive anti-theft) keys. These keys prevent someone from copying your key to a blank and using the blank. There is a small chip in the key which the vehicle must recognize before it will start.
PATS is Ford Motor Company's passive anti theft system. In 1996 it started showing up on select models of Ford and Lincoln Mercury vehicles. The keys for these vehicles have a tiny radio frequency transponder imbedded in the plastic Head.
pats_key.gifWhen you attempt to start the vehicle, the onboard computer sends out a RF signal that is picked up by the transponder in the key. The transponder then returns a unique RF signal to the vehicle's computer, giving it the ok for the vehicle to start and continue to run. This all happens in less than a second, and is completely transparent to the vehicle operator. It is a very effective system that does its job without the vehicle owner having to think about it, or modify his / her usual routine.
The PATs key is used on the following Ford family trucks and SUVS:
1998-up F-150
1998-up Expedition
2000-up Excursion
1998-up Explorer
1998-up Ranger
1998-up Lincoln Navigator
1998-up Mercury Mountaineer


Additionally, PATs can be found on the follow Ford family cars and mini-vans:
1998-up Contour
1997-up Crown Victoria
1999-up Escort
2000-up Focus
1996-up Mustang and Taurus
1998-up Windstar
1998-up 2000-up Lincoln LS
1998-up Lincoln Mark VIII, Lincoln Continental and Lincoln Town Car
1997-up Mercury Grand Marquis
1998-up Mercury Mystique
1996-up Mercury Sable
Following are the instructions for programming a blank key (you must have at least one working key for this procedure).
The PAT
1. Make sure you have both keys.
2. Turn on car but don't start. Watch "theft" indicator untils it goes out.
3. Turn off and repeat procedure with second key.
4. After "theft light goes out, insert new key and turn on.
5. Wait until the theft indicator goes off and then turn off switch.
6. Wait thirty seconds. New key is now programmed into security module. Repeat for any other keys.


1. Erase any old codes by entering the factory code.(buttons will light up)
2. Press 1/2 button within 5 seconds.
3. Press 7/8 and 9/0 buttons at the same time within 5 seconds.

To set new code:

1. Enter factory code (numbers will light up)
2. Press 1/2 button within 5 seconds.
3. Enter personal 5 digit code(decide beforehand) within 5 seconds of each previous one.
To unlock all the doors,press the 3/4 button within 5 seconds of the driver door unlocking.
To lock all doors and set alarm system,press 7/8 and 9/0 at the same time.
To disarm or reset a triggered alarm,just enter personal or factory code.

Do not set a code with five of the same consecutive numbers. It's too easy for thieves to figure out.

Deactivating and Activating Autolock

To deactivate the "autolock":
With all doors and tailgate closed but NOT locked,and ignition OFF.
1. Enter 5 digit code
2. While holding 7/8 button in, press and release the 3/4 button.
3. Release 7/8 button
The horn will chirp once if the "autolock" was deactivated
or two times if "autolock" was activated.

To reactivate the system,repeat steps 1 thru 3

Alternate Method To Deactivate And Activate Autolock

Do steps [1] through [5] (below) within 30 seconds or you'll have to do it over. If you have to do it over, wait 30 seconds between attempts.
Close all doors securely.

1.Turn the ignition key to ON.

2.Press the power door UNLOCK control THREE times.

3.Turn the ignition key from ON to OFF.

4.Press the power door UNLOCK control THREE times.

5.Turn the ignition key back to ON .The doors should lock and unlock.

6.Press the power door UNLOCK control. The horn should chirp ONCE to confirm successful switching of the autolock system.


Hope this help you (remember comment and rates this).

Apr 04, 2010 | 1996 Ford Contour

1 Answer

UNLOCK LG XENON PHONE


Unlocking LG Xenon step by step:
-1 After turning on your mobile phone, press: *#865625#
-2 Press Yes to continue.
-3 Enter the 16 digit Subsidy Unlock Code
-4 Enter the 16 digit Subsidy Unlock Code again.
-5 Device should say: “Network Lock Deactivated”

Dec 06, 2009 | LG Xenon GR500 Cell Phone

3 Answers

LHJ001 WIRING


I have the 1995-97 Lincoln Continental Alarm, Remote Starter, Keyless Entry Wiring, review it:

b94b6e9.png


Hope helped.

Oct 30, 2009 | 1996 Lincoln Continental

1 Answer

Keypad door lock does not work..?


it's in owner manual. But, first you have to enter your original code and it must work. then you press the 1 button and then enter a new 5 digit code, then press the 1 button again.

Keyless Entry Keypad To unlock the driver front door (20124) , and disarm the anti-theft alarm control (19A366) , (if equipped):
  • Enter the permanent factory code.
  • Enter the owner's alternate code.
To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver door or luggage compartment. To unlock the luggage compartment door (40110), press the 5/6 button within five seconds of unlocking driver or passenger door(s). To turn on the courtesy lamps and light all illuminated components, lift either front door handle (22404) or press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time with all doors closed. (It is not necessary to enter the key code first.) This will turn off courtesy lamps and arm anti-theft alarm control (if equipped). To program an alternate code:
  1. Enter the five digit permanent entry code into keyless entry keypad .
  1. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code.
  1. Enter any alternate five digit code within five seconds of pressing 1/2 button.
    • Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code:
      • 9/0 — no memory recall
      • 1/2 — memory seat position 1
      • 3/4 — memory seat position 2
      • 5/6 — memory seat position 3
    • After successful programming, the doors will signal by locking and then unlocking.
---------------------------------------------
  • Keyless Entry Keypad Does Not Work Properly
  • Circuit.
  • Keyless entry keypad.
  • Electronic door lock control processor.

  • Open Fuses:
    • Town Car and Crown Victoria/Grand Marquis
    • Power Distribution Box (under hood)- K, 40A (Maxi)
    • Instrument Panel Fuse Panel - 17 (10A), 10 (20A), 8 (15A), 5 (15A) and 4 (10A)
  • Loose Connectors
  • Corroded Connectors
  • Oct 04, 2009 | 1995 Lincoln Town Car

    1 Answer

    Need to reprogram key less entry. 2002 Ford explorer sport.


    Keyless Entry Keypad FAQ Ford Explorer
    The keypad can be operated with the factory set 5-digit entry code
    You can use the keyless entry keypad to
    • Lock or unlock the doors without using a key.
    • Open the liftgate window.
    • Activate or deactivate the autolock feature.

    Where the code can be found
    • This code is located on the owner's wallet card in the glove box
    • Is available from your authorized dealer via scan code
    • Is marked on the computer module

    Computer Module location
    • 1995 thru 2001 is located in the jack storage compartment in the rear of your Explorer. First remove the panel to the jack storage compartment. Towards the front of this area you should see a metal box this is your auto-lock module(way up front next to your rear left passenger seat). On the back side of this is your 5 digit code factory preset code. It is hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done.

    • 2002 thru 2007 is in the right panel behind the middle row window. It is below the seat belt mechanism. You have to pull out the top plastic panel off, then loosen the lower panel to be able to see the face of the computer module. The code is on a sticker on the face of the module.

    Programming a personal entry code The factory set code cannot be reprogrammed but you can create your own 5�digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.
    Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

    • 1. Enter the factory set code.
    • 2. Within five seconds press the 1 � 2 on the keypad.
    • 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
    • 4. Press 1 � 2, 3 � 4 or 5 � 6 to indicate which of the three personal entry code positions you wish to use.
    • 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.
    Tips:

    • Do not set a code that uses five of the same number.
    • Do not use five numbers in sequential order.
    • The factory set code will work even if you have set your own personal code.
    • If you program a code to a position that already contains a set code, the previously-set code will be erased.

    Erasing personal code
    • 1. Enter the factory set 5�digit code.
    • 2. Within five seconds, press the 1 � 2 on the keypad and release.
    • 3. Press and hold the 1 � 2 for two seconds. This must be done within five seconds of completing Step 2.
    All personal codes are now erased and only the factory set 5�digit code will work.

    Anti-scan feature If the wrong code has been entered 7 times (35 consecutive button presses), the keypad will go into an anti-scan mode. This mode disables the keypad for one minute and the keypad lamp will flash.

    The anti-scan feature will turn off after
    • One minute of keypad inactivity.
    • Pressing the UNLOCK control on the remote entry transmitter.
    • The ignition is turned to the 3 (ON) position.

    Unlocking and locking the doors, liftgate and liftgate window using keyless entry
    • To unlock the driver�s door, enter the factory set 5-digit code or one of the vehicle�s personal codes.
    • Each number must be pressed within five seconds of each other. The interior lamps will illuminate.
    • To unlock all doors and liftgate, press the 3 � 4 control within five seconds.
    • To open the liftgate window, press the 5 � 6 control within five seconds.
    • To lock all doors, liftgate and liftgate window, press the 7 � 8 and the 9 � 0 at the same time.

    • Note: The driver�s door must be closed. You do not need to enter the keypad code first.

    Deactivating/activating autolock
    • Your vehicle comes with the autolock feature enabled.
    Note: The autolock feature can be activated/deactivated independently of the autounlock feature.
    Before following the activation or deactivation procedures, make sure that the anti-theft system is not armed, ignition is in the 1 (OFF/LOCK)position, and all vehicle doors, liftgate and liftgate window are closed.
    *Keyless entry key pad procedure

    • 1. Turn the ignition to the 1 (OFF/LOCK) position.
    • 2. Close all doors, the liftgate and liftgate window.
    • 3. Enter 5�digit entry code
    • 4. Press and hold the 3 � 4. While holding the 3 � 4 press the 7 � 8.
    • 5. Release the 7 � 8.
    • 6. Release the 3 � 4.
    The user should receive a horn chirp to indicate the system has been disabled or a chirp followed by a honk to indicate the system has been enabled.
    Autounlock The autounlock feature will unlock all the doors when: � the ignition is in the 3 (ON) position, all the doors are closed, and the vehicle has been in motion at a speed greater than 12 mph (20 km/h); � the vehicle has then come to a stop and the ignition is turned to the 1 (OFF/LOCK) or 2 (ACC) position; and � the driver door is opened within 10 minutes of the ignition being transitioned to the 1 (OFF/LOCK) or 2 (ACC) position.
    Note: The doors will not autounlock if the vehicle has been electronically locked before the driver door is opened.

    Deactivating/activating autounlock - Keyless entry key pad procedure Your vehicle comes with the autounlock feature activated.

    • 1. Turn the ignition to the 1 (OFF/LOCK) position.
    • 2. Close all doors, the liftgate and liftgate window.
    • 3. Enter 5�digit entry code
    • 4. Press and hold the 3 � 4. While holding the 3 � 4 press the 7 � 8 twice.
    • 5. Release the 7 � 8.
    • 6. Release the 3 � 4.
    The user should receive a horn chirp to indicate the system has been disabled or a chirp followed by a honk to indicate the system has been enabled.
    The keyless entry touch pad can use two codes. The factory code and one
    personal code .
    To program your own personal code, select a 5 digit code that doesn't use 5 digits in
    sequence or the same button 5 times.
    Enter your factory code
    Within 5 seconds press the 1/2 button
    Within 5 seconds of pressing the 1/2 button, enter your 5 digit personal code,
    pressing each digit within 5 seconds of the previous digit.
    You can now use either code to operate the keypad

    Setting FOB to work with your vehicle
    1. Sit in car, doors closed. Electronically unlock all doors using the power door unlock switch on the driver's door.
    2. Insert key into ignition switch and turn from OFF to ON 8 times within 10 seconds with the 8th time ending in the ON position. (5 times on some models)
    3. The doors should lock and unlock by themselves to signal programming mode.
    4. Using your remote: lock the doors.

    Sep 16, 2009 | 2002 Ford Explorer Sport Trac

    2 Answers

    Auto Lock Activation


    Deactivating/activating autolock
    There are 3 methods to enable/disable this feature. One through your
    dealer, the second with a power door unlock/lock sequence and the third
    with the keypad.
    Before following the activation or deactivation procedures, make sure
    that the anti-theft system is not armed, ignition is off, and all vehicle
    doors, liftgate and liftgate window are closed.
    Controls and features
    Power door unlock/lock
    procedure
    You must complete steps 1-5 within
    30 seconds or the procedure will
    have to be repeated. If the
    procedure needs to be repeated,
    you must wait 30 seconds.
    1. Turn the ignition key to ON.
    2. Press the power door unlock control three times.
    3. Turn the ignition key from ON to OFF.
    4. Press the power door unlock control three times.
    5. Turn the ignition back to ON. The horn will chirp.
    6. Press the unlock control, then press the lock control. The horn will
    chirp once if autolock was deactivated or twice (one short and one long
    chirp) if autolock was activated.
    7. Turn the ignition to OFF. The horn will chirp once to confirm the
    procedure is complete.
    Keyless entry key pad procedure
    1. Enter 5 digit entry code
    2. Press and hold 7/8 control
    3. Press and release 3/4 control
    4. Release 7/8 control.
    The user should receive a horn
    chirp
    to indicate the system has
    been disabled or a chirp followed by
    a honk to indicate the system has
    been enabled.
    Smart unlock
    This feature prevents the driver’s door from locking while the key is in
    the ignition. This feature will unlock only the driver’s door if the key is in
    the ignition cylinder, the driver’s door is ajar and all doors are locked
    using the interior trim switch. If these conditions are met, the entire
    vehicle will lock and the driver’s door will unlock within 1 second.
    Controls and features
    127

    May 15, 2009 | 2002 Ford Explorer

    Not finding what you are looking for?
    2005 Harley Davidson FLHRS - FLHRSI Road King Custom Logo

    365 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Harley Davidson Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4536 Answers

    Mike

    Level 3 Expert

    4340 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Are you a Harley Davidson Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...